Modification and Paintjob Pictures
Posted 17 March 2009 - 11:47 AM
New red bbb with inlineclip
Edited by hopper055., 28 March 2009 - 12:28 PM.
Posted 18 March 2009 - 11:22 AM
Both have AR removals, spring additions and fresh new bungies. I don't know which one's actually better yet because I've just been firing suction cup micros at my window. I actually am liking the Switch Shot better overall though.
If anyone has any ideas how to integrate them together (NOT the "Manta" way with the handles attached), please PM me.
Edited by Glint, 18 March 2009 - 11:22 AM.
This has spiraled beyond uselessness into utterly stupidy.
Read it again until you figure it out.
Posted 18 March 2009 - 12:03 PM
(It's basically the shotgun mod between a cross of my 3rd and 4th BBB) (I'll more then likely end up with a 5th BBB for that war on 3/28)
Edited by b00m13, 18 March 2009 - 12:08 PM.
Posted 18 March 2009 - 04:45 PM
Sorry for the blurry pictures, I was shaking the camera too much.
He has 3 ammo holders on one side and 1 on the other where his hand is. I thought this was good enough to post because I didn't see anything else like this and he placed them in a well position that doesn't interfere at all with you hands or storage of the gun. He didn't mod the guns at all except for AR though.
Edited by deadshooter711, 18 March 2009 - 04:46 PM.
Posted 18 March 2009 - 10:44 PM
he gave it a pretty shitty gold and black paint job, but I just really didn't care enough to paint it again, so I just wrote something on the sides
Some breeches I just finished, write ups will be made if anyone so demands it...
yeah I'm that guy who made that cool thing with the cool paint.
Posted 19 March 2009 - 02:25 AM
Posted 19 March 2009 - 03:12 PM
By tailschaser, shot with DSC-P92 at 2009-03-19
I straw modded the inside with a sam's club cafe straw, the three-prong ar (modified) and hot glue. The stock has the ace spring (NF spring) hot glued in place with the new recon's black cover holding its tension on the plunger.
For speed, take the stock and for range, put it back on.
By tailschaser, shot with DSC-P92 at 2009-03-19
"Itís only after youíve made the mistake and taken the wrong path, do you see all the other options that were before you."
Posted 19 March 2009 - 07:48 PM
Mustang6 with hotglue behind the spring to compress more
NF streched spring with laser pointer sight added on (Spring was streched a little too far so it does some hurtin!)
(Thanks for the help with the pics draconis!)
Edited by Gazoo, 20 March 2009 - 09:52 AM.
Posted 19 March 2009 - 10:27 PM
My BBBB I just finished. It;s loaded by opening the vavle, loading in 7 darts, then closing the valve and loading 6 more. All of this is done from the back of the gun. After I fire the first 7 I open the vavle and let the next darts fall in. The tee is a 1/2X1/2/3/4. With a 9/16 barrel goop in the front.
The back looks crooked, but it's not.
Posted 19 March 2009 - 11:45 PM
AT2k, plugged pump, PETG barrels.
Posted 20 March 2009 - 03:51 PM
Edit: Shit, thought the bandwidth limit thing was over, sorry guys, the pics will be up later this month. If an admin wants to delete this post, feel free.
Edited by TantumBull, 20 March 2009 - 03:52 PM.
Posted 20 March 2009 - 08:52 PM
Old Captain Bojangles McPoonsnatch:
Sexy, new Captain Bojangles McPoonsnatch
And ubersexy black light illuminated Captain Bojangles McPoonsnatch
She's shown here alongside what has arguably been the biggest source of inspiration for my projects.
Since we've started playing in the laser tag arena, paint jobs in Cincinnati have begun to change quite a bit.
Posted 22 March 2009 - 02:05 PM
Edited by bobbybilly60, 22 March 2009 - 02:09 PM.
Posted 26 March 2009 - 05:57 PM
Posted 26 March 2009 - 06:59 PM
AT3K, thinwall PETG barrels.
I like it.
Posted 27 March 2009 - 04:12 AM
The mods to each gun are as follows. Nitefinder is a simple AR removal and crayola barrel with SSPB integration. The SSPB is an AR removal and barrel mod. There's a ring of ground down CPVC inside the barrel giving it a slightly better seal. The Switch Shot has had AR removal, rebarreled with CPVC, and added a mav spring for more kick. new trigger mech too, using a string run to a ring next to the BBB trigger allowing me to fire either without moving my hands.
The BBB has been rebarrelled with CPVC and a breech loader added. The barrel has a little chunk of the original barrel as an endcap allowing it to still fire arrows. lastly I've added a rifle sling for quick switching to a side arm should I need more than 4 shots.
It's my best work to date and my only complete paint job. It was quite labor intensive since most of it had to be done by hand.
Posted 27 March 2009 - 10:57 PM
CPVC Couplered NightFinder
The BBBB with a surprise. It looks virginly stock:
My latest mod, I put it last for some reason, but, here it is-
T.W.E.R.P. (Turreted Weapon Eliminating Running People)
Here's the stock-
I did an altered version of Ice's mod- the keyring. After drilling the hole, I looped the looped wire through and threaded the wire again through itself. That'll last longer than the Goop, even if that is strong.
First Person View-
The side you might not want to see.
Man, this needs a paint job. To Wal Mart!
Are these picture too big? Or is my monitor small?
Edited by RVMVTVProductions, 28 March 2009 - 11:04 PM.
Posted 30 March 2009 - 08:54 PM
it's was my first ORIGINAL post so I didn't know weather to post here or there.Anyways off with my ranting...
I'd like to see everyones faces when I walk up with something so big...
Posted 30 March 2009 - 11:01 PM
Pistol Splat with breech.
Newest PAS (#10)
CPVC coupler inside brown funnel, cut up a ball for plungerhead padding, zero dead space.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users