5162 replies to this topic

[Funky Mutha Facko]

What a frigin coincidence, look what we just made.


PAS ball shootin attachment. N-Strike stock attachment point with clear raider stock.


Titan-Mav with shotgun rscb.

[Bryneverostasia]

My personal take on a motor swapped Stryfe Roughcut masterkey.

[Coop]

I don’t often upload multiple images of the same blaster here, but I think it’s appropriate because each angle shows a new level of awesome with this blaster

I call it The Stryfly. It’s a Stryfe with a Firefly stock in the back and a detachable Retaliator barrel with a Rough Cut attached to it. There are numerous internal modifications, but I won’t waste space here in the picture thread.







There are four LEDs mounted in the Firefly shell pointing downward, directly into the Stryfe shell. It’s difficult to capture the LED lighting in a photograph, but it’s very cool in person.


Yes, the front is detachable. There are two different circuits and switches for the LEDs to make this happen.


http://www.youtube.com/watch?v=ow5PByp55Ok


This was made just for the LOL's. I am well aware I made a nice, compact blaster incredibly bulky and funny looking. But I still like it!

Edited by Coop, 22 January 2013 - 01:41 AM.

[XproXglassX]

Ho-ly shit!
Edit. I didn't mean to post this. When I clicked the picture It didn't say it was the pictures thread. Delete this post.

USER WAS WARNED FOR THIS POST

"Ho-ly shit!" does not qualify as a value-adding post in any other thread either.

Edited by Zorn's Lemma, 18 January 2013 - 02:43 PM.

[Agent Jonny B]

My updated Longshot, now with foam chainsaw bayonet:




My Stryfe:

[NerfMonkey]

This one's not real impressive but it's the first mod I've done in ~2 years and it came out much cleaner than I expected. 17/32" brassed NF.

[HOTH]

Worked on a Rayven. Mods done:

--Replaced the AA's (1.5 volts each x4) with a 9v battery harness
--Toggle on/off switch added, replacing the rev up switch
--All resistors removed (9v direct to the motors, wired in parallel)



---



--



--



--



Quick demo:

http://s682.beta.photobucket.com/user/Charlietidmarsh96/media/Movieon1-20-13at301AM_zpsf7753dc8.mp4.html

Edited by HOTH, 20 January 2013 - 06:48 AM.

[BuffNerd]

Standerd AT3k mods with wonderful barrel spacers made by NoM

[andtheherois]

Look I actually got something done. Tested it and it shoots hard, so it'll be going into a secret project.

[Nerfomania]

SMG Stampede

Internal mods:
-OMW upgrade spring (works excellent)
-4 trustfires ~16.4 volts
-'SMG' Style cutdown.
-Styrene covering all the various holes
-AR removal
-removed all the locks minus the clip lock

Exterior:
-3 coats of black Vinyl Dye
-3 coats of Red Vinyl dye
-2 coats of gloss Krylon banner red
-Citadel Black and silver detailing
-Testors enamel gold detailing
-3 good coats of Rustoleum Matte clearcoat

Pretty nice.

http://www.youtube.com/watch?v=7TXpjpMaPt8

[Defender 7]

First up is my Supermaxx 5000 with a Brass Breech


I also have another Supermaxx 5000 coming in the mail

Next is my Pump-Action Retaliator using the Rough-Cut Pump Grip


And lastly is my Stryfe, Rough-Cut Integration

[gopowergoh]

Here is my take on the Stryfe Roughcut integration:
The Stryfe has the resistor and locks removed, rewired with fast deceleration mod, 3 trustfires and one dummy battery.
The Recon barrel has been gutted and a much wider barrel has been put in.
The Roughcut had 2 6kg omw swarmfire springs in it. The locks have been removed and dart posts trimmed so it can accept any nerf dart.
Paint job is krylon fusion hammered metal.

Edited by gopowergoh, 24 January 2013 - 12:50 AM.

[2TAGS]

I don't praise queer wye's nor queer "hoppers" I like them for close quarters office wars.

Edited by 2TAGS, 24 January 2013 - 06:09 PM.

[ShaNayNay]

Work in progress. Swapped its internals for a Panther tank. Everything is complete except the seal. The stock can also be removed by unscrewing the blaster and taking out the gray back plate and placing in a different one.

[Datum]

Brassed Jag matches stock elite ranges with proper darts ^-^
Spraypainted with outdoor plastic furniture paint, wooden grips made from a scrap 2x4 in my yard and varnished with spare varnish. Attached by way of pins and screws.

[ilikefish58]

Pantherfly





Internals



Also, didn't think it was worth a new post to show basically the same blaster I already posted, but I repainted my pinpoint sight to match my LS.


1-26-13 edit:
Hydro Cannon with mongo hopper.


http://www.youtube.com/watch?v=npd2N4VnrpE

Edited by ilikefish58, 26 January 2013 - 12:42 PM.

[pit viper]

Retaliator with removable Rough Cut masterkey and flashlight holder:



The Rough Cut is held on with some velcro and a little tac rail to tac rail attachment I made using a Recon and Longstrike flip up sight:



The flashlight holder is just a slightly modified AT3K trigger:



What is this?



REMOVABLE POWERSTOCK!!!

[481IceDragon]

If you want to buy this pm me.

[T da B]

Here's my hoppered Lego Atlantis Harpoon Blaster that I run off 5 pumps. Mods include the following:

• 16-inch barrel made from schedule 80 PVC and polyethylene tubing
• Plugged pump
• Skewed hopper for better visibility
• Only the wye is glued in place, allowing for interchangeable barrels and hoppers

Check out the full write-up at my blog: http://nerfbuff.blogspot.com

Cheers!
~T da B

Edited by T da B, 27 January 2013 - 05:05 AM.

[481IceDragon]

[quertyman]

My supermaxx 5000. SM5K

Has 9/16 brass breech and tank relocation (duh) and plugged pump.
freakin... awesome

Edited by quertyman, 29 January 2013 - 07:37 PM.

[Super0dp]

IMG_20130130_135736 by Super0dp, on Flickr
A voltage modded barricade

IMG_20130130_135717 by Super0dp, on Flickr[/img]
Nerf MP7 equivalent
Stryfe with locks removed and 4 trustfires

IMG_20130130_135546 by Super0dp, on Flickr[/img]
Mad scientist pistol

IMG_20130130_135507 by Super0dp, on Flickr[/img]
Another angle


Sorry about the picture quality, camera was acting up

Edited by Super0dp, 30 January 2013 - 03:06 PM.

[ilikefish58]

Commission for McKnight1990



Two tone, word to your mother.


Got a ghetto cardboard spacer for the time being until he orders a venom one or whatever he wants to do with it.

Fun fact: Blue and Grey 3k shells don't fit together perfectly like you'd expect.

[quertyman]

Recently finished big blast svt4b, for sale here
rattler: cpvc barrels
firestrike: minemized and cpvc couplered

Edited by quertyman, 30 January 2013 - 10:51 PM.

[c0c0puffs]

Here's my retaliator.





+Added longshot frontgun barrel to original barrel
+Removed ARs