So my first major mod was a longshot I put a brass breach in and a [k26] it works pretty well except for 1 major issue for a first mod. When I made the breech the little tooth that sticks out broke off and I didnt feel the need to replace it with a brass one at the time as I assumed it would feed fine. However I realized without it my longshot will only feed full lengths which fish tail to no end. Anyway to fix this short of brassing a new bolt or putting in a worker breech and barrel? Also I'm using a talon mag.
I'm tried to put solder over the connections where the thermistor was after removing the thermistor to no avail. The spots with the least amount of solder are the ones are where the thermistor was.
Yea as the title says only would like superstock/nic. I really can't go to wars except there as tobgo to another big town is around 3 hrs away from where I live.
I have an evader that i ordered imrs and dummies for that i am going to mod but don't know what to do about a few things. First it won't rev unless a mag is in it if i take out the button that the mag presses. If i take the button out but not the circuit will it still rev? Any other small mods i should do to it that only cost a few bucks to nothing.
(ps. I don't want this to become a war on imr vs lipo i looked at a nice lipo setup that was around 60$ but none of my friends mod so having that much power is pointless. Also I know i have to remove thermistor and have the equipment)
Find content
