5162 replies to this topic

[pwr1]

This is my long shot. I got it with a crappy paint job and missing a charging handle. it has all the standard mods. ar removal and un necessary component removal plus a spring replacement and paired up with the stock spring.

next is the DTB which is phase one integrated into the long shot it also has a spring replacement and a 1/2" cpvc barrel replacement.

[pwr1]

This is my nerf Firestrike

MOD'S:
1/2" CPVC barrel (obviously)

New catch spring (from the clip retainer in the stock of my LS)

dremd out the catch slot on the bolt

Spring replacement (includes stock spring a vulcan spring and a random spring i had laying around)



Im going to give this gun to my little brother for x-mas along with a singled LS that i will post soon.

[zack0909]

Overhauled Expand A Blast with integrated Raider pistol.

[Ice Nine]

War prep, as per usual.

LPL (Lock Panther Load):




Work in progress. The pump shaft on the back of the LBB tank is almost the exact diameter of the pass-through hole for the turret system on the Mad Hornet:

[ornothing77]

The Magshot, a Magnus Longshot Integration

[rockinon96]

This is what I have been working on since the last time I posted something here:

As far as I know the first Nerfed-Boom Co. Blaster. I introduce you to the Nerf Farshot.









Mods I have done to it are:
Replaced the barrel with Cpvc, and then some
Added a barrel extension thing just because I can(not recommended unless you have a spectre barrel)
Integrated a nerf handle on to it (Because I am like 5'10-ish, the handle was comfortable, but too small for me)(I used a demolisher handle for this.)
Nerf rail added, Going to add another on the other.)
Tech Target Spring added(And originally I had a spring I salvaged off of a party popper, Kind of a spring hoarder when it comes to this stuff)
Improved seal
And priming handle removed, but replaced with a keyring.(not shown but I later added some E-tape for some comfortability when I prime it)


A Demolisher rocket launcher That was comepletely rebarreled for any micros, I give you the "Rockin-launcher"


Mods I did to it are:
Seal Improvement
Cpvc Barel replacement
Silver and Gold Paintjob(made it look sort of rusted on the handle, with some silver accenting in the divets)
Mods need to be done:
Cpvc Elbow, to make firing the thing less akward

[meishel]

I'm new here, but I'm not new to nerf. Here's what I have done as far as cosmetics:



The Maverick has dropout mod, AR removal, and a few pennies behind the spring.
The Stryfe has some RM2 motors, a 2s lipo in the jam door, and completely re-wired.



This is my current project. It's a Lanard First Shot. I re-barreled it with cpvc, improved the seal on the o-ring, and it shoots 70ft flat pretty easily with elites (I don't have any steffans, but hopefully that'll change soonish) It will be mostly silver, with neon green accents and tip to make it look like an alien blaster.

I've got a lot more on the way.

[Joey Skylark]

This is my Strongarm with a paintjob and a few mods.


LED lights up when primed. Then goes out when fired.


The tactical switch is actived by the the rotating turret mechanism.




The turret has had the barrel pins removed and back cut out for rear reloading. Also I cut the side of the turret off to expose the barrels.


The trigger has been cut out just for aesthetics.



Side by side with my stock strongarm.
All logos have been removed along with the loop/strap things on the bottom and back of the gun.
I went with bright green and black with sliver rubb n buff on the paintjob.

And here's my jolt I did at the same time.
I changed the spring for a tex 6 spring I love this little blaster.




I've left the AR alone on these two Im not sure if I should do it. Some say it's better some say it's worse. I just don't know

Edited by Joey Skylark, 04 January 2015 - 10:45 AM.

[Zombona]

One of my better modifications. The Speed Trudgeon.

The rest of the album can be viewed here.

I would include a teaser picture but apparently Imgur pictures are not welcome.

Edited by Zombona, 05 January 2015 - 10:51 AM.

[pwr1]

This is my new AT3K. I have yet to paint it so it looks a little crappy but shoots and feels great.









so obviously the AT3K is singled but what i find unique is that i have replaced the original pump (leaving it intact) and put in a bycical pump now I know meany people have done this but i have yet to see someone intagrate a big blast into the the side of the gun and it is powered by the original AT3K pump and i used a long shot charging handle held in with epoxy putty to prime it.

Edited by pwr1, 07 January 2015 - 11:42 AM.

