T3kn0Hazard

Psyk said that in order to get these that you have to use a secondary site such as Peeka. Is this the case or can you order directly from them and still get it?
If you used a secondary site would you be willing to share with us which one?
I am very interested in getting a few of these but feel it may not be worth the troubles of doing so.

So far I've heard many people call it a clutch.

Its a fairly easy mod on this water blaster only. Most of the rest require an internals swap
Most people just cut out the screen in the end of the nozzle.
But you can also add CPVC or whatever your preferred barrel material is.
or you can get crazy and try something like this:
https://www.youtube.com/watch?v=nRSnyQ3UTcw

I used testors enamel for all my detailing. They are about 1.79 in the model car section at michaels. And very seldom I'll use citadel. If you don't have the patience (like myself) to let each layer of paint dry for 30 min between coats then the citadel is tough, especially orange. I do have good luck with their blues and greens. As for dry brushing Just a metal c based acrylic of any sort.

It looks to be a screw without a head. Similar to some of the jolt plunger head pins.
Psyk has a good removal method on his jolts that may help.
I'm sure there are plenty of other youtubers with the info on the jolt pin removal as well.
but basically if you can pry it up enough to get some pliers around it and twist it out.
If that isn't it, it may be solvent welded on just the bottom portion to where you can boil if for just a bit then pry it out.
The very last option is that it may be like a Jolts handle pin to where it is scored on the opposite side from the head and may require ramming it out with the pressure of a thousand stampeding bulls.
Those are the only 3 options I can imagine knowing Nerf