Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5161 replies to this topic

#1976 RedHead

RedHead

    Member

  • Members
  • 68 posts
  • Location:Glendora, CA 91741

Posted 31 March 2009 - 11:33 PM

I suppose it's time I show you guys some of my crap...

Blast Bazooka + Singled 3k
The barrel for the Blast Bazooka is 6" of 17/32 brass and 2" of 1/2 brass, all nestled in 1/2 PVC.
As you might have guessed, the 4B has a 1/2 PVC coupler epoxyed to the air tank.
The 3k has a 5 1/2" long barrel made of 17/32 brass.
The pump is plugged on both blasters.
Ranges for the 4B are 90s, 3k is 60ish. (Angled on grass)
Posted Image


Double-Barrel LBB
Both barrels are made of 7" long 17/32 brass, hot glued to a 5" section of 1 1/4' PVC, which is epoxyed to the air tank of the LBB.
Both barrels fire at once, I usually shotgun-load it for a wide spread, last resort weapon. (Anti-rush)
Ranges... 60 feet for 2 darts, high-30s for 4 darts. (Angled on grass)
Posted Image


Music-Playing Nitefinder
It plays "Sweet Home Alabama", Effeminate!
Pretty much the same thing as this: http://nerfhaven.com...LBB plays music
As for mods, the barrel is 4" of 17/32 brass, with an amazing (OMGexplosion) spring I found at Ace. it's rad, except for the fact that the plunger will probably brake in the next few months...
Posted Image
Posted Image


Pool-Noodle Sword
I know, it's not a Nerf gun, but I like it... so I'm showing it to you.
It's about 4 feet long including the handle, and the piping inside is 1/2 PVC.
I epoxyed/hot-glued/E-taped a belt clip I stole off of an old walkie-talkie so I can wear the sword on my belt when I'm not using it. (Like a Jedi!)
It'll fall off when I'm running, but I only plan to run at the enemy, in which case the sword will be in my hand and my primary strapped onto my back.
Posted Image
Posted Image
  • 0
"My affluence makes a nonsense of the regulations!"
-Kaiba with mustache

http://www.escapistm...t-4-Dumb-Part-8

#1977 wingd man

wingd man

    Member

  • Members
  • 514 posts
  • Location:Austin,TX 78751

Posted 02 April 2009 - 08:45 PM

Finished some stuff over spring break...

Commander Lock
(because the front reminds me of the sentry from The Matrix Revolutions)
Posted Image
Posted Image
Posted Image
FPS view:
Posted Image
Posted Image
both guns shoot about 50'

Silver Finder
(made for a friend, every time he comes over to pick it up it seems to get screwed up the first time he shoots it)
Posted Image
Posted Image
Posted Image
again, about 50'

Shit trooper blaster
(didn't even shoot at first, now it shoots about 20')
Posted Image
Posted Image
  • 0

#1978 DflyDen

DflyDen

    Member

  • Members
  • 34 posts
  • Location:Rochester, NY, USA

Posted 05 April 2009 - 06:55 AM

Here is the final part of my Spitfire Nerf Long Shot with my Jet Stream Mod. Again, the basic concept is for the Air Stream unit to blast a high speed stream of air into the barrel giving the dart an added boost and fast current of air to ride on. It's still needs so improvement. The end results of the test firing were not spectacular. It needs more work.

Posted Image

Posted Image

You can view the video with test firing on youtube:

Enjoy.

Edited by DflyDen, 07 April 2009 - 03:06 PM.

  • 0
"The gods that smiled when you were born, are laughing now" - My favorite fortune cookie saying. I really got this.

#1979 Gears

Gears

    The boy who lived

  • Members
  • 848 posts
  • Location:Chicago
  • State:Illinois
  • Country:United States
  • u/GearsLGLF on Reddit

Posted 05 April 2009 - 11:38 AM

^^^^^^^^^
(Sexiest LS PJ ever)

And now for my LnL:
Posted Image

If you look a little closely, you can see the green paint already having minor chipping from where the gun comes in contact (when it's rather snug) with my holster. Hunter green to match my Crossbow.

Edited by Gears, 05 April 2009 - 11:39 AM.

