Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#4201 akira yakuza

akira yakuza

    Member

  • Members
  • 5 posts

Posted 25 September 2012 - 04:35 PM

This is my Elite Rampage, it has had the AR removed and it gives me a range of 70' flat.
Posted Image

Posted Image

I loved UKnerfWar's Raider with the wood effect foregrip, i think it makes the blasters look so much better.
Posted Image

The stock was taken from a Stockade, i removed the dart holder and put in some elastic so it now holds two clips instead.
Posted Image

This is what i like to call a Surface Angel, it has an LED Lamp and a Red Dot Laser Sight, also the green LED indicates that the blaster is primed and the red LED indicates that the clip is empty.
Posted Image

The underside shows the home built battery packs for the Laser and the LED indicators.
Posted Image
  • 0

#4202 djfoam

djfoam

    Member

  • Members
  • 9 posts

Posted 25 September 2012 - 06:06 PM

CARBON EDIT: We can do without text in +6 Impact, thankyewverymuch.

Hey guise I did some modding after my 2 year hiatus. I never got validated back in the old days and finally got a chance at membership when the site was opened. Also I'm ashamed to admit it but I actually ended up emailing the admins to validate me...great troll guys.

ANYWHO MY GUNS

Longshot shell with AT2K tank, chopper, and totes unsafe magstrike bladder. About 100'
Posted Image
Posted Image
Posted Image
Posted Image


Single breach Titan. Spring in the stock so it's easy to hug the gun with your shoulder, and about 150'
Posted Image


Inline clipped TT (5 darts). It's got full draw, 1" thinwall PT, and hits 120' with bungie (perfect seal)
Collapsed:
Posted Image
Extended stock with breech open:
Posted Image


My Raiderbow with returning handle and a new chopper (~130'):
Posted Image
Posted Image


Two pistols with 2 shot inline clips, perfect seals and maximized draw. Both hit ~100' so whatever
Posted Image
Posted Image


Finally, the blaster (wtf do I call this thing) that won me the FU contest or whatever (130' or whatever). TMNT paint, Michelangelo because, no duh.
Posted Image
Posted Image
Posted Image

There was more, it's just not worth posting really.

Edited by Carbon, 25 September 2012 - 09:42 PM.

  • 0

#4203 zombiecure12

zombiecure12

    Member

  • Members
  • 1 posts

Posted 26 September 2012 - 07:19 PM

hey guys first post hope you like
modded mech 20, shortened to pistol length and using 9-volt
Posted Image
shortened tech 4
Posted Image
comparison
Posted Image
  • 0

#4204 Pinky77

Pinky77

    Member

  • Members
  • 2 posts

Posted 27 September 2012 - 03:49 PM

Posted Image
nerf guns by scottpinkston32, on Flickr

Posted Image
nerf blowgun by scottpinkston32, on Flickr

Posted Image
nitefinder by scottpinkston32, on Flickr

Posted Image
noisy cricket (titan/maverick) by scottpinkston32, on Flickr

Posted Image
nerf bow n arrow by scottpinkston32, on Flickr
  • 0

#4205 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 28 September 2012 - 05:38 AM

Posted Image

Ready For HvZ
  • 0

#4206 Green Wing

Green Wing

    Member

  • Members
  • 68 posts

Posted 30 September 2012 - 10:40 PM

Posted Image

Posted Image

Posted Image

Posted Image

BBB AT2K Integration - The Hazard
More details and firing in the video:


  • 0

#4207 Phoenix66

Phoenix66

    Member

  • Members
  • 64 posts

Posted 01 October 2012 - 08:50 AM

Well, I definitively can not beat that, but I do have this.
Posted Image
Stencil PJ Done with some pre made stencils I got at Ace Hardware.
  • 0

The more the merrier (except if you're a 10 year old with a foam sword. In which case - the fewer the better)


#4208 Acerised

Acerised

    Member

  • Members
  • 21 posts

Posted 01 October 2012 - 03:05 PM

My Aussie ERTL RFSG and PAS. The RFSG did not come with a Turret and it has a 32mm PVC Plunger Tube now.

