29 replies to this topic

[sam]

Can't wait to get home and try this, I've got a hopefully amazing Idea.
What is the OD of the steel spacer? is it thin enough to fit in Sch. 80 PVC? The amount of range loss you have is astounding, i would expect much more. Could you post a full picture of the gun with this attachment on it.

[frost vectron]

The steel spacer O.D. is 1/2"

[six-five-two]

To anyone that wants to make an inline clip without PETG for taggers or suction darts (untested for suction darts). Take a piece of 1/2" PVC (not SCH40) cut it to a desired length like what nerfer34 did. Remember, taggers are about 2 1/2" long, so it may have to be a bit longer. Now cut a 3" piece of 1/2" SCH40 PVC and put a coupler connecting the 1/2" PVC and the 1/2" SCH40 PVC. Do what nerfer34 did, tilt the gun down, load, aim to target, shoot.

[keef]

Or you could make it the way it is, and make scumbag darts.

[six-five-two]

asshole darts? I just thought of making it like that because all my friends that nerf don't use stefans yet.