5162 replies to this topic

[Coop]

My Big Blast scatter gun. 6 CPVC barrels that fire like a shotgun. 40-50' ranges flat. The paint job was based on COD4's red tiger pattern. I'm happy with this CQB shotgun!

[Wes7143]

silentsnipe, on Nov 2 2008, 07:35 PM, said:

Fuck man, I'm running out of underwear, another good paintjob.

What part of PICS ONLY don't you understand? And don't quote the whole fucking post!

Anyway... Something productive:

AT2K with 5 shot inline clip and paint.

[Blasphemy]

My Commlink II:

I removed most of the stickers (used "CQC Electrical Grade Contact Cleaner" highly recommended, doesn't leave a residue like Goo Gone or Goof Off), nested a copper coupler at the base of the barrel for convenience in barrel selection and loading, added a Firefly spring and cut down Tek 10 spring in addition to the stock spring, inverted the plunger head for a better seal, trimmed walls to move plunger tube forward and increase plunger stroke (deadumpster's mod), re-lubed the plunger, added 1/4" polycarbonate reinforcements to the spring compression walls, removed the radio, and did a screw replacement for easier maintenance.

Overall, this sucker is deadly accurate, gets around 75' ranges normally, and VERY respectable 100' ranges consistently with two mini-bungees and a 9" barrel and has some good room which I may integrate something into to boot. Overall I am very pleased with the results and I can attest to deaddumpster's ranges, this blaster can be surprisingly powerful. I've got three more of these to get to modding which I all got for free (Woohoo Freecycle!). I highly recommend them if you can get past the nightmare of the triangle screws.

Edited by Blasphemy, 04 November 2008 - 03:25 PM.

[keef]

CPVC turret, marvelous salvo slopped on. Top tank leaks, pretty annoying. Going to try a fix I thought of soon.

[Echnalaid]

BBBR- Big Bad Bow Rifle

PVC shoulder stock where the sight used to be.

1/2' PVC coupler, nested PETG

Minimized, the top hump thing is cut off.

Edited by Echnalaid, 05 November 2008 - 10:26 PM.

[Connor]

So I know that eveyone shows the there night-finder and there no fun anymore!!

But I think that you guys will like mine!!!!

Mods done to night-finder
-----------------------------
- New 1/2 in. Cpvc barrel
- Added o-rings
- Has a night-finder spring and a cross-fire spring
- Painted Black with orange high-lights
- Made a fire fly barrel with 1/2 in. Cpvc cuplers ( so it has a hand moved turret )
- Also i added grip tape for FUN!!
----------------------------------------------------------------------------------------------

Heres the pictures of the night-finder!!

[/img]

[/img]

[/img]

Thanks!!!

[Forsaken angel24]

For Rambo.


For the Cardiac Kid.

[jerm78]

[cheesypiza001]

My Tech Target:





Mods:

AR removed

Crayola barrel

Added Nite Finder spring

Added O-ring

Replaced catch spring

Custom dremmeled iron sights

Trimmed eye of plunger rod handle

Banded

Minimization

Paint job

[s3an967]

My LBB


Half inch pvc couplers.


PETG barrel with some PVC on it.


It's hitting about 90 feet flat with a CDTD and at 70 feet it's dead accurate. It gets 105 feet angled. It can pierce cardboard at 10 feet.

[

Edited by s3an967, 09 November 2008 - 02:14 PM.

[Connor]

Ok I will be showing you my Long-shot

Mods done to the long-shot
-------------------------------

- ARs taken out
- All 1/2 Cpvc
- Singled shot
- nice red and black paint job
- Cpvc in the stock so it dose not fall in
- Long-shot spring, Night finder spring, and recon spring
- I will be in. a at2k into it ( I will post pics of when im done )
---------------------------------------------------------------------

Heres the pics




Thanks

Edited by Connor, 09 November 2008 - 12:32 PM.

[jerm78]

Edited by jerm78, 10 November 2008 - 01:16 AM.

[TimmyTown]

Holy shit jerm, you are the master of turrets!

Seriously, thats incredible stuff.


Right onto my picture!



Name: LIC (Lols I'm a Crossbow)
Range: Gets about 80-90

It is essentially a double NF inside of an ExpandaBlast shell. The stock is completely removable for a mega pistol feel.

The gun was made cutting up 2 NFs for plunger tubes and putting them inside of the expandablast plunger tube. It all fit pretty nicely. Then because I can't create a plunger rod worth shit I cut up a Commlink for it's massive plunger rod and stuck that inside of there.

It is prone to misfires occasionally, but if cocked correctly (with a slight upward inflection at the end of the stroke) it should be fine.

It would have a shitton more power, but due to the design of the expandablast shell springs only have about an inch of room when fully compressed. Right now I have a BBB and some other spring in there.

I think it looks rather like a crossbow myself in all honesty, and I own/owned one for god sakes! Too bad I can't find it anywhere....