  • 0


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#1980 BlackFox

BlackFox

    Member

  • Members
  • 286 posts
  • Location:Gorst, Washington

Posted 05 April 2009 - 05:03 PM

Posted Image
Posted Image
Posted Image

Ranges were terrible, so don't expect a write-up.
  • 0
"Until we meet in the place where there is no darkness"
-George Orwell, 1984
-----------

Think that piece is beyond repair? Think again!

#1981 nerfer63

nerfer63

    Member

  • Members
  • 386 posts
  • Location:fair oaks, CA

Posted 05 April 2009 - 05:42 PM

Posted Image
Posted Image
  • 0

#1982 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,459 posts
  • Location:West LA
  • State:California
  • Country:United States

Posted 05 April 2009 - 05:48 PM

In contrast to the one above, please enjoy these shitty pictures of a gun I enjoy:

Posted Image

Posted Image

Posted Image

Posted Image

It is undergoing vast interior improvements to be ready for Chano.
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#1983 ice

ice

    Member

  • Members
  • 895 posts

Posted 05 April 2009 - 06:13 PM

Wow, big jump in longshot mods as of late. Well, all I'm doing is adding to the list, so...


Posted Image



Posted Image



Posted Image



Posted Image


Posted Image



Internal mods are officially done :D
The paint job is on it's way. I washed the shell inside and out with Dawn and air dried it before priming with "skull white" GW spray paint (gamesworkshop.com). Once I get the paint, it will receive layers of Grey and Black to accommodate the White. I'm leaving for Virginia tomorrow (though I still don't know why... (I'm on spring break this week)) and won't be back to work on it till Friday, so an update on it will hopefully be posted then.
  • 0
<!--quoteo(post=206428:date=Jan 25 2009, 05:17 PM:name=Mukersman)--><div class='quotetop'>QUOTE(Mukersman @ Jan 25 2009, 05:17 PM) View Post</div><div class='quotemain'><!--quotec-->
Turd stefans. When I pulled these out of the pillow case i was just like, what... the... fuck...
Muker
<!--QuoteEnd--></div><!--QuoteEEnd-->

#1984 Icespartan 1114

Icespartan 1114

    Do NOT buy/sell with me

  • DO NOT TRADE
  • 934 posts
  • Location:Philly, PA 19087

Posted 06 April 2009 - 08:16 PM

Posted Image

Ls made for CQB wars with my freinds.

MODS:
-AR removal
-Nighfinder spring
-Front gun intergration (Will be putting a mag-light in it)
-PVC stock block
-Second O-ring and re-lubed it
-Plugged Bolt hole

Edited by Icespartan_1114, 07 April 2009 - 03:55 PM.

  • 0
QUOTE(Zaxbys @ Mar 2 2009, 02:08 PM) View Post
I won't be there til about 1-2...

Church... gotta soak up that Jesus!


NERFSTRONG #51

#1985 nat

nat

    Member

  • Members
  • 119 posts
  • Location:dubuque iowa

Posted 06 April 2009 - 08:21 PM

Posted Image


Something I did a while ago.
  • 0
If practice makes perfect and nobody is perfect, then why practice.

I pitty you foo! ~MR. T

#1986 hereticorp

hereticorp

    Member

  • Members
  • 621 posts

Posted 07 April 2009 - 05:19 PM

Here's a couple preview shots of a commission I'm working on now.

I'll be adding custom stenciling to the list of things I can do to a +Bow and a Longshot in my sales thread. Possibly also the LpL if I can get something small enough to fit on there.

Posted Image

Posted Image

That's all for now folks, the rest is pretty much like my Hereti Corp Assault Rifle but with some updated designs.

And here's the completed comission:

Posted Image

Posted Image

Edited by hereticorp, 10 April 2009 - 04:43 PM.

  • 0

#1987 Mehku

Mehku

    Member

  • Members
  • 383 posts
  • Location:Milwaukee
  • State:Wisconsin
  • Country:United States

Posted 07 April 2009 - 10:08 PM

My trusty "Classic Combo". They are really due for a barrel mod, but I won't have enough time before Chano to do it. I still have to clean up the new minimizations a little bit, though.

Posted Image

Posted Image

Really, nothing special, but these have been my most reliable guns since forever.

Edit: Just finished this fucker today.

