5162 replies to this topic

[RedHead]

I suppose it's time I show you guys some of my crap...

Blast Bazooka + Singled 3k
The barrel for the Blast Bazooka is 6" of 17/32 brass and 2" of 1/2 brass, all nestled in 1/2 PVC.
As you might have guessed, the 4B has a 1/2 PVC coupler epoxyed to the air tank.
The 3k has a 5 1/2" long barrel made of 17/32 brass.
The pump is plugged on both blasters.
Ranges for the 4B are 90s, 3k is 60ish. (Angled on grass)



Double-Barrel LBB
Both barrels are made of 7" long 17/32 brass, hot glued to a 5" section of 1 1/4' PVC, which is epoxyed to the air tank of the LBB.
Both barrels fire at once, I usually shotgun-load it for a wide spread, last resort weapon. (Anti-rush)
Ranges... 60 feet for 2 darts, high-30s for 4 darts. (Angled on grass)



Music-Playing Nitefinder
It plays "Sweet Home Alabama", Effeminate!
Pretty much the same thing as this: http://nerfhaven.com...LBB plays music
As for mods, the barrel is 4" of 17/32 brass, with an amazing (OMGexplosion) spring I found at Ace. it's rad, except for the fact that the plunger will probably brake in the next few months...




Pool-Noodle Sword
I know, it's not a Nerf gun, but I like it... so I'm showing it to you.
It's about 4 feet long including the handle, and the piping inside is 1/2 PVC.
I epoxyed/hot-glued/E-taped a belt clip I stole off of an old walkie-talkie so I can wear the sword on my belt when I'm not using it. (Like a Jedi!)
It'll fall off when I'm running, but I only plan to run at the enemy, in which case the sword will be in my hand and my primary strapped onto my back.

[wingd man]

Finished some stuff over spring break...

Commander Lock
(because the front reminds me of the sentry from The Matrix Revolutions)



FPS view:


both guns shoot about 50'

Silver Finder
(made for a friend, every time he comes over to pick it up it seems to get screwed up the first time he shoots it)



again, about 50'

Shit trooper blaster
(didn't even shoot at first, now it shoots about 20')

[DflyDen]

Here is the final part of my Spitfire Nerf Long Shot with my Jet Stream Mod. Again, the basic concept is for the Air Stream unit to blast a high speed stream of air into the barrel giving the dart an added boost and fast current of air to ride on. It's still needs so improvement. The end results of the test firing were not spectacular. It needs more work.





You can view the video with test firing on youtube:

Enjoy.

Edited by DflyDen, 07 April 2009 - 03:06 PM.

[Gears]

^^^^^^^^^
(Sexiest LS PJ ever)

And now for my LnL:


If you look a little closely, you can see the green paint already having minor chipping from where the gun comes in contact (when it's rather snug) with my holster. Hunter green to match my Crossbow.

Edited by Gears, 05 April 2009 - 11:39 AM.

[BlackFox]

Ranges were terrible, so don't expect a write-up.

[nerfer63]

[Ice Nine]

In contrast to the one above, please enjoy these shitty pictures of a gun I enjoy:









It is undergoing vast interior improvements to be ready for Chano.

[ice]

Wow, big jump in longshot mods as of late. Well, all I'm doing is adding to the list, so...





















Internal mods are officially done
The paint job is on it's way. I washed the shell inside and out with Dawn and air dried it before priming with "skull white" GW spray paint (gamesworkshop.com). Once I get the paint, it will receive layers of Grey and Black to accommodate the White. I'm leaving for Virginia tomorrow (though I still don't know why... (I'm on spring break this week)) and won't be back to work on it till Friday, so an update on it will hopefully be posted then.

[Icespartan 1114]

Ls made for CQB wars with my freinds.

MODS:
-AR removal
-Nighfinder spring
-Front gun intergration (Will be putting a mag-light in it)
-PVC stock block
-Second O-ring and re-lubed it
-Plugged Bolt hole

Edited by Icespartan_1114, 07 April 2009 - 03:55 PM.

[nat]

Something I did a while ago.

[hereticorp]

Here's a couple preview shots of a commission I'm working on now.

I'll be adding custom stenciling to the list of things I can do to a +Bow and a Longshot in my sales thread. Possibly also the LpL if I can get something small enough to fit on there.





That's all for now folks, the rest is pretty much like my Hereti Corp Assault Rifle but with some updated designs.

And here's the completed comission:

Edited by hereticorp, 10 April 2009 - 04:43 PM.

[Mehku]

My trusty "Classic Combo". They are really due for a barrel mod, but I won't have enough time before Chano to do it. I still have to clean up the new minimizations a little bit, though.





Really, nothing special, but these have been my most reliable guns since forever.

Edit: Just finished this fucker today.

Say hello to my new primary: The M-22 Avenger Assault Rifle. This gun was supposed to be completed in a week or two, but it eventually started to grow into months as I thought of better ideas for it. In all, this gun took about 2 months to complete. I would like to credit my dad for teaching me how to use fiberglass. A coat of paint will come soon, after Chano tomorrow.

