Modification and Paintjob Pictures
Posted 07 May 2012 - 08:03 PM
Added a tactical rail from a busted Reflex slide to my custom Xploderz Xblaster 200:
"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo
"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.
Posted 07 May 2012 - 08:23 PM
Still my favorite.
Also one of my favorites.
Edited by TheSilentRebel, 08 May 2012 - 02:12 PM.
Posted 08 May 2012 - 02:59 PM
Basic 4 (stock) dart RSCB. It can hold 7 or 8 Stefans. SuperMaxx 3000 tank. Using an OPRV, I've limited it to 70' with a full clip.
...The paintjob I have planned will be very girly.
Posted 08 May 2012 - 08:20 PM
I just finished up on this longshot. It has an extra spring from ebay and the AR removal. For the paint job, I just used some left over spray paint I had lying around.
Posted 09 May 2012 - 01:42 PM
Longshot for Xellah - Visible modifications include: ¼” polycarbonate shotgun-style priming grip. The plunger rod, while in the primed position, activates an LED priming indicator.
Nerf Rayven w/ AirTech 2000 - Visible modifications include: AT2K attached to a Recon barrel extension. The AT2K has 17/32 brass barrels.
The barrel/AT2K is removable.
Nerf Alpha Trooper
Nerf Rayven - Visible modifications include: Addition of Spectre barrel
I only title and describe my pictures for people that search for particular modifications within this thread. I don’t mean to insult your intelligence by stating what has obviously been done.
On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.
Posted 09 May 2012 - 10:48 PM
This Jolt has no physical mods other than removal of the NERF logo.
These were made as props for Steampunk costumes, hence the removal of logos.
Posted 10 May 2012 - 03:43 PM
Posted 11 May 2012 - 02:15 AM
Mod times after coming back from school are the best. Sceptor ala Ice Nine and an insane MM/Raider combo, codename: Panty Raider.
Panty Raider: Muttonchops
Edited by Gears, 11 May 2012 - 02:18 AM.
WoW is destroying my life.
LAWN GNOME LIBERATION FRONT
Posted 11 May 2012 - 11:32 AM
Posted 12 May 2012 - 07:57 PM
Close-up of sticker.
If two powerful is a problem then just go with one powerful. I guess this style of hopper will work even beyond three powerful..
15:46 *** Buff is now known as TheGdiddler
15:51 TheGdiddler I'M GONNA GRAPE YOU"
Posted 13 May 2012 - 12:37 PM
All of the standard mods are here. Including wood effect Shotgun Grip, Brass Breech (insert style) And...
Integrated Torch (so you can see the zombies in the cellar).
The paint job took me a while with primer and basecoat layers (black spraypaint). Then Citadel colours for the handles and dry-brushed weathering effects (Boltgun Metal and Tin Blitz).
Posted 13 May 2012 - 10:48 PM
The V-neck takes it over 9000.
Still uses the stock priming mech, so I had to use the stock spring so it didn't break its self. Has a 1 in. plunger tube with a rubber washer seal.
Edited by Phree Agent, 13 May 2012 - 10:49 PM.
Posted 14 May 2012 - 01:05 PM
Posted 14 May 2012 - 03:30 PM
Again, all the standard mods are here including a brass breech.
Since her handle is Purple Dragon, I decided to make it the theme for the paint job. The paint job was a mixture of spray paint and Citadel colours.
Posted 14 May 2012 - 06:00 PM
Features 18v of power, a clean paint job, plasma dash motor replacement, and soon the addition of a poly carb window and LEDs
Posted 15 May 2012 - 09:56 AM
Edited by NerfNoob10, 15 May 2012 - 09:56 AM.
Posted 19 May 2012 - 07:32 PM
The BBB is just CPVC couplered.
Posted 21 May 2012 - 11:24 PM
Turreted, pump plugged SSPB. Still working on the turret but it's one of my favourite pieces. The handle is a stub of 1/2" PVC covered in gorilla tape.
Pump replaced, couplered Tetra Strike. A friend had this lying around collecting dust so I offered to breathe some life into it. The mess hanging off it is a RF20 pump valve which, unfortunately, does nothing to stop the leak in the bottom tank's valve (didn't pinpoint it until everything else was done). The pump I picked up at Target for about $6. It's double action so the entire thing is full at 3-4 pumps (a very nice improvement).
The SPARK. I learned about this project from Dyxlesic's post here on the haven and he credits CHEESYPIZZA001, DOOM, BOOT, and KIDFLASH with its conception and initial prototyping so I will too. Thank you all.
Closeup of the SPARK regulator. Allows pressure to be adjusted in the SA firing tank and allows the SA feature to function without a bladder.
I actually finished this back in August but never got around to posting. Whoops.
The SPARK has been a blast (see also: pain, joy, adventure) to build and use. I kinda wanted to put a better pump on it before I retire the thing but I don't think it's gonna happen. As you can see, I have an elastic band holding the pump in the closed position. Without it, the pump I'm using shakes loose when I run which can quickly cause awkward situations. This one has been fun but I hope what I have in the works doesn't give me quite as much trouble.
Posted 24 May 2012 - 07:25 AM
A few changes to his original design, I kept the top part, instead of the LSFG barrel I used one from a Scout, and I don't remember his spring combo but mine is currently the stock BBB and a OMW (I think) 6kg spring.
Also my BBB is the Hawkeye Avengers edition as opposed to the original purple.
My ranges are slightly off not sure if it's over powered or my darts suck, but my average is 65 feet. I hit 75 long and short maybe 55. I am thinking of just sticking with the stock spring only... feed back on that would be nice.
That's it fully loaded.
My Youtube Page
Griever 2112 still plays with his alpha trooper quite often despite owning one of the scariest +bows.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users