[Xene451]

Just thought id share my first attempt at modding ^^its for a friend (housewarming gift), now he likes losers AND nerf guns, sooooo~

I decided id make him a nice one x3

After purchasing a couple of second hand guns i went to work and ended with this
(This is my first attempt ever xD so it may be a tad rough )

Internal mods
-Air restrictor removal and Bleed hole cover
-secondary mainspring added (from another nerf gun)

External mods








For those who like distances best i can say is that it shoots about as faf as a stock 07 recon (thats with the loser barrel on, im too scared to pull it off xD

Edited by Xene451, 27 January 2015 - 09:25 PM.

[JDude]

Here is some painting I've been working on. The first one is steampunk, the second one futuristic, and the 3rd one post-apoc. These are the first 3 paintjobs I have ever done. What do you guys think?

[southpaw]

Simple Tech Target mod with CPVC'd AT2K turret. Short barrels as this is intended for stock dart events.





The purple connector piece is a BIC pen cap.





Nothing crazy, but first mod in 5+ years for me. Feels good getting back into it

[tomorrowsDarkness]

Name: Barbecue Chicken
Mods Done: Level 4 modifications; Priming bar reinforced, spring rest reinforced, catch reinforced, rebarreled with a setup that allows me to use mega and elite darts via 1/2" cpvc and 3/4" cpvc couplers.
Integrations: N/A At this time; Splitfire (much wow, very original) and AT3k planned.
Comments: Found this baby on eBay and I finally had some cash on me, much to the wife's dismay. I didn't touch her for a while, wanting to keep it pristine and stock (she only had a small crack in the bow arms and was missing the bowstring when I found her) as long as possible. I finally started attending some weekly wars and decided I needed to bust her out and spruce her up. First couple wars, she stayed stock; using only a 1/2" cpvc barrel for elites e-taped and crammed into her original barrel. The week after, I decided I needed to actually bring her up to standards.

After fixing her up, I'm quite pleased and plan on completely gutting her internals and doing a full custom set so she's perfect. Needs a little more reinforcing at that point, but that'll come whenever the internals do.
As for the name, I go by Coleslaw at my wars. I figured, "Hey, what goes great with coleslaw? Barbecue chicken!" and so the name was born and embedded into her heart. Now all she needs is a couple secondary pistols (Forky and Spoony) to complete the set.

[MAV13]

Rapidstrike with full 180 swap and some other goodies

[tetsuhau]

How'd I do? First job at paint and modding.

Rewire with 18
2 IMR Efest
Paint

[dialga949]

Not the brightest crown in the box, but still, paintjob. (dont question why i stripped the paint off the tip)



ps: first post =p

Edited by dialga949, 14 February 2015 - 06:36 PM.

[Xenon]

LCMS Themed nerf Strayven

Edited by Xenon131, 19 February 2015 - 01:07 AM.

[Duke Wintermaul]

I think this is all my newer stuff, more to come.

[skeptiker]

Fallout styled Doublestrike with BombOmb. Added a second spring.

[rockinon96]

This is my MEGA CycloneShock I modded. I give credit to our fellow member and Youtuber, Drac, and Mag212.





It is Complete to MY standards, which incude:
Mega to micro Conversion (with CPVC)

AR Removal



Various Spring Additions, which I finally settled on an OMW 5KG Retaliator Spring. (just because I didn't feel like buying an EAT, Rampage, or Retaliator just for their springs.)



tweeking the catch with a shortened OMW catch Spring



and Skeletonize the barrels



and Lock Removals



There was one problem when I modded it though. The first time I modded it, I thought a certain white piece on the prime was a lock, so I took it out. After I did that, It wouldn't rotate consistently. So after a couple of hours of trying to fix it, after I lost that piece, I got pissed and Just decided to open that part up, and goop it in place.



And while I was at it with the goop, I just reinforced the rotation mech.



Sorry for the last pic being bad. Had a cell phone the whole time taking these pictures.

right now, in unnoficial ranges, the farthest it shot a hotglued Elite was somewhere between 200-300 Feet at the biggest angle I could maximize the shot. on a level shot, again, unnoficial, It reached 150-ish feet.

[Griever 2112]

Modded Cycloneshock.
A/R Removed, 5kg OMW Spring, locks removed, CPVC Barrel replacement/addition, rear-loading slot.

[MasterousMods]

Here are a few of my mods...
https://plus.google....874375382818663

https://plus.google....357995635367105

[Duke Wintermaul]