Telerran

So the modulus has a different flywheel cage and as such it needs different flywheels. If you want a custom flywheel cage for it Dr Snikkas is the only one who currently makes them.

Both the worker and the artifact flywheels are good doe the stryfe,the artifact ones are quieter but the increased weight will cause a slight drop in fps. Worker also makes different sized flywheels specifically for the modulus.

Cherry switches are good and will work pretty well for your builds though you might get slightly better performance from a 15a switch the difference isn't that big for 130 motors

As for a lipo what you want is one that's constant c value times in mAh (EDIT: meant Ah not mAh) is higher then the stall current of your motors so about 20. But if your not one for math 25-40c constant​(the lower number they give you) with as much mAh as you can fit should suit you just fine.

Don't really know much about lipo chargers so hopefully someone can help you with that but hope this helped some

Super stock pretty much just means full-length darts and that we are wary of homemades and blaster with homemade internals. If you looking at posts with fps number I'd say 120-130 fps maybe a little higher if your careful about using your secondary when your up close.

Hi Silly,

 

There is a group that does nerf wars around Portland a few times a year. Usually in Payson park or one of the other parks around the Portland suburbs. The facebook link is: https://www.facebook...50104891918003/Currently we don't have a event scheduled but as the snow starts to melt we'll start planning when to have our first war of the year. Most of the players run stock but we do allow super stock at the organizers digression. I run a stryfe off a 3s so as long as your not shooting people point blank with a heavily modded blaster it's normally not a problem.

 

We hope to see you on the battlefield,

Telerran

It might just be a lemon sadly it happens occasionally and though you might not be able to get a refund without a receipt it is a lot easier to get an exchange without a receipt if you still have the packaging. If you did get rid of the packaging already you should look into the timing issue that's common with the eat. it's an issue where the dart gate doesn't get out of the way in time and can cause the dart to get damaged during the forward prime, also if that is your issue it can shorten the life of the dart gate. The fix is just to glue a thin piece of plastic to the ramp at the front of the bolt sled.

If you can't find a way to fix it my strayven runs off a lipo so I could gut the metal pieces in the Rayven battery tray if you pay for shipping.