Mods done:

AR removal, AR-15 spring addition, new plunger head, fiberglass reinforcement of the bolt sled, minimization, fiber glassing open holes in the shell, lubing the plunger head, reinforcing the handle with a shit load of hot glue and metal rods, padded grip, special gun mount added, jam door removal, bi-pod removal, catch plate spring reinforcement, jammed stock, clip lock removed, and plugging all holes where air would leak out.









Here is the fiber-glassed bolt sled. This reinforcement method is very fucking strong. The bolt sled I'm using now had a crack in it, and after reinforcement, this thing works better than new.



I'm surprised at how accurate this thing is. Yes, accurate. I'm using stock streamlines with the domes filled with hot glue, and these things fly very accurate. I guess I got lucky. The estimated range for this gun is anywhere between 70-85 feet.

Edited by Mehku, 10 April 2009 - 06:45 PM.

[Darken]

My first modded at2k. Had one that my grandparents gave me a long time ago, and saw how popular it was with modding. It turned out pretty well.

[deadshooter711]

Here is my minimized Nf with a speedloader. The coupler is epoxied and glued to the side of the shell to help it a little from coming off.


The barrel isn't crooked downward I just didn't put it in all the way. The E-tape was supposed to help my grip but I ran out.

[Jaymel1989]

The Avenger a.k.a a cpvc'ed nite finder manta

[NerfRogue83]

The RogueScope.
\

Here it is on my cpvc barreled BBBB

[NerfRogue83]

My cpvc barreled NightFinder with RogueScope



Modds:A/R removed, 6" cpvc barrel, Industrial spring, better O-ring on plunger head.

[minsc]

Actually, my first NF Mod. PETG 3/4 in plunger tube replacement, moved forward and lengthened for plunger travel. Floss under o-ring for new better seal, spring replacement, 3 in CPVC barrel.

Ranges: pretty freakin far, as far as my old AT2K with RSCB at 6 pumps. And that's with stock micros. I'm happy with it.

And PETG Plunger tubes are dead secksy.

[jerm78]

Titan quad barrel shotgun with 3K


You can get more info on my blog

[nerfboi]

Here's some thing I jsut finished. I wasn't sure where to post it so I'll post it in both.


This was a perfect mate with CPVC with a lil' sanding on the CPVC part. And the slots were made with a drill and rotary tool.

[Zorns Lemma]

It works, at least indoors. People at ChANO can attest that the cold fucked with it massively. I'll probably semi-drop clip it later.



Internals. Molded a catch well out of putty.



Shell reinforcement, because the first time I put the spring in, the internals ripped themselves off of the walls. (Also, this way I can avoid having to adhere everything to the shell, and thus am able to open it and dick around with internals if needed).



Barrel replacement, with minimal removable of existing structure. It also centers the barrels much better. You might also notice a slight expansion of the rear air-holes.

[bigred1rifleman]

Blue tape to make it war legal.



~F!nnster

Edited by bigred1rifleman, 20 August 2009 - 03:26 PM.

[cheesypiza001]

This is my AT2K Rifle. It has a front loading RSCB barrel that can hold about 6 darts. Its pump is plugged and with a barrel extension can achieve a flat range of approximately 70 feet. It is extremely powerful and quite accurate. To add to the rifle concept of this gun, I drilled holes in the stock and in the front of the AT2K shell in order to be able to clip on a Case-It strap..........And yes....I know........It needs a paintjob.

Some more pictures:




_________________________________________________________

This was my attempt at an AT2K pump/tank in SM750 form.
It originally worked out very well but later on started to develop a few leaks.





______________________________________________________________


This is basically a mini-gun that I built from the remains of a DTG. I used the plunger tube, plunger rod, and the catch. In order to fire this weapon, you simply push up where the catch is. The range is spectacular when its 1.5" plunger stroke is taken into consideration. Its range is about 1.5 times that of a well modified SSPB (35 ft flat).



_______________________________________________________________

In a thread, I once saw someone saying this Air-Bazooka has potential. No offense to them, but I tried it, and it seems that unless you plug up all the little gaps at the points between the reducers, the stefan will not even move 1 inch down the barrel on a full pull/release.


________________________________________________________________

If you have any questions, feel free to PM me.

WOOT.....2,000th Post in this thread.

Edited by cheesypiza001, 13 April 2009 - 08:40 PM.

[Ice Nine]

Lord of the Rings, baby.

On the left is the Uruk-Hai Bow I bought from Split after letting one slip through my fingers on eBay. The other is my LOTRXBow that I used, surprisingly, all the way through Chano with a broken bungee. It's undergoing repairs, including a completely fixed seal and a new aluminum barrel, as well as extra external (or internal) surgical tube banding.

Edited by Ice Nine, 13 April 2009 - 09:14 PM.

[viscouslama]

Here's My little collection:

Copied pictures of Tofu's airtechs from 4 FUCKING YEARS AGO!!!

hey are you willing to sell one of the a2k