Jump to content

  2. → Viewing Profile: Posts: aj1234119

aj1234119

Member Since 17 May 2011
Offline Last Active Jan 31 2012 03:20 PM

Posts I've Made

In Topic: plunger-push-prime blaster

24 November 2011 - 07:28 AM

Have you found the new version awkward to prime with a hopper and barrel attached, because the whole barrel assembly moves when you prime it?

In Topic: Shortened pumpsnap

29 July 2011 - 09:06 PM

Oh, sorry my fault for not reading the writeup thoroughly, i actually read that after i replied.

In Topic: Shortened pumpsnap

29 July 2011 - 08:39 PM

Well the plunger rod must be the length of the spring and the distance between the catch and the plunger head on a snap like the one you've built, while with a slotted plunger rod it just has to be the length of the spring, so if you built the blaster so the plunger rod touched the back of tee when primed, your style would have to be slightly longer.

In Topic: Shortened pumpsnap

29 July 2011 - 08:15 PM

I believe he said 6'' of draw.

I agree that this is a nice design, but the fault of this kind of pump action snap is that they will always be longer than the shortest slotted plunger rod pumpSNAPs with the same amount of draw, and the plunger rod will also be heavier, if only slightly. However, this is still a very nice blaster.

In Topic: How to make better Slug darts

09 July 2011 - 08:09 PM

This is a great writeup. Unfortunately, I have 1500 #8 washers left from the that I bought about half a year ago before I knew to buy #6's, and if I try to melt a hole for the #8's to sit in the foam is too thin, so I'm stuck with 1500 more bad slugs or 1500 useless washers.

  1. NerfHaven
  2. → Viewing Profile: Posts: aj1234119
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·