Find contentFirefox551, on Mar 12 2009, 05:36 PM, said:
Ok, so here's the problem. I recently sold my friend a modded big blast that he commisioned me for, and he went and showed it to all the airsoft junkies in my school, and now someone else wants a big blast. I am hoping for more buisness in the future, so I really need to fix this problem. And the problem is ..... that the pumps on the previous two I have purchased have been faulty. It seems that the O-ring is not thick enough to make a good seal with the pump tube. I tried fixing one by putting E-tape under the o-ring in order to rase it, but that didn't work. I fixed another with an O-ring from an oldstyle big blast, but I don't have any more. So my question is, has anyone had this problem, and does anyone know how to fix it. If it comes down to this, which I hope it wont, I could just buy new O-rings for each big blast I buy, but I wouldn't know where to get those either. Advice will be most welcome, and will help to spread the spirit of nerf.
Yes, A lot of big blast are like that now. All you have to do is find a old nitefinder o-ring And slide it on with the original big blast o-ring.
