5162 replies to this topic

[dizzyduck]

Since I didn't do anything particularly remarkable with my ERTL Foam Shooter Shotgun (also commonly known as the PAS), and since I was too lazy to do a full write-up, I'll post these here.

Edited by dizzyduck, 21 June 2009 - 02:32 PM.

[Redmark]

THE HARPOON

[jerm78]

Recon cocked

[taerKitty]

YALPAM II - Longshot with two LSFGs side-integrated, controlled by a cable trigger.

[CoasterDynamix757]

SM1.5k from Angel himself! Regular modifications 9" long petg barrels, glued trigger, plugged pump PVC shealth, AR removal.



Pistol splat. Paintpall editon half of a cpvc coupler, minimization, redone plunger, locks and all other useless parts removed. BEST SIDE ARM EVER!!!!1!!!!!!11111! Gets ranges for around 85-95 feet flat and can pierce cardboard.



Half done longshot shell.

[1337]

Some projects I've wrapped up as of late:

Warning: HORRIBLE PAINTJOBS AHEAD!




Recently figured out that clear coat spraypaint dissolves paint pens.

[navyseal849]

I call it the Thunderhawk, its a maverick with the bottom of a LS magazine attached, I made a cardstock clip that holds six darts that I place in the magazine. Its stable, I have only had the clip fall out of the magazine once, (I was shaking it up and down for a minute) but the magazine is stable and I tested that by running around my house for a few minutes firing it occaisonally. It's mostly cosmetic but I added the clip inside the magazine for easierish reloads. It's just fun to fire sideways!

Plain view

With clip

The clip halfway out.
Sorry about the big pictures and yeah, I took a sharpie and added detail, (the fake bolts and grooves)
That splotch on the clip is my simplified signature.

[taerKitty]

Valentine Clip

Until the Raider comes out, something to tide over those of us in the "quantity, not quality" school of mis-marksmanship.

[A side of nerf]

Custom stock, pullback shotty.

[Lucian]

Sneak peak of a current WIP:








A thread and likely a write up will follow, but untill then feel free to Pm me.

On another note, I finished my Blade-Finder:

[Mr BadWrench]

My new Longshot "Elly"





just some aluminum tape and patience. the boltsled has 3 pieces on each side wrapped and folded, its quite strong.

Don

[Icey]

My CPVC breeched LongShot. It's not yet finished because I'm leaving for vacation in two hours .

[Merzlin]

'Bout time I got around posting:

[NerfRogue83]

Sneak Preveiw----"RogueScope" Rev.2
How do you take a good idea and make it better? The American way, Damnit!---Add more barrels!





Feel free to PM any questions boys and girls.---Rogue.

Edited by NerfRogue83, 23 June 2009 - 08:47 PM.

[HeracrossKid]

Not too good at painting.

[The Saint]

The Copperhead

Full Veiw

Front end

Mid veiw left side

Mid veiw right side

Butt end

Down the front

With Clip and scope mounted

Clip its self


Now The scope was a quick and easy build I just cut down the Recons light and then pulled out the guts leaving the switch. Wich I then took an onld lazer pointer and wired it in. with that done I threw on som pain and added in the lens from the long shot scope.

Full Veiw

Front veiw lazer on

Looking in the scope

[Lucian]

I did some work on my NiteFinder rifle (I need a new name for it...)



A close up of the 1mm rods between the natural lines of the plunger rod

I have been posting pictures in this thread because I still don’t feel like this gun deserves its own thread... but feel free to Pm about the gun

[umpshaplapa]

My just completed guns. First we have my spin0off of BS's Stormbringer, complete with pistol splat.

It's been Ice singled, but the barrel is PETG. I gooped a small piece of 5/8" brass on the barrel, and barely sanded out the tee coupler. It's 100% airtight.

Next is my brassed SM1.5K, brassed AT3K, and PETG'ed AT2K. Nothing that special.

Finnaly my longshot, angel breached, and with an awesome shotgun grip idea created by flatspunout on nerfhq. Here's a link.