Say hello to my new primary: The M-22 Avenger Assault Rifle. This gun was supposed to be completed in a week or two, but it eventually started to grow into months as I thought of better ideas for it. In all, this gun took about 2 months to complete. I would like to credit my dad for teaching me how to use fiberglass. A coat of paint will come soon, after Chano tomorrow.

Mods done:

AR removal, AR-15 spring addition, new plunger head, fiberglass reinforcement of the bolt sled, minimization, fiber glassing open holes in the shell, lubing the plunger head, reinforcing the handle with a shit load of hot glue and metal rods, padded grip, special gun mount added, jam door removal, bi-pod removal, catch plate spring reinforcement, jammed stock, clip lock removed, and plugging all holes where air would leak out.

Posted Image

Posted Image

Posted Image

Posted Image

Here is the fiber-glassed bolt sled. This reinforcement method is very fucking strong. The bolt sled I'm using now had a crack in it, and after reinforcement, this thing works better than new.

Posted Image

I'm surprised at how accurate this thing is. Yes, accurate. I'm using stock streamlines with the domes filled with hot glue, and these things fly very accurate. I guess I got lucky. The estimated range for this gun is anywhere between 70-85 feet.

Edited by Mehku, 10 April 2009 - 06:45 PM.

  • 0

#1988 Darken

Darken

    Member

  • Members
  • 166 posts
  • Location:San Antonio,TX

Posted 11 April 2009 - 12:40 PM

Posted Image

My first modded at2k. Had one that my grandparents gave me a long time ago, and saw how popular it was with modding. It turned out pretty well.
  • 0

#1989 deadshooter711

deadshooter711

    Member

  • Members
  • 329 posts
  • Location:Morton, PA
  • State:Pennsylvania
  • Country:United States

Posted 11 April 2009 - 06:28 PM

Here is my minimized Nf with a speedloader. The coupler is epoxied and glued to the side of the shell to help it a little from coming off.

Posted Image
The barrel isn't crooked downward I just didn't put it in all the way. The E-tape was supposed to help my grip but I ran out.

Posted Image
  • 0

My Nerf War Pictures

IT'S EVERYWHERE!


#1990 Jaymel1989

Jaymel1989

    Member

  • Members
  • 35 posts
  • Location:Bronx, Newyork

Posted 11 April 2009 - 06:43 PM

The Avenger a.k.a a cpvc'ed nite finder manta

Posted Image
  • 0
QUOTE
~When life hands you lemons. Mod the fuck out of it so it can get 100' flat. also do a apple intergratation to it. it looks nice and adds accuracy~ Jaymel1989



#1991 NerfRogue83

NerfRogue83

    Member

  • Members
  • 646 posts
  • Location:Tampa Florida

Posted 11 April 2009 - 07:18 PM

The RogueScope.
Posted Image\

Here it is on my cpvc barreled BBBB
Posted Image
  • 0
IRC chat: louiec3-- he offered $500 for someone to build a bomb he could send to his ex wife
Rknight-- wow......N9---your dad is in trouble now!


#1992 NerfRogue83

NerfRogue83

    Member

  • Members
  • 646 posts
  • Location:Tampa Florida

Posted 11 April 2009 - 09:28 PM

My cpvc barreled NightFinder with RogueScope
Posted Image
Posted Image

Modds:A/R removed, 6" cpvc barrel, Industrial spring, better O-ring on plunger head.
  • 0
IRC chat: louiec3-- he offered $500 for someone to build a bomb he could send to his ex wife
Rknight-- wow......N9---your dad is in trouble now!


#1993 minsc

minsc

    Member

  • Members
  • 154 posts
  • Location:Columbus, OH

Posted 12 April 2009 - 07:14 PM

Posted Image
Actually, my first NF Mod. PETG 3/4 in plunger tube replacement, moved forward and lengthened for plunger travel. Floss under o-ring for new better seal, spring replacement, 3 in CPVC barrel.

Ranges: pretty freakin far, as far as my old AT2K with RSCB at 6 pumps. And that's with stock micros. I'm happy with it.

And PETG Plunger tubes are dead secksy.
  • 0
QUOTE(Zorn's Lemma @ Jul 25 2010, 12:18 AM) View Post

You'll do a lot better if you spread the lips with the front. Trying to wriggle the back in there first seems a bit counterintuitive.

