5162 replies to this topic

[Vinnie D]

My first mod. I brought it back out of retirement and fixed it up with a better seal, better barrel, and coupler. The light has been replaced with more dart storage. Since it stores 9 darts in total, and has a rather Luger like profile I opted to name it "Red 9".


A rebarrelled Tek 3. It takes a hacksaw to get the barrels off, but it's worth it for the improved range. It may have a tiny plunger but the spring in that thing is pretty strong for something so tiny. An ideal assassin gun.

[Zorns Lemma]

I have the raw of the firing video too but I probably won't find time to do it for ... ever.

[Whisper101]

Because I am broke, I have been doing what any broke nerfer does. Retooling old guns!!!

Remeber this guy?

I got tired of his bitchin' so I gave him what every guy wants (sarcasm) a makeover:


side one

side two

front
he now sports a snazzy red PJ (Tig is right; red is a bitch to work with, even though it looks cool), a 1/2' PVC coupler and an off center pumping handle. I'd like to say that I did that on purpose but I didn't. I just screwed up. It actually feels more ergonomic to pump though; try it! Ranges: can shoot through cardboard. 'nuff said.

Next up is a 3k that has been lying around in my shop that I finally got around to:

It sports a removable stock-kudos to the unholy 3 for the idea

rearloading of course, and a MS pump. Ranges: couldn't test 'em cuz of the bib bad bully below. Suffice it to say that it's good, real good. bitch.

Finally, we have the aforementioned big bad bully below. it is currently a contestant in the Nerf Revolution Cosmetics Contest. Wish me luck!!!
So here's what I began with:


yeah, you all remember this bad ass. I posted it here a while ago.
Anywho; here are the fruits of my efforts (drumroll please):






I basically just cleaned up and smoothed out any problems. I did, however add my own little twist to the angel breech...

PM me with comments/questions/etc...

[nerfdartsmith21]

Lanard Shotgun, 9" Mcmaster Petg barrels, longshot spring added, better seal, spring reorientation, rear loading. This thing gets 80-90 feet flat. My new primary.

Edited by nerfdartsmith21, 02 April 2010 - 04:40 PM.

[shadow archer]

My singled longshot with a titan and two hornet tanks integrated.

Edited by shadow archer, 03 April 2010 - 01:50 AM.

[BritNerfMogul]

Updated NF


Added the belt clip from a $1 store tape measure


And THIS gives it a 9000ft range

[atomatron]

This sat in pieces collecting dust for 6 months, I used it only once at the exSOF war in August..

I put it back together only to find that I really don't have a use for it, so I'm selling it.

It has a [k25] spring,a 1' 17/32" brass insert and that is a different turret, the Etape is mostly for show, though it does add to the purpleness.






EDIT: MORE STUFF WITH NEW CAMERA

Tetrastrike with pex barrels:


Awesome tiny big lots blaster:

Edited by atomatron, 03 April 2010 - 11:04 AM.

[Lucian]

Painted my Bob 2 reincarnation:


My 2k with barrel spacers made by me, shoots a little over 100ft with Blacksunshine darts:


My Stormfire with integrated 2k, like Jerm78's:


And my old primary, my Rfsg:

[Aj]

Little something I did a while ago....





Wiring is essentially invisible on this side



But there is some visible on this side.. was basically impossible to have none visible near the battery due to space restrictions..





Going to attempt this again, trying for less hotspots/more even coverage

Also check it out on the YouPoops

Peace

Aj

[cheesypiza001]

I just finished up a Maverick. Mods include: Rear loading, CPVC barrels, straw mod [dead space removal], spring replacement, "Roulette mod", plunger tube - turret seal improvement, plunger tube seal improvement, catch spring addition, and trigger spring addition.

[louiec3]

I finally got around to finishing my stefan drum.
Thanks to Zorn for posting his write-up. After reading it I figured out the problems with my first version.

It always jams when the follower is entering the clip, but it is fixed by moving the jam wheel a tiny bit.

[ricochet rebels]

Re-shelled SSPB with external tank hook up


Internals

[Flaming Hilt]

Nothing new, but it works well and it's been a while so I figured I may as well post it. The strap runs through mechanics' wire which is just wrapped around the edges of the gun. I had to dremel the shell a bit to get it the way I wanted. I can pump it with my left hand by putting my thumb behind the pump shaft and holding the pump between my 2nd & 3rd fingers.

Now all it needs is a tank expansion.

[Gears]

BallZerker:


GangstaShot:

[stuper bunny]

I'm an idiot for posting only text in a PICTURES ONLY thread.

Edited by CaptainSlug, 08 April 2010 - 09:58 PM.

[popatachi]

My 2nd RSCB BBB. This time the clip is in the top rail and goes all the way to the back of the blaster. It is made from 5/8" PETG with a 9/16" breech in the gap where the shells come apart. It holds 10 1.5" stefans. There is a replacement plunger head and a [k26] + BBB spring combo. On the PETG is a piece of thinwall PVC that acts as a stopper so the blaster cannot be overdrawn. I'm experimenting with a 6" and 5" barrel setup.

Edited by popatachi, 09 April 2010 - 08:04 PM.

[Zorns Lemma]

>>>Wow I actually got around to uploading the firing video!<<<

[Ice Nine]

The second Unholy Three Big Blast. It shoots projectiles far and has a supa' sub-optimal pump handle.





OOOOH SHIT WHAT'S GOING ON HERE?!





MAN YOU DON'T EVEN KNOW.

At the last mod party: We made one video, we made another video, and we modded some Cheez-Its.

Edited by Ice Nine, 10 April 2010 - 01:53 PM.

[nerfdartsmith21]

Modified AT2k, 6 inch PETG barrels, plugged pump.

[BustaDartInYOurAss]

I think it was totally worth it...i just need to paint the stock and put in the fore-grip

[hawkshot]

Finished contract for Rogue.

Meet: the new and improved RogueFinder.


Draw extension, INSANE padding(pic below), very strong catch spring to hold a beastly spring, ziptie keeps the top of the gun held together, bottom dremeled out in preparation for an integration.

I decided to keep the original spring that was in it before the draw extension, but due to the draw extension the spring would hit full compression, which severely weakens the spring. Therefore, the massive padding. It also serves as a cushion from impact and silences the blaster!

With a 5 inch CPVC barrel and single BB stefans(1/5''), it hits cardboard from 20 feet away very hard. My guess is roughly 70 feet.

[NerfRogue83]

Transformers-themed LS #2........

IRONHIDE!





Inside?.........






An unobstructed view......complete with see-through jam door......

[TheNoob]

first time dry brushing. second paintjob.

[SonReeceSonJensen]

Another cube-to-cube moderately modded goodie. Also a crappy PJ, but that happened before I actually modded it.


EASY CROSSFIRE MOD: 3 pennies and a Maverick spring replaced stock spring: as good as a brassed stock-springed and AR removed NF.

[popatachi]

Okay, last updates on these LnL's.

Plunger handle replacement. No more keyrings.

Edited by popatachi, 15 April 2010 - 09:12 PM.