5162 replies to this topic

[pskibobby]

[nicholasy11]

Here's my element shits and giggles bow with eraser's maverick turret speedloader:

[Eraser475]

CPVC Rouge:



Here's a Nitefinder I got today from a friend at school and I modded it almost right when I got home. It literally had some black crusty gunk stuff in it . I am pretty sure it has been outside for some time because the priming handle and trigger are pretty faded. It has a halved coupler, improved seal, and has been minimized. I plan on eventually filling the gap with styrene:

Edited by Eraser475, 01 December 2011 - 08:56 PM.

[popatachi]

Contract finished! Video Overview

[mysterio]

Ta-Da! Hoppered RF20 piston!





Close ups.













Hopper on a different blaster.



I apologize for the sideways & upside down pics, photobucket is slow at updating.

[SlightlySane813]

Haven't posted here in a while.

Octoshot, annoying as hell to make.



My newest addition to my arsenal.



Inspired by LT. DAN ICE CREAM!!!'s Salvocon





The blast button and back of the tank are visible through the back.

[Green Wing]

My At3k Raider. Might paint it sometime.




Great primary, holds 5 Stefans and shoot very hard and accuratly. One of my favorite new primaries.

Full Video
Firing

[iamthatcat]

PPK/VP70ish NF with just a little more to do.



This one has a bit more power. It needs more work, tweaking and a paintjob

[Pause]

My cpvc'd Jolt:

Titan Mav:


Woah thats big. Sorry.

[Pointman9]

First post.

NF rifle with a homemade, 12-shot, rearloading cylinder.


Showing the rearloading ports and slip clutch rotation mechanism.

This thing is still in development, so that's why it's not very clean

Edited by Pointman9, 07 December 2011 - 11:15 AM.

[nix0101]

RSCB'd titan in a deploy

[taerKitty]

Barricon. I'm going to name it 'Barrie' after a young lady I once knew and pined for. Has feeding difficulties - I didn't know to shove the clip as far forward as I can, so I left the front nub that supports the turret. That 2mm is critical.

As you can see, it's a cut down LS stock. The beauty of this is that the LS stock can still be used, just with a lower profile a la' FA24's Lancer mod. It's held on with about 5 sticks of 4" x 0.45" hot glue, so it's as solid as an <idiom>.

This isn't the first instance of this implementation, either. pSyk did it a long while ago. Gluing the sawed off chunks of turret shroud was just a whim, and it looks pretty clean. Hm, given my .signature, maybe I should think of ways to fuglify it...

[andtheherois]

Hongfuu's Internals replaced DT3. Fires like crazy.


Primed.

[Catastrophe]

I can't follow simple instructions. HURRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR

Edited by Langley, 07 December 2011 - 10:52 PM.

[Eik]

Sharp Shot





Brass dry-brushed over black
Fluorescent green with green ink drybrushing

Edited by Eik, 09 January 2014 - 12:10 AM.

[kingjulien]

Recon + Magstrike. Work in progress, but all the hard stuff is done.

[Ice Nine]

Mod party a million! It's like Christmas!







Presenting the 4BJAX. The A-10 Warthog II of Nerf guns.

[Eraser475]

My PAS all painted. I think I did pretty good for a first paint job. I need to work on making curves with painters tape, though :/





LOL FAIL



Didn't notice that until I took the pictures.

[mysterio]

Storage mode.



Action!









Pretty low profile.





Piston movement. The firing video is also on my channel.

[rjgbrain]

New style of an efficient Nitecon, and modded clip for better performance.

[structure]

Bolt-action Recon.


EDIT: Unintended bonus: I can now prime this one handed using my jeans pocket, sweet.

Edited by structure, 11 December 2011 - 09:32 PM.

[Pause]

Hopper'd Big Blast

Mav/Titan

[archangel24]

No, I'm not dead, for those who were possibly wondering. Now this gun is like foreskin, useful, but not needed.

Edited by archangel24, 14 December 2011 - 06:07 PM.

[Flaminace2468]

Behold, the TitanStrike! A soon-to-be finished clean integration of a Titan tank into a Longstrike body!Easily capable of firing whistlers/taggers/etc. with 1/2in PVC barrels, of 1/2in CPVC barrels (because everyone loves to massacre cardboard every once and a while!) I actually put nails through the couplers and the original Titan barrel so I didn't have to use epoxy. Also added an $8 bike pump I got at Wal-Mart that fit perfectly over the nozzle of the Titan tank after I cut the hose. Plus it doesn't get in the way. Keyring trigger. Extra dart storage holds about 8 stefans or 4 streamline. I'm only got the base coat on for the paintjob, but I love it already.

Edited by Flaminace2468, 09 January 2012 - 09:53 PM.

[archangel24]

Don't take this the wrong way, this build is in honor of my family members that have been and are in the USAirforce.

I am in no way condoning the "militarization" of Nerf blasters with tacticool gear and what not for S&Gs.