RSCBow

#1994 jerm78

jerm78

    Member

  • Members
  • 243 posts

Posted 12 April 2009 - 11:52 PM

Titan quad barrel shotgun with 3K

Posted Image
You can get more info on my blog
  • 0

#1995 nerfboi

nerfboi

    Member

  • Members
  • 858 posts
  • Location:Rancho Santa Margarita, California

Posted 13 April 2009 - 12:22 AM

Here's some thing I jsut finished. I wasn't sure where to post it so I'll post it in both.
Posted Image
Posted Image
This was a perfect mate with CPVC with a lil' sanding on the CPVC part. And the slots were made with a drill and rotary tool.
  • 0
We Ride together, we die together, Bad boys for life.

#1996 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts
  • Location:Dulles International Airport
  • State:Virginia
  • Country:United States

Posted 13 April 2009 - 07:07 PM

Posted Image

It works, at least indoors. People at ChANO can attest that the cold fucked with it massively. I'll probably semi-drop clip it later.

Posted Image

Internals. Molded a catch well out of putty.

Posted Image

Shell reinforcement, because the first time I put the spring in, the internals ripped themselves off of the walls. (Also, this way I can avoid having to adhere everything to the shell, and thus am able to open it and dick around with internals if needed).

Posted Image

Barrel replacement, with minimal removable of existing structure. It also centers the barrels much better. You might also notice a slight expansion of the rear air-holes.
  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#1997 bigred1rifleman

bigred1rifleman

    Member

  • Members
  • 414 posts
  • Location:Kalahmok, Mikhagin

Posted 13 April 2009 - 08:26 PM

Blue tape to make it war legal.

Posted Image

~F!nnster

Edited by bigred1rifleman, 20 August 2009 - 03:26 PM.

  • 0

#1998 cheesypiza001

cheesypiza001

    Member

  • Members
  • 752 posts
  • Location:Connecticut

Posted 13 April 2009 - 08:38 PM

Posted Image

This is my AT2K Rifle. It has a front loading RSCB barrel that can hold about 6 darts. Its pump is plugged and with a barrel extension can achieve a flat range of approximately 70 feet. It is extremely powerful and quite accurate. To add to the rifle concept of this gun, I drilled holes in the stock and in the front of the AT2K shell in order to be able to clip on a Case-It strap..........And yes....I know........It needs a paintjob.

Some more pictures:

Posted Image

Posted Image
_________________________________________________________

This was my attempt at an AT2K pump/tank in SM750 form.
It originally worked out very well but later on started to develop a few leaks.

Posted Image

Posted Image

______________________________________________________________


This is basically a mini-gun that I built from the remains of a DTG. I used the plunger tube, plunger rod, and the catch. In order to fire this weapon, you simply push up where the catch is. The range is spectacular when its 1.5" plunger stroke is taken into consideration. Its range is about 1.5 times that of a well modified SSPB (35 ft flat).

Posted Image

_______________________________________________________________

In a thread, I once saw someone saying this Air-Bazooka has potential. No offense to them, but I tried it, and it seems that unless you plug up all the little gaps at the points between the reducers, the stefan will not even move 1 inch down the barrel on a full pull/release.

Posted Image
________________________________________________________________

If you have any questions, feel free to PM me.

WOOT.....2,000th Post in this thread.

Edited by cheesypiza001, 13 April 2009 - 08:40 PM.

  • 0

#1999 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,459 posts
  • Location:West LA
  • State:California
  • Country:United States

Posted 13 April 2009 - 09:00 PM

Posted Image

Lord of the Rings, baby.

On the left is the Uruk-Hai Bow I bought from Split after letting one slip through my fingers on eBay. The other is my LOTRXBow that I used, surprisingly, all the way through Chano with a broken bungee. It's undergoing repairs, including a completely fixed seal and a new aluminum barrel, as well as extra external (or internal) surgical tube banding.

Edited by Ice Nine, 13 April 2009 - 09:14 PM.

  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#2000 viscouslama

viscouslama

    Member

  • Banned
  • 13 posts
  • Location:florida

Posted 14 April 2009 - 08:28 PM

Here's My little collection:

Copied pictures of Tofu's airtechs from 4 FUCKING YEARS AGO!!!

hey are you willing to sell one of the a2k
remember its nerf or nothing (well there are other things but ....you know what i mean)


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users