5162 replies to this topic

[roboman]

A few AT2K parts:

Aluminum couplers, PETG-Aluminum "transition barrel"


Male coupler detail.


Female coupler detail.

I figured this stuff should go here, since it's for an AT2K. If I'm wrong, please let me know.

[mysterio]

Old pic I never posted up, writeup if I feel like it.

Tetra Strike






Here's something I call Large Larry. Tiny Tim's older cousin.



Fun as hell.

Edited by mysterio, 03 November 2011 - 10:47 PM.

[nerfispwnage243]

After a really long time of not doing much of anything, here's my work in progress Stampede-A. It's not modded in any way, but the voltage will be increased as soon as my batteries show up. All orange parts (including the PVC barrel components) will be black with silver faux usage and the rest of the blaster will also have some silver touch-ups here and there.
If you couldn't tell, I was inspired by that N7 Stampede that someone made a while back.

Edited by nerfispwnage243, 05 November 2011 - 09:52 PM.

[spencerak]

My ZombiFinder: My ZombiFinder was built by combining various NF parts from my parts bin and putting them in a screwed-up NF shell that has seen a ton of abuse, and by abuse I mean first I lost the original catch spring and tossed it in my parts bin, then I attempted to make a rainbow catch and a 1 1/4" PVC plunger tube. After that I realized that I shouldn't try to work with polycarbonate with only a hacksaw, a dremel and a drill. Next I made my second Attemped to do a tri-FInder with some other internals, but that failed more than the first Attemped when I actually had it perfect but then lost one of the pieces while assembling it. Then a few weeks ago I tried to integrate an SSPB into the handle which also failed like everything else that I tried to do to it. Now I made it work after about 20 minutes of work and 10 minute of searching for pieces of it I finished if and made it work. It has a stonger catch spring, an Ace #49 spring that I had handy, an increased seal, a 1/2" CPVC no dead space coupler and 3/4" PVC with 3/4" PVC cut in half around it for the handle with the head of a 12 gauge shotgun shell form duck hunting Friday and yesterday stuffed in it (12 gauge shotgun shells have and airgun fit in 3/4" PVC for those who care).

[NerfRogue83]

I dig Jolts

[popatachi]

Shorty Maverick Youtube video

[spencerak]

I made a large Larry too. It is very easy and took a grand total of about 15 minutes because I shortens then lengthend the tubing Between the tank and the SSPB blast button a few times until I was very happy with it and searching for an SSPB shell because the SSPB I used was dead in my parts box.

Edited by spencerak, 07 November 2011 - 10:50 PM.

[NerfRogue83]

More JOLT Pornz!

I dub thee........"MEGAJOLT"




Yep---that's a BuzzBee "Rogue" turret :twisted: ---17/32 barrels, improved seal, BB"Rogue" spring, and dead space minimization. Even with the turret it hits better than stock ranges, with obviously higher ROF.

[hamoidar]

Behold, the vulcling gun.



You crank here to fire the gun. One turn, one shot




My 15 volt, super stampede. Mods: Ar removed, Tech Target spring, 15 volts.(10 AA batteries) It gets around 65 to 70 feet flat.




Custom battery pack.




Cut down front.

[Acid96]

This is a 17/32 Angel Breech Longshot with a Maverick integration.

The breech is a combination of coop772's and ACnerfshop's breech.

[gehaga]

Painted Doomsayer.


Wire hanger attached to the back of my Nerf tacticool vest for easy mounting and dismounting of my primary during HvZ.(the knife still unsheathes with ease)

[hamoidar]

Langley Edit: This thread is for pictures, not discussion!

[spencerak]

BBB that I built for my friend: 8" RSCB with 3" barrel



CPVC coulpled Blizzard pistol splat:

Edited by spencerak, 12 November 2011 - 12:07 AM.

[smeagolsaur]

I just put together this Barricade for HvZ games. I dremeled the plastic below the dart drum to receive the stampede bipod attachment. It's nice to have something to hold onto right there and looks pretty ballin. The red-dot sight is helpful when trying to locate zombies in those dark & hard-to-reach places

[blitz]

Well, I finally got off my ass and modded some stuff.



Airzone triple shot with centered bushing, stock, PAS and recon springs. Would have more, except the ridges in the back of the shell that hold the Pr in place have bent, and won't catch. Hits 100' with a hopper.



A shittly painted LS "crossbow" with a doubleshot on the bottom. Hits 100' with a 3-dart inline.



A PETG 17/32 brassed LS, hits.. 85 right now. Has stock, airzone tripleshot, and recon spring inside. Am going to milk more power out of it. NEEDS A CLIP.



A cpvc bow-armed marshmallow crossbow. Hits far better ranges than with the stock bow arms. Hits 100' with hopper.

[Keo]

1st Pic Before detailing



My first real "Overhaul" of a Nitefinder, Couplered, Ace 49 main spring replacement and Ace 2 for the catch. The Handle gray is is stock from the Whiteout Nitfinder, green and black coats with Krylon Spray paints and then since it already really look Green Lantern-ish, I added the detailing to take it all the way with Games Workshop Goblin Green and Chaos Black.

Edited by Keo, 14 November 2011 - 08:44 PM.

[Eik]

Maverick commish
Montana Black 'Atomic Megablast' & 'Seal' + aluminum drybrushing

Edited by Eik, 09 January 2014 - 12:06 AM.

[Eraser475]

Speedloader for BBB lol



Maverick turret speedloader:



Quadshot:



Re-barrelled sspb:



Couplered reflex:



Couplered Nitefinder:



CPVC'd tetra strike:



Pump action spectre:



Painted maverick:



Couplered BBB:



RSCB UMB:

[mysterio]

Cup seal for a 3b. Inversion, placed in PT overnight, then added some rubber washers from a dollar store water piston and 3/4" pvc to hold it all in . Ridges shaved off.

[ilikefish58]

TAMU themed Stampede I did for a commission.

[autonerf]

New version of the double shot.

[Eraser475]

PAS I just got and couplered

[roboman]

Finally finished mysterio's WF turret. It has a Venom spacer and 19 thickwall PETG barrels. I didn't have quite enough PETG to do 20, so I used a piece of Mcmaster aluminum for the 20th. I made an aluminum spacer because half of the center rod snapped off. This is tapped for a 5/16-18 bolt, which holds the spacer and barrels against the back plate.


Installed.


Front half.


Spacer.


Ugly super glue is ugly.

Also, evidently, I can paint now.

Edited by roboman, 25 November 2011 - 07:34 PM.

[Gears]

I really enjoy UMBs because they're basically the best dickgun since the 4B. Here's a simple little shell modification suggested to me by JLego after having fallen in love with the BRISC magazine at HbH5. All you do is cut off the faux-carrying handle from one half of the shell and run the BRISC along the entire natural groove. Super easy, super cool. (sorry for the craptastic cell phone pic!)

Edited by Gears, 27 November 2011 - 07:02 PM.

[structure]