Encountered some difficulties on opening this blaster.
I bought 4 of these, although they don't ship to SoCal from Amazon. Got around that by buying it through their eBay store.
I've managed to crack the Eradicator open with a saw. A dremel or hot blade could work just as well for the threaded end of the barrel that is glued to the shell of the blaster.
IMG_4620.jpeg 74.04KB 11 downloads
Line up the cut as well as possible to the gap between both halves of the shell.
IMG_4621.jpeg 69.78KB 9 downloads
There is blue cover on the handle that hides two screws. There are notches that hold it in place. Use a screwdriver to pry that off.
IMG_4624.jpeg 75.39KB 11 downloads
IMG_4625.jpeg 69.85KB 11 downloads
Remove all the screws and there you go.
IMG_4627.jpg 129.85KB 11 downloads