Edited by nerfer75, 05 April 2008 - 11:02 AM.
Modification and Paintjob Pictures
#851
Posted 18 September 2007 - 05:56 PM
And whosoever was not found written in the book of life was cast into the lake of fire.--Revelation 20:15
#852
Posted 18 September 2007 - 06:29 PM
#853
Posted 18 September 2007 - 06:37 PM
#854
Posted 18 September 2007 - 06:40 PM
This was my 1st and only NF. The fact that's it's still in mostly one piece is nothing short of a miracle since I've taken it apart and re-assembled it ... over 10 times.
I've breeched it only for the looks because my friend requested it. It does not have a good seal because I don't have the proper tubes so it doesn't really work.... but luckily for me, my friend didn't ask for a "working" clipped NF.
Please b00m13! Make a write-up. I really want to know how to make a clippable nitefinder.
#855
Posted 19 September 2007 - 12:31 AM
Kid Flash, I'm sorry, but I refuse to sell you a defective NF, but all is not lost. I wrote a guide for anyone that wants to do this mod (the proper way), look for thread "Clipped NF Mod".
Edited by b00m13, 19 September 2007 - 12:31 AM.
#856
Posted 19 September 2007 - 04:35 PM
Edited by nerfer75, 05 April 2008 - 11:01 AM.
And whosoever was not found written in the book of life was cast into the lake of fire.--Revelation 20:15
#857
Posted 19 September 2007 - 05:29 PM
#858
Posted 19 September 2007 - 05:51 PM
The way it's shaped, it could almost pass off as a Star Trek phaser.
Believe it or not, that was the inspiration for it.
And whosoever was not found written in the book of life was cast into the lake of fire.--Revelation 20:15
#859 Guest_yourface_*
Posted 20 September 2007 - 11:58 AM
#860
Posted 20 September 2007 - 03:06 PM
What are the ranges? You could probably squeeze 60' out of it with a nested brass barrel.
50'-60', once hit 65'.
And whosoever was not found written in the book of life was cast into the lake of fire.--Revelation 20:15
#861
Posted 20 September 2007 - 09:05 PM
Not sure how often it's been done, but I wanted to try a white gun for a change. If I can, though, I want to sand/grind off the Nerf logos and warnings. The PVC mess to the side is purely cosmetic.
As far as modifications go, it's pretty basic. Air restricters have been removed, and the obvious addition of the Crayola barrel. My further plans include lubricating the plunger (my attempt with WD-40 just made it smell funny), the addition of another o ring, and maybe figuring out some internal banding.
#862
Posted 20 September 2007 - 09:16 PM
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
#863
Posted 20 September 2007 - 10:21 PM
I know chemically it does eat it, but it doesn't seem to have affected mine yet.
#864
Posted 20 September 2007 - 10:53 PM
#865
Posted 23 September 2007 - 01:17 AM
bought the stock Splitfire off a friend for about 10 bucks.
Blaffair to Rememblack.
#866
Posted 23 September 2007 - 04:59 PM
And here are the internals.
And as you might have noticed but I put a coupler in the gun wrapped in e-tape so the barrel dosn't wobble.
And here is my two First Shots.
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
My TTG mod.
#867
Posted 23 September 2007 - 06:01 PM
My one nice looking mav. A nice flat painjob. Every other one I did was really glossy
like the one below
(the one on the bottom is so glossy it looks flaky under light. It hurts eyes)
My Magstrike. Nothin special. ARs removed
sorry for the big pics. My computer completely fucktarbulus right now.
Edited by BustaNinja, 23 September 2007 - 06:06 PM.
Venom: Haven't we all?
#868
Posted 23 September 2007 - 08:02 PM
#869
Posted 23 September 2007 - 09:04 PM
With the Sharp Shooter 1 I get about 30ft with tagers and 52ft with stefens. The ranges currently suck because I haven't put a new spring in it.hierarchy, those are pretty neat. What kind of ranges are you getting with each?
With the First Shots I get about 15ft with tagers and about 28ft with steffens. And again the ranges suck, this time because the seal is broken on them.
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
My TTG mod.
#870
Posted 23 September 2007 - 09:26 PM
Edited by Zaxbys, 23 September 2007 - 09:28 PM.
"Bitces be crazy"
QUOTE
"Hey girl... you like water sports?"
~Groove 6/26/09
#871
Posted 24 September 2007 - 11:19 PM
Props to the Reactor modder. Poor thing needs some love.
I like the way the Disk Shot gun looks. That big ol' ammo storage in front is just SCREMING "integrate something!" or "clip me!"
Started with an integration: Disk Shot + SSPB. Y'all can take your AT2Ks and shove 'em wherever you want inside guns; I'll take SSPBs
Brass coupler'd barrel on the Disk shot gun, CPVC barrel on the SSPB. NF spring in Disk shot. Shoots 58' average. SSPB gets 40' average.
I also made a duct tape holster. There's a little velcro dot on the top that fastens it in so it AIN'T gonna fall out, but also allows me to effortlessly draw it.
#872
Posted 24 September 2007 - 11:28 PM
Here are my most recent guns.
-Dr. Suess
#873
Posted 26 September 2007 - 12:04 AM
I totally forgot the name of this gun all I know is that its a Lanard, Goes about 160 feet I haven't calculated.
Blaffair to Rememblack.
#874
Posted 26 September 2007 - 04:03 PM
"Which road do I take?" she asked.
"Where do you want to go?" responded the Cheshire cat.
"I don't know," Alice answered.
"Then," said the cat, "it doesn't matter."
#875
Posted 26 September 2007 - 10:21 PM
Blaffair to Rememblack.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users