Modification and Paintjob Pictures
#1076
Posted 27 December 2007 - 11:57 PM
I used PVC, putty epoxy, parts from my old erector set, and one of my minimized couplered NFs.
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad
#1077
Posted 28 December 2007 - 12:20 AM
Edited by bobafan, 28 December 2007 - 12:58 AM.
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad
#1078
Posted 30 December 2007 - 03:40 PM
Name:
I haven't picked on yet
Ranges:
About 65'
Comments:
I hot glued some Plexyglass on the the front where the hole was.
Edited by Dayko, 30 December 2007 - 03:41 PM.
< One foot in death...The other in life. >
#1080
Posted 01 January 2008 - 05:03 PM
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad
#1081
Posted 02 January 2008 - 07:52 PM
There's my entire arsenal (minus my sm3k, 2K and 2 shitty NF's (my first mods))
All are modded except my LS
Yes those are baloons that I used for bands. Just pick up some of those balloon animal balloons (dollar tree), make chain of two, and put it on your NF!
I used 2. Also the balloons came with a hand pump I could use
for a new pump or something all for 1 dollar
Excuse teh sukc picture
Edited by xNFx 37, 02 January 2008 - 07:53 PM.
-Chief
#1082
Posted 03 January 2008 - 09:29 PM
For some reason it always seems to weasel it's way into my games of ping pong... I'm going to do some more stuff to it, I'm also trying to find some motors to hook up to the wheel (they have to be good enough to rev it up all the way, but at the same time be a reasonable size). I'll show you guys when it's finished.
Edited by penguin807, 03 January 2008 - 09:30 PM.
#1083
Posted 04 January 2008 - 04:16 PM
BBB
LBB
It's like saying that your bottled water has a secret ingredient! Well yes, water!
#1084
Posted 05 January 2008 - 12:10 PM
Edited by CaptainSlug, 05 January 2008 - 12:10 PM.
#1085
Posted 06 January 2008 - 01:00 AM
#1086
Posted 06 January 2008 - 01:31 AM
#1087
Posted 06 January 2008 - 01:56 AM
Blaffair to Rememblack.
#1088
Posted 06 January 2008 - 07:56 PM
Inside
This guy can see the future!
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
#1089 Guest_CornMan_*
Posted 06 January 2008 - 08:20 PM
#1090
Posted 06 January 2008 - 10:01 PM
This guy can see the future!
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
#1091
Posted 07 January 2008 - 01:58 AM
My tech target
http://i273.photobuc...n/Picture10.jpg
My DTG
http://i273.photobuc...en/Picture9.jpg
My LBB
http://i273.photobuc...en/Picture6.jpg
My BBB
http://i273.photobuc...en/Picture5.jpg
My Double DS
http://i273.photobuc...en/Picture3.jpg
My LS
http://i273.photobuc...en/Picture1.jpg
My NF
Edited by ejrasmussen, 07 January 2008 - 10:02 PM.
#1092
Posted 07 January 2008 - 11:08 AM
#1093
Posted 07 January 2008 - 09:31 PM
#1094
Posted 07 January 2008 - 10:11 PM
Nope, only one works for me and thats the one that looks like a Carbine LS with an intergrated Mav. If it is that, it looks really cool. Good job. Fix the rest of the images...
Sorry dude but its only the cocking mech for the ls frontgun...
#1095 Guest_CornMan_*
Posted 07 January 2008 - 11:08 PM
#1096
Posted 07 January 2008 - 11:12 PM
Hey, instead of posting links, (which is fairly annoying), try posting the IMG code onto your post to have a picture right on the page. Just a bit of advice.
I did that and it didnt work. It was probably my fault.
#1097
Posted 08 January 2008 - 09:23 AM
Everyone, This is Jules (Winfield.)
My hand cannon
I'll be painting "Bad Mother F*cker" here. If you've seen Pulp Fiction, then you understand.
That's no trick of the camera flash. Yes, I painted the gun hot pink.
I post these with the warning/suggestion to others though; be very careful when painting your Recon. The tolerances on the various pieces that fit together (the base of the stock that clips to the back of the pistol, and the cocking mechanism especially) are apparently close enough that even a single layer of protective felt can make it difficult to work the moving pieces. I glued thin strips of felt on the inside of the cocking mechanism so it wouldn't scratch the paint on the body of the gun. Even after leaving the screws that hold the cocking mech' a few turns loose, I still couldn't cock the thing. As a result, I had to remove the felt strips.
The paint has had days to dry, but here's the result of the blaster being cocked and fired 3 times.
I'm giving serious consideration to dumping the entire shell in acetone and trying it again with vinyl dye.
P.S. 3 coats of paint, in case someone asks.
Edited by Twitch, 08 January 2008 - 09:26 AM.
~bpso86
~JediJoe9
#1098
Posted 08 January 2008 - 06:42 PM
*twitch.*
...and ideas are bulletproof. "
#1099
Posted 08 January 2008 - 06:54 PM
Got Nerd?
#1100
Posted 08 January 2008 - 08:18 PM
I'm selling this Longshot on Ebay when I'm done with it. Its singled, painted, and has a "silencer" on it. The paint is flat black, silver specks, and a tint of bronze with a double layer of Matte finish. I'm looking for someone to buy it for around 80 hopefully... PM me if wanted.
15 user(s) are reading this topic
0 members, 15 guests, 0 anonymous users