[xtremejumpy]

My new child. Shoots much farther than it should (meh, 90's or 80'. Hard to prime though), but I needed it for the 2 on 15 rounds (which tend to happen sometimes)

Name? Someone shoot me a PM if you think you have an ORIGINAL name
EDIT: Never mind, Going to call it Lil' Rosie







Paint done by a friend. He'll paint for moneys. Thanks to AssassinNF, this was built over the course of 5 and 1/2 hours.

Edited by xtremejumpy, 25 June 2009 - 01:56 AM.

[CrazyIvan VI]

Well, I was going to wait to post this till I had the whole set complete, the rifle, pistol and shotgun, but since The Saint posted his up, my Longshot doesn't feel as special, so I figured I'd throw it out there before I finished everything else.

[AssassinNF]

LS/DTG (Grimm) with new trigger:


Back from the dead - my ZomBBB:



Yes, that's another Firefly turret, and yes, this one comes with a write-up. I'll try to post it tommorrow.

Also, I'm glad you like your new Doomsayer, xtremejumpy. I had fun building it with ya.

[lazer371]

My cpvc'd singled ls, with tactical rail that serves almost no purpose


Top view, this one is diffferent because I messed up a little while I was making it.


My singled cpvc'd longshot, the forgrip mod is for the breach that I made for it.


The breach closed,


the breach opened,


One of my 1/2 inch coupler'd nitefinders, with a speedloader





With the singled ls (on flat shot) I get about 95-100ft. average with stefans,and with the breached ls (on flat shot) I get about 90-95ft. average. With the nite finder(on a flat shot) I get about 65ft. average with stefans, the stefans I use are a little too heavy for my nite finders though.

Edited by lazer371, 26 June 2009 - 09:48 AM.

[KingBouyah]

Nearly a year in the making:
My "Gunslinger's Maverick"



*Hand Engraved







*Wood Grips


This would have looked a lot better if I had a steadier hand with a dremel and with a brush. In fact skipping the brush altogether would have helped on the silver touch ups, but the gold turned out well.

It also has a russian roulette mod and PETG barrels. You may see this on ebay sometime soon, it's time to move on to a new project.

[VelveetaAvenger]

Mostly just nicer quality pictures of the blasters I put up a while back.


Added a new barrel to the BBB portion of this gun, used a hair dryer to soften the orange plastic and smacked it in with a rubber hammer. I was able to hit a roughly foot wide tree from about 60-65 feet away more times then not, so I'm pretty happy with this gun now.


I need to put some type of ammo and ram-rod holders on the side here


I'm not sure yet if I'm going to mess with the DS barrels, they're epoxy-puttyed in right now. I really should cut through the epoxy so I can open the blaster up again to reduce some dead space in the BBB and put a spring under the DS trigger so I can fire the barrels independently again.


If anybody else is interested, the paint is regular rustolium hammered metal. It comes in a version for plastic too, but I don't know if it looks the same.


Rebarreled this thing can get a beastly spread with 6 or 9 stefans. It goes way further then I'm used to so I have to concentrate on keeping it level instead of aiming up.



SM750, the barrel might still be a bit too long. I used duct tape to center it in the hole and silicone sealant to connect to the tank. Hits about 70'.

Also, that Maverick on the last page is pretty sweet.

Edited by VelveetaAvenger, 27 June 2009 - 09:42 PM.

[Keith]

Supplementing the Magstrike with some longer range. I just chopped down the Pistol Splat's handle until I got to the catch spring's screw post.



Less awkward than it probably looks. Your thumb rests on the top of the PS's handle. You can easily reach the PS trigger with your first or middle finger, and there's still enough room to rest your fingers on the Magstrike trigger how you usually would.



If you just hold your arm out straight to aim the PS lines up pretty well to sight down the barrel. The barrel wasn't pushed quite all the way into the coupler so it looks a bit crooked.



Not recommended for lefty operation