[rokor]

First time Ive managed to get of my ass and get some pictures up.
http://s184.photobuc...eorVideo005.jpg
(from left to right then bottom) My LSed NiteFinder, I plan to have a paintjob similar to this shell on the previous NF, and then my Russian douche bag modded Maxshot(the things a beast).

I just cant seem to get this picture thing to work, youl just have to click the link.

Edited by rokor, 10 November 2008 - 05:27 PM.

[Blacksunshine]

I guess it was my turn to make one.
Still have to seat the barrels. but its for the most part done.
went with a triple spring combo here.
Stock, LS and BBB (that one was a bitch to get on there)
Building it was significantly easier then I had expected. Thanks FA for the clean write up and clear pics.






I will repost when its also had its paintjob.

Edited by Blacksunshine, 10 November 2008 - 06:34 PM.

[Kid Flash]

WARNING: HORIBLE QUALITY PHOTOS AHEAD!!!

Red one which was cpvced but was hollowed out with a .5 inch drillbit:



Blue one which was crayola'd (I have 2 of these):



Group Photo!!!!!!:

Edited by Kid Flash, 10 November 2008 - 09:47 PM.

[TimmyTown]

TimmyTown, on Nov 10 2008, 01:22 PM, said:

Name: LIC (Lols I'm a Crossbow)
Range: Gets about 80-90

So today I made some more improvements to the LIC. The major issue with this gun was the misfires. Due to finding the Expandablast in the trash it was pretty damn beat up. As you will see in the below pictures the plunger rod guiding part of the shell was completely gone. The damn thing would misfire if it was shaken OR stirred.

So basically I just fixed the trigger catch by sculpting a piece of plastic to fit the rod. Attached VERY messily (because I was in a hurry and 5 minutes to wait for epoxy is FAR too long)



Prevents all misfires and can be kept primed for quite a while.

I am pretty happy with this thing, using nothing but broken guns I have created a decent loaner weapon that gets 80-90 feet consistently.

And it looks like a crossbow, a much uglier blueier crossbow albeit.

[Heartbreak 1]

This is My Recon that I've been having bolt issues with. I might buy one off of a fried on this site soon! =]




She's almost done!

[Blacksunshine]

Ok. So doomsayer got put on the backburner so I could do some commission work for Longshot wielder.
No super paint jobs just modded guns. So this is what had me up till 4am last night.

The arsenal


AT2k-
PETG turret, pump plugged



Disk SHot- Petg barrel, Added 2nd Oring and lube, REplaceed plunger head screw with longer screw and washer, added extra spring.



Lightning Blitz- Pump plugged, Petg barrels.


AT3K - petg barrel, Pump plugged.


Megamissle-
PVC coupler modded. pump plugged. PETG nested in PVC.

[TimmyTown]

I finished my Bloody Bad Bow today, and once I work out some kinks I shall name it something fantastic, probably in latin.

Now, onto shitty cellphone pictures! (If only my father would find my damn camera cable that HE lost)





Read more and comment here: http://nerfhaven.com...t=0#entry183321

[Gas Mask Guy]

That's a Vulcan running on a 18V drill battery, with a horribly arranged flashlight and an actual metal ammo case on the bottom. Definitely WIP, but also functional. When it fires, it fires at least twice as fast. SCIENCE!

[Ubermensch]

SM1.5k integrated into the front of an AT20. Eventually, the experimental mod failed, but I thought some people might get some ideas.


NOTE: If anyone has questions about supercharging an AT20, PM me. I've got TONS of tips.

[sputnik]

Another sexy PAS.




New coupler system.







I'll explain it if y'all show enough interest.

[Icespartan 1114]

There like brothers.
The 2k is Singled with PETG, the 3k is PETG turret modded, and finally the 4k is PETG turret modded.

My primary at the moment.

Slug made this Rev2. plus bow. I love this thing to death.

And my secondaries at the moment.

The one with the PVC coming out of the gun has PETG nested inside of it with its AR's removed, E-taped the piece that is on the top of the plunger head, double o-ring, lubricated it, silenced and added PETG dart holders. The other one is the same except it ha a scout and diskshot spring inside of it.

Edited by Icespartan_1114, 14 November 2008 - 09:38 PM.

[ice]

Doomsayer




I made a rather strange turret assembly for it, gluing the gears together so it didn't slip, but not using the inner yellow piece. I found it was unneeded for CPVC, and I simply dremeled larger wholes in the back of the turret to keep the barrels still in the back, while the out yellow pieces ridges keep it straight in the front. I need to sand it down for some barrels, but the barrels that are making a good seal are hitting around 100' flat.

I sanded the turret down friday, and added an o-ring to the plunger tube, giving this monster an air tight seal on every barrel. Ranges are consistently 100 flat.

Edited by ice, 15 November 2008 - 08:58 AM.