Posted Image
  • 0

#4209 ProfessionalNerf

ProfessionalNerf

    Member

  • Members
  • 23 posts

Posted 05 October 2012 - 09:51 AM

ballistic knife
Posted Image

Posted Image

and my minimized stampede, with clip dry sensing
Posted Image
  • 0

#4210 Buffdaddy

Buffdaddy

    Do not buy from this member

  • DO NOT TRADE
  • 824 posts

Posted 06 October 2012 - 08:01 PM

Posted Image

Contract RFSG, at last step before final assembly :)
  • 0

#4211 BiwinningPanda

BiwinningPanda

    Member

  • Members
  • 172 posts

Posted 07 October 2012 - 10:47 AM

W.I.P. Nite-Finder rifle for mod exchange with bhajj94:

Posted Image
  • 0
LT.DAN ICE CREAM!!!!!! In response to the Tribal Council: Someone break out the Michael Jackson popcorn gif, this shit just got interesting.

#4212 ShaNayNay

ShaNayNay

    Member

  • Members
  • 254 posts

Posted 07 October 2012 - 02:35 PM

NOTE: BuzzBee Panthers are now available at all Toys R Us locations. They cost $5, sport a grey and black color scheme, and are labeled under the Air Zone line (still has a BuzzBee logo embossed in the side, so they are not knockoffs). Now not only are Panthers easy to find and obtain, but they come in a slick color scheme.

I picked one up, cut off the orange glued tip and barrel, removed the air restrictor, and turned the former air restrictor housing section into a 1/2" coupler. I plan on adding a stronger spring in the OPRV, an actual CPVC coupler, and cleanly adding a tactical rail where the black portion currently is. Right now its only getting about 50-60" flat with 6 pumps and a 6" barrel.

Posted Image

Edited by ShaNayNay, 07 October 2012 - 04:55 PM.

  • 0

New Jersey is fuckin weird


#4213 Silvertooth

Silvertooth

    Member

  • Members
  • 7 posts

Posted 07 October 2012 - 04:43 PM

Modified buzz bee tommy 20
Posted Image
Posted Image
Posted Image
Posted Image
  • 0

#4214 Nerf Gra

Nerf Gra

    Member

  • Members
  • 145 posts

Posted 08 October 2012 - 07:42 PM

Didn't want to renecro the "longstrike (and longshot?) priming handle reinforement" thread so I figured Id just post this here


I actually threaded the end of the metal rod

Posted Image


cut off the little flaps that usually hold the rod. Which if you are doing this more than likely one or more of them is already broken. Just cut them off down to the gaps.

I Epoxied on a nut (and for the love of God don't use hot glue) to match the threading. (10-32 IIRC) Make sure the nut fits inside the handle bit that the screws go into before you glue it in

Posted Image


Its a good idea to apply the epoxy with the bar threaded in so you dont get any in the threads.


Posted Image


This also makes it so your blaster can sit flat against a peg board if thats how you store your blasters.

Also when you put it on a blaster I like to have the UNMODIFIED side facing me so to cut down on the stress on the nut and epoxy and to reduce the chance of accidentally unscrewing it mid war.

Hope this helps. PM me if you have any questions.
  • 0
QUOTE(VelveetaAvenger @ Dec 6 2010, 12:14 AM) View Post

Maybe there's no Mcmaster, but you could make the first coconut airtank.


#4215 Coop

Coop

    #sogoodmuchtacticswowinit2winit360noscopehax0rleetbeastmodeactiv

  • Members
  • 775 posts

Posted 09 October 2012 - 04:33 AM

Rampage
Posted Image

Pull-back Pump Action Shotgun w/ AirTech 2000 and Spectre grip.
Posted Image
Internals
Posted Image

Rayven with a Maverick attached. Just for the LOL's!
Posted Image
  • 0

On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.


