5162 replies to this topic

[Eraser475]

Very Sexy ^



Added a tactical rail from a busted Reflex slide to my custom Xploderz Xblaster 200:

[TheSilentRebel]

Some paintjobs I did awhile ago...



Still my favorite.



Sold it.



Also one of my favorites.

Edited by TheSilentRebel, 08 May 2012 - 02:12 PM.

[Griever 2112]

Did the mod guide, but never put it here.

My modded Clear X Ball Blaster II

[makeitgo]

My friend's daughter (11) was upset that her Longstrike didn't perform as she expected. He knew I modded Nerf blasters and asked if I'd "make it go". ...Hehe. He's in trouble! She likes to shoot her dad.







Basic 4 (stock) dart RSCB. It can hold 7 or 8 Stefans. SuperMaxx 3000 tank. Using an OPRV, I've limited it to 70' with a full clip.

...The paintjob I have planned will be very girly.

[bluebarracuda]

I just finished up on this longshot. It has an extra spring from ebay and the AR removal. For the paint job, I just used some left over spray paint I had lying around.

[ilikefish58]

Finished the vulcan from my writeup.

[Coop]

ERTL Pump Action Shotgun - Visible modifications include: Recon grip added, ¼” polycarbonate trigger, and Raider stock added. The stock remains detachable, just like a normal Recon.



Longshot for Xellah - Visible modifications include: ¼” polycarbonate shotgun-style priming grip. The plunger rod, while in the primed position, activates an LED priming indicator.





Nerf Stampede



Nerf Barricade



Nerf Rayven w/ AirTech 2000 - Visible modifications include: AT2K attached to a Recon barrel extension. The AT2K has 17/32 brass barrels.


The barrel/AT2K is removable.



Nerf Alpha Trooper



Nerf Rayven - Visible modifications include: Addition of Spectre barrel



I only title and describe my pictures for people that search for particular modifications within this thread. I don’t mean to insult your intelligence by stating what has obviously been done.

[popatachi]

Hornet pistol with big salvo tank.

Youtube Video

[CaelynTek]

This maverick has the cylinder swing out mod (whatever it's called) and the new flash hider is made from a Tropicana single serving orange juice cap.



This Jolt has no physical mods other than removal of the NERF logo.


These were made as props for Steampunk costumes, hence the removal of logos.

[hamoidar]

Here is my new creation: the hamtch. It uses the full metal catch I designed.

USER WAS WARNED FOR THIS POST

[Gears]

Mod times after coming back from school are the best. Sceptor ala Ice Nine and an insane MM/Raider combo, codename: Panty Raider.

Sceptor: Gears
Panty Raider: Muttonchops

Edited by Gears, 11 May 2012 - 02:18 AM.

[akira yakuza]

This is my Switch Shot EX-3 and my sons Jolt EX-1, both have been fully modded, the Switch Shot has a max range of 59' and the jolt has a max range of 47' both were tested at 30deg elevation.

[LT DAN ICE CREAM]

Making Raiders war worthy is the cool thing to do. Stuffed a UMB tank in there, removable barrel, clothes hanger trigger, McMaster OPRV (50265K23).

[mysterio]

Sticker on the Master Blaster peeled off on both sides, so I replaced it with a TARDIS-themed one.



Expanded airflow.



Close-up of sticker.

[kevne]

Inspired by the 1968 classic, 'Night of the Living Dead" I present, for your viewing pleasure, 'Barbara'.



All of the standard mods are here. Including wood effect Shotgun Grip, Brass Breech (insert style) And...



Integrated Torch (so you can see the zombies in the cellar).

The paint job took me a while with primer and basecoat layers (black spraypaint). Then Citadel colours for the handles and dry-brushed weathering effects (Boltgun Metal and Tin Blitz).

[Phree Agent]

Buzzbee Flintlock







The V-neck takes it over 9000.

Still uses the stock priming mech, so I had to use the stock spring so it didn't break its self. Has a 1 in. plunger tube with a rubber washer seal.

