Modification and Paintjob Pictures
Posted 28 January 2009 - 10:25 PM
Posted 28 January 2009 - 11:25 PM
Nerf Hornet AS-6: black, gray, & gold.
I drilled out part of the air restrictors and removed the barrel pegs, getting a few extra feet (it gets around 35' now.) I'm probably going to sell it and get a double shot as a replacement, then use my blowgun and double shot as my gun combo.
-Han Solo; Star Wars: A New Hope (IV)
Posted 29 January 2009 - 04:09 AM
And the current project.
Posted 29 January 2009 - 08:42 PM
Huh, it looks like I only have two SM1.5k's. But I can assure you there's a second one behind the bottom one.
Edited by Galaxy613, 29 January 2009 - 08:43 PM.
Posted 29 January 2009 - 10:15 PM
I know I'm a little late, but I had to repaint some parts.
Red and blue paintjob with silver stars.
Close up of the stars.
I'm not a great painter, and I'm proud on how the handle area came out.
Special thanks to Blacksunshine for answering my question on getting the stars to stay and not peel.
Posted 30 January 2009 - 06:09 PM
I ended up with a reactor with some balls for 25 cents. I mainly wanted the balls...
Posted 31 January 2009 - 06:25 PM
Along with a lot of converted Micro darts that fit especially into it's barrel:
This has spiraled beyond uselessness into utterly stupidy.
Read it again until you figure it out.
Posted 31 January 2009 - 07:36 PM
Sanded down that little nub too.
This thing melts in my hand.
Edited by nerfer9, 31 January 2009 - 07:55 PM.
Posted 31 January 2009 - 09:35 PM
I didn't paint the plunger tube, expecting it to get in the way of performance. To get it to not chip would take a few layers of paint and and few more layers of sealer/clear coat. With the added thickness of all that I figured it would cause unnecessary friction on the shell of the gun. I could be wrong, but didn't really want to chance it.
Posted 01 February 2009 - 04:56 PM
My current primary; a BBB (old purple version). It took about 4 hours to do (with drying time). I plugged the arrow holder holes with epoxy putty as opposed to cutting them off.
I personally think it could use some more red on the front handle.
My NF, there's a little wear on the handle from my decision to wear rings while nerfing.
and an Effeminate shot (with bands).
Just to note; this one HAD a blue LED in it, then became finicky and stopped working...
My second favorite MAV (that works).
The sticker says: "CAUTION do not stick finger into the center of this device"
it looks a little worse-for-wear because I painted it during the summer and it has been used since then.
Posted 02 February 2009 - 07:54 PM
Posted 03 February 2009 - 05:18 PM
If at first you don't succeed, add more epoxy.
Posted 03 February 2009 - 05:51 PM
This is NOT steampunk (tho when I auction it I will keyword it as such since people love the term)
Posted 04 February 2009 - 10:30 AM
Edited by jerm78, 04 February 2009 - 10:19 PM.
Posted 04 February 2009 - 10:39 AM
It has lights, sounds, laser pointer in scope and recoil on the trigger pulls. Check my blog for details
Edited by jerm78, 04 February 2009 - 11:44 AM.
Posted 04 February 2009 - 11:13 AM
My new gun... Not totally finished. I still have to add a keyring to the tank and make a cover for the hosing and tank out of pvc. Here it is now though. I call it MONSTER.
It uses an at2k shell, sm3k pump, super soaker pump handle, and a titan air tank. Just stuff I had laying around that my friend was curious as to why I hadn't done anything with. He told me to create a monster. In one of the pictures it shows a piece of a crayola around part of the hose. That was because the littleb screw on cap for the hose on the sm3k pump was cracked so I just used that to make it sturdier.
really sorry about the size... Fixing it now.
Edited by Kid Flash, 04 February 2009 - 11:18 AM.
Posted 04 February 2009 - 07:51 PM
DTB - Minimized, ARs removed, straw mod, simple paintjob.
Crossfire - Minimized, AR removed, crayola barrel replacement, spring replacement, sliding bar replacement, simple paintjob.
Lock N' Load - Minimized, barrel post removed, crayola barrel (nested in SCH40 PVC) replacement, banded, Chainblazer spring replacement, FBR silencing.
Chimera Variant - (Long gone)
Edited by cheesypiza001, 04 February 2009 - 07:54 PM.
Posted 07 February 2009 - 11:22 PM
On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.
Posted 09 February 2009 - 07:12 PM
I call her Alice
My first "major" external modification
Brought to you by
Edited by TheDisciple, 09 February 2009 - 07:15 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users