#4216 Effekt

Effekt

    Member

  • Members
  • 2 posts

Posted 09 October 2012 - 04:41 AM

Hey guys,

This is my first post and my first attempt at a Nerf mod.

As you can see it is a Nerf Nitefinder, I took the AR out of it and re-sealed the air chamber then hand painted the gun in jet black and gun metal.

Posted Image

Posted Image

Call me self riteous but i love how the paint work came out,

Thanks for checkin it out :)
  • 0

#4217 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 09 October 2012 - 06:46 AM

Banana clip made from an 18 round stick mag and the clip from a x-shot thundershot
Posted Image
Holds 16 rounds, and fits in everything but the recon/retaliator.
Posted Image
  • 0

#4218 Funky Mutha Facko

Funky Mutha Facko

    Member

  • Members
  • 118 posts

Posted 09 October 2012 - 07:24 PM

I have always used Super Soaker Max D 3000 pumps on my overhauled sspb's with great success. So naturally I wanted to add one to my panther. It fits inside the panthers pump tube.


Posted Image

Posted Image

Posted Image

OPRV kicks in at 7 pumps and is still hitting as hard as 15 pumps plugged. PM for more pics.



And I know you are sick of panthers, so am I. We really need to start doing better things with them than this.
  • 0
HARDCORE NERF!

#4219 Silvertooth

Silvertooth

    Member

  • Members
  • 7 posts

Posted 10 October 2012 - 12:31 AM

Nerf praxis
Posted Image
Posted Image
Posted Image
Posted Image
  • 0

#4220 Silvertooth

Silvertooth

    Member

  • Members
  • 7 posts

Posted 11 October 2012 - 07:46 AM

Nerf Nitron. Winter camo paint theme. 18650 battery mod. Scope mode, flashlight head wit 20 LED and a red dot laser, this is wired to the gun and controlled with two different tact switches. Very bright for the flashlight and red dot.

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
  • 0

#4221 Silvertooth

Silvertooth

    Member

  • Members
  • 7 posts

Posted 11 October 2012 - 08:12 PM

Stampede.... Urban camo paint job. Raider clip....laser light diode wired in with pressure switch activation on handle.
Posted Image
Posted Image
Posted Image
Posted Image
  • 0

#4222 Effekt

Effekt

    Member

  • Members
  • 2 posts

Posted 12 October 2012 - 03:14 AM

Heres my second Nerf mod attempt, i just finished painting it about 10 minutes ago,

It's the Nerf Maverick Rev-6, i baased the paint work off Trigger Happy's guns out of Skylanders and added a few of my own touches. I also took the AR out, Added coins to the spring and applied the "drop barrel" mod.

Posted Image

Posted Image

Posted Image
  • 0

#4223 hamoidar

hamoidar

    Member

  • Members
  • 367 posts

Posted 15 October 2012 - 04:07 PM

Here is my double secret strike. It is stupid and impractical, but it sure is fun! :lol:
Posted Image

All parts are connected with super glue.
Posted Image

Posted Image
  • 0
NerfHaven > Your control panel > Profile > Change Signature > Inserts dumb sig > What! No pictures! > Inserts next best thing: http://nerfhaven.com...howuser=114052' class='bbc_url' title='External link' rel='nofollow external'>Best thing on Nerfhaven!

#4224 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 16 October 2012 - 09:05 AM

STOP YOUR GRINNING AND DROP YOUR LINEN!!!

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
  • 0

#4225 ArcAngelXVI

ArcAngelXVI

    Member

  • Members
  • 6 posts

Posted 16 October 2012 - 10:49 PM

Posted Image

The original ABS bolt nub sheered off and broke, so I went ahead and remade it from polycarbonate. Also decided to make a collar for increased stability.
  • 0


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users