Javascript Disabled Detected

You currently have javascript disabled. Several functions may not work. Please re-enable javascript to access full functionality.

Suppressors

Started by Guest_DarkInfection_* , Apr 29 2007 07:29 PM

Please log in to reply
Image Archive

13 replies to this topic

#1 Guest_DarkInfection_*

Guests

Posted 29 April 2007 - 07:29 PM

Ok, so I just made a suppressor for my gun. It is about four inches long and made of-

9/16 brass with holes drilled in a spiral patern
Toilet Paper wraped on the brass
A 1" (ID) piece of Pvc as a sheath
Edit: The piece is about 3 inces long, covering all of the holes, leaving an inch of undrilled brass sticking out.

When I slide it (part of the way) on to my barrel, it fits nice and snug onto it. The gun I used is a Supermaxx 1500 plugged pump, pumped four times. What mine did was lowwer the pitch of the "wooshhh" when the dart is fired. Edit: neverminde, "silencing" a blowgun is usless and stupid.

Now I am just wondering if this is how everyone else makes them. My friends that I nerf with don't use silencers, so I have no idea how anyone else does this. I just want to know-

1. How other people make them, and

2. If all the suppressor is supposed to do is lowwer the pitch.

Edited by DarkInfection, 30 April 2007 - 05:33 PM.

0

Back to top

#2 Rambo

Fear the Robble...

Members
1,807 posts

Posted 29 April 2007 - 07:33 PM

Sound matters in a nerf war? News to me.

0

You have to dominate the swordfish, only then can you sauté it.

Back to top

#3 Guest_DarkInfection_*

Guests

Posted 29 April 2007 - 08:02 PM

It does sometimes, lets say is you run up behinde your opponent, and pop a few shots off, It could help if they can't hear you. Yes, i realize that sound isn't a key factor in nerf, but you shouldn't disregard it.

0

Back to top

#4 SHADOW HUNTER ALPHA

Member

Members
1,116 posts

Posted 29 April 2007 - 09:00 PM

Zero's Silencer. I'm working on a silenced Big Blast, but I'm not sure how the spiral porting will go, since I don't have any efficient drilling equipment.

0

The only commonly shared fate among us all is death. I turn to the shadows so that I may not be unfamiliar with hell's corridors when I arrive. - SHADOW HUNTER ALPHA

Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.

Back to top

#5 bobafan

Member

Members
635 posts

Posted 29 April 2007 - 09:30 PM

Why do you need a silencer on a blowgun?

0

thaygor: all i remimber is pumping it hard and shooting than trying to pump again

---

<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad

Back to top

#6 One Man Clan

TOFTS

Contributors
2,170 posts

Posted 29 April 2007 - 09:45 PM

Rambo, Dark Venereal Disease clearly hasn't had much if any nerf experience. Most of these types of threads show that. Figure out a way to increase your accuracy or rate of fire before you learn to shoot me more quietly. Just some advice.

0

I hate you.

Back to top

#7 bpso86

Member

Members
618 posts

Posted 29 April 2007 - 09:51 PM

Rambo, Dark Venereal Disease clearly hasn't had much if any nerf experience. Most of these types of threads show that. Figure out a way to increase your accuracy or rate of fire before you learn to shoot me more quietly. Just some advice.

I would have to agree. Have you (the OP) ever had a blowgun shot at you in a war before? From the distance I usually get shot at by them, I can't hear the dart or the air until the dart gets near me, and even then it's just the whooshing of the dart. They're quite silent weapons for the most part.

0

Back to top

#8 GothicWombat

Member

Members
9 posts

Posted 29 April 2007 - 10:13 PM

Rather than going through the trouble of making a silencer I'd just make the barrel longer, that way I improve my accuracy and range while quieting the weapon.

0

Back to top

#9 CaptainSlug

Resident Mad Scientist

Administrators
4,763 posts

Posted 30 April 2007 - 01:09 AM

If you can't hit anyone in the first two shots your problem is sucky aim, not noise production.

0

The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

Back to top

#10 Guest_DarkInfection_*

Guests

Posted 30 April 2007 - 07:51 AM

Well guys, I just put the suppressor on my SM1500 and I like it, also you guys are right, I dont have a blowgun, or very much nerf experience, but from the experience I have had, I should have liked to be quieter on my part, whether that be the noise I make from my guns or the noise I make from my clothes. I will get some pictures of the SM1500 up later.

Edited by DarkInfection, 09 July 2008 - 02:53 PM.

0

Back to top

#11 elf avec gun

Member

Members
490 posts

Posted 30 April 2007 - 02:19 PM

Although I agree that trying to have your fully silenced, accurate up-to 300 feet, nerf-sniprerifle is dumb and not really in the spirit of the game, I have found that certain guns of mine tend to be really friggen loud (ask carrtoon about my LS :blush:

). So loud infact, that it ticks off the neighbors. For something like this, I feel like a sound suppresion device might be warrented. I am not saying that this is the case here, just that silencing guns in nerf is sometimes ok.

Edited by elf_avec_gun, 30 April 2007 - 02:23 PM.

0

"It's hard to imagine a more specific subset of nerd than our community. One day we shall be studied by a single sociologist whom the other sociologists will mock incessantly." ~VACC

Got Nerd?

Back to top

#12 CaptainSlug

Resident Mad Scientist

Administrators
4,763 posts

Posted 30 April 2007 - 02:33 PM

In the more noisy Nerf guns (such as a longshot, mine is REALLY loud too) adding a suppressor isn't going to do jack squat because the noise isn't even coming from the barrel.

0

The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

Back to top

#13 Guest_DarkInfection_*

Guests

Posted 30 April 2007 - 05:35 PM

Yes, spring guns do make lots of noise, but thats not the point. What I was trying to do was successfully make a device to use on air(tank) guns that suppresses the noise. In my opinion, it was a success. Also I was not, I repeat was NOT trying to make some sort of dumbass sn- niping device, although the way I said things may have made it sound like that was my intention. Thanks for all of the input. Also, I am sure that you already know this, but adding some foam, like from a craft foam sheet to the plunger head helps a little, also if you fill in cracks of empty shell with some FBR, that helps to.

here is a picture-

Edited by DarkInfection, 30 April 2007 - 05:51 PM.

0

Back to top

#14 Jergling

Member

Members
69 posts

Posted 01 May 2007 - 03:49 PM

Rather than going through the trouble of making a silencer I'd just make the barrel longer, that way I improve my accuracy and range while quieting the weapon.

Longer barrels aren't always key, it's the volume of the barrel compared to the volume of air being pumped in. On a plunger gun the volume of the plunger tube should be a little more than the barrel's volume to acheive max efficiency. If the barrel has more volume than the plunger/input the dart will lose power while in the barrel, making it less efficient. That's why guns like the crossfire, nitefinder, and maverick (which hardly have any barrel) gain power from extended (more efficient) barrels.

Barrel Length.

0

Save the NOOB, now declared an indangered species by the department of the redundancy department!

Back to top

Back to General Nerf

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Suppressors

#1 Guest_DarkInfection_*

#3 Guest_DarkInfection_*

#10 Guest_DarkInfection_*

#13 Guest_DarkInfection_*

1 user(s) are reading this topic

Sign In