Raiden

Well my pride and joy, my brassed sm1500, has just given me a little hiccup, it seems to have developed a slow air leak, it will fire like a cannon right after you pump it but if you wait a minute or so then it will lose almost all its pressure. So I pumped it up and put it underwater to find out the source of my issues, and the leak appears to be the spot where the trigger pin comes out of the back of the air tank. Does anyone have any ideas about how to save my baby? Has anyone ever fixed something like this before?
After some searching I see that jangadance has had the same issue I have, if you are out there janga did you ever manage to get anywhere fixing it?

Having just modded my newly found larami supermaxx 1500 I am having an issue I have never had to deal with before. If I shoot it close range at a target, like a piece of cardboard or styrofoam, often the foam will bounce off, but the weight and hotglue front will be fired straight through the target. I have done this with heavy cardboard and a very dense three inch piece of styrofoam. I am slightly worried about shooting a person and having the foam stop but the weight fly through them, any ideas?

Alrighty, I have a heavily modded supersoaker that has a huge amount of hot glue stuck to it from all the work I have done with it. Whats the best way to get it all off at once? When I say a lot I mean that theres a layer of hot glue over parts of it. It seems to be beyond my humble skill with needle nose pliers to get it off that way.

Thanks

Ok, I am trying to figure out how I can mod my mad hornet so it doesnt completly suck. The problem is that since the pump/tank/valve/trigger are all built in one big piece I cant take it apart without screwing up the tank. Also the trigger system is gimped, the air output is also the trigger which is fired by having part of the barrel push down on the valve pin.so the air delivery system has one piece pusing down and one pushing up and then for some dumb reason the barrels arent actually glued into the rotator so there are 4 places this gun can leak air before you even get to the barrel =(I can not figure out how to get rid of these leaking points without screwing up the gun, and because of the way it is build I cant even single barrel mod the damn thing. Any ideas?