Find content
Like on my TTG mod, a new barrel gives a tighter fit around the barrel, so more pressure can build. Pressure is the one thing that makes nerf guns work, and in the old barrels some of the pressure is lost because it escapes around the dart.
Replacing the barrel is about the cheapest thing you can do to it, a 10 foot thing of PVC only costs 3.00.
- NerfHaven
- → Viewing Profile: Posts: dsman195276
dsman195276
Member Since 07 May 2008Offline Last Active Oct 11 2008 10:37 AM
Community Stats
- Group Members
- Active Posts 16
- Profile Views 3,016
- Member Title Member
- Age Age Unknown
- Birthday Birthday Unknown
User Tools
Latest Visitors
Posts I've Made
In Topic: Barrel
12 August 2008 - 07:12 AM
In Topic: Recon Problems.....we Got Work To Do
10 August 2008 - 08:35 PM
Well, for the short life me recon lived it worked fine. The plunger never broke for me. I don't know why it is breaking but you might want to try putting something like foam to pad the plunger when it hits the barrel. Thats the problem with inverted plungers, the back directly hits the barrel. Thats not normally a problem since the AR in the recon acts like a pad, making the plunger slow down before it hits the barrel, but with out it the barrel takes the full force of the spring.
Edit: KingCosmo7 beat me to it.
Edit: KingCosmo7 beat me to it.
In Topic: Newer Recon?
10 August 2008 - 12:18 PM
Yes, I have one. as far as I can tell all they did was get rid of the dead space in the plunger and make it smaller. All you have to do is cut off the black part that come out the back of the gun to make a spring add-on work. I think this could work to our advantage if you make that cap longer and then stick a spring in there. Then you don't need the stock always attached.
In Topic: Easiest Gun To Mod
10 August 2008 - 12:12 PM
Heres a thought, why don't you just open the gun up?
Just go get a NF, the chances that you can break it by opening it up are very slim.
In theory you could just drill down the end of the barrel to get the AR out on most guns if you really want to but you have a better chance of messing up if you do that, you could punch a hole in the side of the barrel.
Just go get a NF, the chances that you can break it by opening it up are very slim.
In theory you could just drill down the end of the barrel to get the AR out on most guns if you really want to but you have a better chance of messing up if you do that, you could punch a hole in the side of the barrel.
In Topic: Nova's Recon Mod.
09 August 2008 - 06:33 PM
I broke my recon a while back. I was thinking about buying another one, and doing the same mods with some more I thought of but then the vulcan came out. I'm just saving up my money until I can get it, which may take a while since I have marching band camp all next week.
on topic:
It's a good little write up, bigger pictures could be nice, but I can understand what you did here with these ones, good job!
on topic:
It's a good little write up, bigger pictures could be nice, but I can understand what you did here with these ones, good job!
- NerfHaven
- → Viewing Profile: Posts: dsman195276
- Terms of Service and Privacy Policy
- Code of Conduct ·
