Jump to content


MattPaintballer

Member Since 22 Oct 2004
Offline Last Active Jul 15 2019 08:04 PM

Topics I've Started

Zero/unknown Breech

20 September 2005 - 05:57 PM

I was just looking at the Zero Breech thing under Homemades here on the Haven, and I started thinking. With that breech, you pull the 1/2" barrel out a bit, drop a dart in, and push the barrel back in. Well since PVC isn't extremely thing like brass or PETG, wouldn't the dart have a bit of trouble getting into the 1/2"?

So I was wondering if this would work: Do the same thing, but cut a hole in the 1/2" PVC too. Line up the holes and drop a dart in, then twist the 1/2" PVC. Would this work better or worse than the Zero breech, or not at all?

Gas Prices

31 August 2005 - 07:24 PM

I hope this isn't considered spam or against the rules. If it is, I apologize.

Sept. 1,3, and 11th are national no gas buying days.  If most of the country doesn't buy any gas on those days the oil companies will go near bankrupt and have to lower their prices to stay ahead.  Just something to think about.


Ompa

19 August 2005 - 02:21 PM

Happy birthday ompa!

Stay cool B) :lol:

Cutting Pvc

24 June 2005 - 10:43 PM

Okay, I'm wondering how you cut PVC and get a straight, precise, even cut? I'm using PVC cutters and they are never straight, it always cuts the barrel at an angle.

So what tool(s) do you use to cut PVC and get a good cut?

Unmodified Splitfire Troubles

28 May 2005 - 02:05 AM

I received an unmodded Splitfire from flamebo a couple days ago. I noticed that one barrel was shooting harder than the other. This was with stock megas. I twisted out the pegs and tried mega Stefans and stock megas again. Same thing.

Do Splitfires normally do this? Also, it's madly inaccurate. I would blame that on the poor quality of my Stefans, but it's with both Stefans and stock megas.

I'm going to PVC it and see if it helps.

Edit:

The barrel on the left (transparent side, second shot) shoots farther than the barrel on the right (solid side, first shot) if that helps.