- NerfHaven
- → Viewing Profile: Topics: Nerf Warrior
Nerf Warrior
Member Since 05 May 2005Offline Last Active Jan 30 2007 06:43 PM
Community Stats
- Group Members
- Active Posts 88
- Profile Views 5,031
- Member Title Member
- Age Age Unknown
- Birthday Birthday Unknown
Topics I've Started
Mod For The Lightstorm
12 June 2005 - 09:09 AM
I got this gun and I was just curious if there was any good mods for it. If you have one I would appreciate it.
Micro Mega Darts
11 June 2005 - 09:20 AM
Here is a good thing to do if you want the same ranges as stefans but you don't have the time to get all the materials. All you need for this is a micro dart body and a mega dart tip. Put the two together with whatever (tape, hot glue, etc.) and bingo, you have a super fast and far traveling micro mega dart.
Worth Buying?
09 June 2005 - 06:58 PM
Is the Lightstorm a good gun and is it worth buying?
Possible Mav Mod
09 June 2005 - 06:56 PM
Ok, I was looking at my Mav and I thought of cutting off the front part and single barreling it. Is this a good idea?
My Supermaxx 250 Mod
07 June 2005 - 04:11 PM
Ok, we all know that this is a crapy gun but with this single barrel mod it can become a decent sidearm. Here are the materials you need:
Crayola barrel
Mini Screwdriver
Dremel
Electrical tape
Here is the mod: Take the SM250 apart and take out the 4 rotating barrel. Then take the black tube and cut it just on the edge where it used to push air into the rorating barrels so there is more space for the air to travel through. After this, cut just enough of the gun off so the crayola barrel can fit through because there is a tiny opening so it wouldn't be able to go in there. After this, put the crayola barrel in about 2 cm into the black tube and either electrical tape it or glue it in. After this I put electrical tape around the crayola barrel so it looked cooler. Put all the interals of the gun back in except the 4 rotating barrel. The ranges I got with this gun are about 40-50 feet ever time. I hope you all enjoy this mod
Crayola barrel
Mini Screwdriver
Dremel
Electrical tape
Here is the mod: Take the SM250 apart and take out the 4 rotating barrel. Then take the black tube and cut it just on the edge where it used to push air into the rorating barrels so there is more space for the air to travel through. After this, cut just enough of the gun off so the crayola barrel can fit through because there is a tiny opening so it wouldn't be able to go in there. After this, put the crayola barrel in about 2 cm into the black tube and either electrical tape it or glue it in. After this I put electrical tape around the crayola barrel so it looked cooler. Put all the interals of the gun back in except the 4 rotating barrel. The ranges I got with this gun are about 40-50 feet ever time. I hope you all enjoy this mod

- NerfHaven
- → Viewing Profile: Topics: Nerf Warrior
- Terms of Service and Privacy Policy
- Code of Conduct ·