5162 replies to this topic

[akira yakuza]

This is my Elite Rampage, it has had the AR removed and it gives me a range of 70' flat.




I loved UKnerfWar's Raider with the wood effect foregrip, i think it makes the blasters look so much better.


The stock was taken from a Stockade, i removed the dart holder and put in some elastic so it now holds two clips instead.


This is what i like to call a Surface Angel, it has an LED Lamp and a Red Dot Laser Sight, also the green LED indicates that the blaster is primed and the red LED indicates that the clip is empty.


The underside shows the home built battery packs for the Laser and the LED indicators.

[djfoam]

CARBON EDIT: We can do without text in +6 Impact, thankyewverymuch.

Hey guise I did some modding after my 2 year hiatus. I never got validated back in the old days and finally got a chance at membership when the site was opened. Also I'm ashamed to admit it but I actually ended up emailing the admins to validate me...great troll guys.

ANYWHO MY GUNS

Longshot shell with AT2K tank, chopper, and totes unsafe magstrike bladder. About 100'






Single breach Titan. Spring in the stock so it's easy to hug the gun with your shoulder, and about 150'



Inline clipped TT (5 darts). It's got full draw, 1" thinwall PT, and hits 120' with bungie (perfect seal)
Collapsed:

Extended stock with breech open:



My Raiderbow with returning handle and a new chopper (~130'):




Two pistols with 2 shot inline clips, perfect seals and maximized draw. Both hit ~100' so whatever




Finally, the blaster (wtf do I call this thing) that won me the FU contest or whatever (130' or whatever). TMNT paint, Michelangelo because, no duh.




There was more, it's just not worth posting really.

Edited by Carbon, 25 September 2012 - 09:42 PM.

[zombiecure12]

hey guys first post hope you like
modded mech 20, shortened to pistol length and using 9-volt

shortened tech 4

comparison

[Pinky77]

nerf guns by scottpinkston32, on Flickr


nerf blowgun by scottpinkston32, on Flickr


nitefinder by scottpinkston32, on Flickr


noisy cricket (titan/maverick) by scottpinkston32, on Flickr


nerf bow n arrow by scottpinkston32, on Flickr

[BritNerfMogul]

Ready For HvZ

[Green Wing]

BBB AT2K Integration - The Hazard
More details and firing in the video:

[Phoenix66]

Well, I definitively can not beat that, but I do have this.

Stencil PJ Done with some pre made stencils I got at Ace Hardware.

[Acerised]

My Aussie ERTL RFSG and PAS. The RFSG did not come with a Turret and it has a 32mm PVC Plunger Tube now.

[ProfessionalNerf]

ballistic knife




and my minimized stampede, with clip dry sensing

[Buffdaddy]

Contract RFSG, at last step before final assembly

[BiwinningPanda]

W.I.P. Nite-Finder rifle for mod exchange with bhajj94:

[ShaNayNay]

NOTE: BuzzBee Panthers are now available at all Toys R Us locations. They cost $5, sport a grey and black color scheme, and are labeled under the Air Zone line (still has a BuzzBee logo embossed in the side, so they are not knockoffs). Now not only are Panthers easy to find and obtain, but they come in a slick color scheme.

I picked one up, cut off the orange glued tip and barrel, removed the air restrictor, and turned the former air restrictor housing section into a 1/2" coupler. I plan on adding a stronger spring in the OPRV, an actual CPVC coupler, and cleanly adding a tactical rail where the black portion currently is. Right now its only getting about 50-60" flat with 6 pumps and a 6" barrel.

Edited by ShaNayNay, 07 October 2012 - 04:55 PM.

[Silvertooth]

Modified buzz bee tommy 20

[Nerf Gra]

Didn't want to renecro the "longstrike (and longshot?) priming handle reinforement" thread so I figured Id just post this here


I actually threaded the end of the metal rod




cut off the little flaps that usually hold the rod. Which if you are doing this more than likely one or more of them is already broken. Just cut them off down to the gaps.

I Epoxied on a nut (and for the love of God don't use hot glue) to match the threading. (10-32 IIRC) Make sure the nut fits inside the handle bit that the screws go into before you glue it in




Its a good idea to apply the epoxy with the bar threaded in so you dont get any in the threads.





This also makes it so your blaster can sit flat against a peg board if thats how you store your blasters.

Also when you put it on a blaster I like to have the UNMODIFIED side facing me so to cut down on the stress on the nut and epoxy and to reduce the chance of accidentally unscrewing it mid war.

Hope this helps. PM me if you have any questions.

[Coop]

Rampage


Pull-back Pump Action Shotgun w/ AirTech 2000 and Spectre grip.

Internals


Rayven with a Maverick attached. Just for the LOL's!

[Effekt]

Hey guys,

This is my first post and my first attempt at a Nerf mod.

As you can see it is a Nerf Nitefinder, I took the AR out of it and re-sealed the air chamber then hand painted the gun in jet black and gun metal.





Call me self riteous but i love how the paint work came out,

Thanks for checkin it out

[BritNerfMogul]

Banana clip made from an 18 round stick mag and the clip from a x-shot thundershot

Holds 16 rounds, and fits in everything but the recon/retaliator.

[Funky Mutha Facko]

I have always used Super Soaker Max D 3000 pumps on my overhauled sspb's with great success. So naturally I wanted to add one to my panther. It fits inside the panthers pump tube.








OPRV kicks in at 7 pumps and is still hitting as hard as 15 pumps plugged. PM for more pics.



And I know you are sick of panthers, so am I. We really need to start doing better things with them than this.

[Silvertooth]

Nerf praxis

[Silvertooth]

Nerf Nitron. Winter camo paint theme. 18650 battery mod. Scope mode, flashlight head wit 20 LED and a red dot laser, this is wired to the gun and controlled with two different tact switches. Very bright for the flashlight and red dot.

[Silvertooth]

Stampede.... Urban camo paint job. Raider clip....laser light diode wired in with pressure switch activation on handle.

[Effekt]

Heres my second Nerf mod attempt, i just finished painting it about 10 minutes ago,

It's the Nerf Maverick Rev-6, i baased the paint work off Trigger Happy's guns out of Skylanders and added a few of my own touches. I also took the AR out, Added coins to the spring and applied the "drop barrel" mod.

[hamoidar]

Here is my double secret strike. It is stupid and impractical, but it sure is fun!


All parts are connected with super glue.

[BritNerfMogul]

STOP YOUR GRINNING AND DROP YOUR LINEN!!!

[ArcAngelXVI]

The original ABS bolt nub sheered off and broke, so I went ahead and remade it from polycarbonate. Also decided to make a collar for increased stability.