Jump to content


Bryansuh

Member Since 20 Oct 2016
Offline Last Active Feb 17 2017 05:49 AM

Posts I've Made

In Topic: Has anyone ever done a RL crossbow-like prime?

16 February 2017 - 06:45 PM

Aww. Thanks anyway.
But think about it.
57lb= 200fps. So 130=200×2^1/2= 300fps.

I saw a bike pump Longshot that did 400fps. So maybe some one, somewhere made this....

In Topic: I'm Scared My Gun Might Blow Up In My Face

08 November 2016 - 09:12 AM

You could, as dangerous as this sounds, unscrew the thing, smother each screw in some sort of glue or epoxy, and then screw it back in for additional support

but then i couldnt get the springs back.... the retaliator costs 45 freakin bucks in korea alone.... also it seems pretty stable. although the smart AR is getting a bit glitchy. sometimes it works some times not. but the increase in accuracy and sheer power is probably worth it.


In Topic: Has Anyone Made a Mod for the Centurion?

08 November 2016 - 09:07 AM

thats not much of a mod... adding a triad spring to a strongarm is more of a mod than that. AR mods are pretty much the first thing you do as soon as you get a new gun.

 

btw the triad/strong arm thing is REALLY loud. but the power has increased significantly

 

Also do the buzz bee mags work fully? like the bullets actually fit and the gun can actually keep the mag in place? i dont have one so i cant test it.


In Topic: Before Coming to Korea

08 November 2016 - 09:04 AM

i know. iv been trying to cut a spring to the right length with a multitool. i highly recommend it. its great exercise of the fingers and patience. so far i dented the surface a bit, no change in performance

 

i live in seoul btw, the capital city. and HOW DO HARDWARE STORES NOT HAVE POWER TOOLS!!??!? 

 

i probably should buy stuff online but i really hate doing that. also im technically underaged so mom or dad has to buy stuff for me. and i dont have an allowance and getting a part time job is super extremely erotic in korea... and i fought with my mom recently. so..... not happening any time soon

 

XD 


In Topic: Stuck screw

25 October 2016 - 06:34 AM

Lol

what i usyaly do is I get a drill and drill the crap out of the shell untuil it gets out but that my not wotk in your situarion

I don't have a drill. Even if I did I probably won't do it.

Have you drilled a hole dead center in the back to reveal the screw that holds it all together? Also try heating up the area with a hair dryer or heat gun (set on very low heat) to destroy any threadlocker present.

what? 2 screws on the bottom won't come out. I just want to upgrade the spring and seals not disassemble it completely.

Thanks but what I'm hearing is... I'm screwed.
Goddamn it the triad costs 12 dollars in Korea...