LiKnSmAkScOmIn

http://www.360hacker...en-in-the-wild/

That's awesome. I feel kinda sorry for the kid's dad though.

http://winterson.com...ke-of-west.html

Have fun.

So, I'm working on rebirth of my SM500 and putting it into the shell of a newstyle 1500.

Here's the thing:
The firing pin doesn't go all the way back in after I pull it back, but this can be solved with a rubber band.
The firing pin can wiggle, and sometimes if I move it around air leaks.


The reason I'm asking for JLego/Black Wrath is because I know you two have dissected an SM5000 valve which is the same construction as the valve on a SM500.

My question: Is the hook at the end of the firing pin supposed to be glued onto the piece holding the rubber seal? I cut the pump off the airtank, and noticed it can move around quite a bit.

Stolen from JLego's old topic, this is the pin+hole I'm talking about.
http://img53.imagesh...ofopenvalve.jpg

Just wondering, does anyone know what to do with those ugly blue marks that jeans leave on your shoes? I wear all white adidas and it makes them look dirty and takes a while to clean off. I've heard somewhere that washing the bottom part of each leg in vinegar solves it, but does anyone else know anything about it?

My friend attempted to mod his maverick, and he just threw out the poles and there's no getting them back. Of course, you know about the major air leakage now. I just wanted to know what's a good way to seal between the stubs and the barrels the dart goes in? I read about how you use FBR in a circle around the stub, but I was wondering if I could get a picture of it?