Edited by Phree Agent, 13 May 2012 - 10:49 PM.

[Exo]

It's Exostein's Monster! I had an old NF shell that had an ugly PJ on it, so I scraped it off, but there were some areas that were hard to get, but I liked it because it looked like dirt and grime, so I enhanced that effect, and added some blood. The bolt helps the effect a little bit. I also added a wood foregrip I had for another NF project that never happened, and I had some custom internals that were mostly experimental. The tube is a sink drain, so it has the same ID as 1.25" PVC, except it's much thinner (OD is smaller), and the inside is perfectly smooth, just like a stock PT. I used aluminium U-channel for the plunger rod, so all of the moving parts (spring not counted) weigh only 61 grams. It uses a spring I got from DIB, it has a 5.5" draw, but may be a bit weaker than ACE 49's. There are actually two stains on the wood, and I wanted to go for three (one just in the grooves) and a clear coat, but this thing was supposed to be done a week ago, so I just hurried it through.

[kevne]

Here is a very special blaster I made for the missus. She has supported my hobby for years so I thought I'd say thanks.



Again, all the standard mods are here including a brass breech.



Since her handle is Purple Dragon, I decided to make it the theme for the paint job. The paint job was a mixture of spray paint and Citadel colours.

[Doubletap]

I present to you, the DoubleTap Raven part one!
Features 18v of power, a clean paint job, plasma dash motor replacement, and soon the addition of a poly carb window and LEDs

[NerfNoob10]

I decided to make twins, so now my dad has no excuse not to go to a war with me.

Edited by NerfNoob10, 15 May 2012 - 09:56 AM.

[BritNerfMogul]

IT'S GAME OVER MAN! IT'S GAME OVER!

[deadshooter711]

Attached 2 hornet tanks onto the side, and integrated the pump into the priming handle. The barrels on the tanks came off during a war, so I plan on attaching them directly to the side of it somehow without them getting in my way. There's a small air-leak, but I plan on fixing that soon, and as of now they're good as a quick back-up.

The BBB is just CPVC couplered.

[BabyGandhi]

The Red Baron

[darknyght00]

Turreted, pump plugged SSPB. Still working on the turret but it's one of my favourite pieces. The handle is a stub of 1/2" PVC covered in gorilla tape.



Pump replaced, couplered Tetra Strike. A friend had this lying around collecting dust so I offered to breathe some life into it. The mess hanging off it is a RF20 pump valve which, unfortunately, does nothing to stop the leak in the bottom tank's valve (didn't pinpoint it until everything else was done). The pump I picked up at Target for about $6. It's double action so the entire thing is full at 3-4 pumps (a very nice improvement).


The SPARK. I learned about this project from Dyxlesic's post here on the haven and he credits CHEESYPIZZA001, DOOM, BOOT, and KIDFLASH with its conception and initial prototyping so I will too. Thank you all.

Closeup of the SPARK regulator. Allows pressure to be adjusted in the SA firing tank and allows the SA feature to function without a bladder.

I actually finished this back in August but never got around to posting. Whoops.

The SPARK has been a blast (see also: pain, joy, adventure) to build and use. I kinda wanted to put a better pump on it before I retire the thing but I don't think it's gonna happen. As you can see, I have an elastic band holding the pump in the closed position. Without it, the pump I'm using shakes loose when I run which can quickly cause awkward situations. This one has been fun but I hope what I have in the works doesn't give me quite as much trouble.

[Griever 2112]

This is my Bazookafied Style BBB

A few changes to his original design, I kept the top part, instead of the LSFG barrel I used one from a Scout, and I don't remember his spring combo but mine is currently the stock BBB and a OMW (I think) 6kg spring.

Also my BBB is the Hawkeye Avengers edition as opposed to the original purple.
My ranges are slightly off not sure if it's over powered or my darts suck, but my average is 65 feet. I hit 75 long and short maybe 55. I am thinking of just sticking with the stock spring only... feed back on that would be nice.

That's it fully loaded.