5162 replies to this topic

[iamthatcat]

There is a Magstrike in this pic.



I am trying a conservative, measured approach to intergration here. Ayup.



The sneaky sideways Jolt is really fun.

Edited by iamthatcat, 13 January 2012 - 01:32 AM.

[Shaar]

Slamfire-only alpha-trooper, designed to be fired from the hip.

Mods: Spring upgrade, trigger locked, locks removed, metal priming bar added, LEDs.

Longshot.

Mods: ARR, raider barrel, spring upgrade, plunger padding, shotgun grip, LEDs/EL wire.

Stampede with Swarmfire integration.

Mods: "mode selector (with dual fire mode)", Swarmfire integration, ARR, Spring upgrade, Voltage mod.

Had a great load of help with some of the electronics with the above blaster from a good friend of mine.

And finally, SSPB with BS barrel:

(Credit to mysterio for this idea)

Edited by Shaar, 09 January 2012 - 10:22 PM.

[Exo]

My first contract, a LS and an LSK, mostly a refurbish job. Lock removal, ARs, stock removal/locking, and scrubbed off the black sharpie job with simple green.

Sorry for the fuzzy pics, my camera has a tiny screen, and not much memory.

Before: LSK


After: L+R shells, Left turned out better.



Before: LS, It was like the kid dropped them in a swamp, the insides were nasty, shell had minor sun-fading.



After: LS, the grey didn't scrub up too well, but the blue came out great.


Together, finished.


And just for funsies, I added a modder's etch.

[landstricker]

Re-barreled my quadshot



It has 10'' cpvc barrels, extended draw, longshot+stock spring and a homemade wooden barrel spacer.

[Eraser475]

LOOK, ANOTHER NITEFINDER!!!! (I promise its not the same one I posted a few days ago)



Ar removed and improved seal Quick 16. Wasn't as tough to get together as some people made it sound. Then again, I might of just been lucky.

[False]

Minimized with coupler and it is hand painted.

By false_ at 2011-12-02

LS + stock spring, quadded and improved plunger seal.

By false_ at 2011-12-27

SSPB with Hornet tank and PETG barrel.

By false_ at 2012-01-15


By false_ at 2011-12-03

General mods, spring and catch replacement, ARs.

By false_ at 2012-01-15


By false_ at 2012-01-15

Overhauled NF with tacticool light. Picture is from ages ago so the quality is less than impressive...

By false_ at 2012-01-15

[Funky Mutha Facko]

FurFinder







Green Lantern Maverick

[Exo]

Some stuff I finally got around to posting.


Handcannoned quad, wood stock (stained last night!) RCB Carbine, works, but the seal's crap, too much friction, looses lube too fast.


BBUSB, finally got around to resurrecting it, Reactor that I got for $3, cuz' it had no balls, I eventually (removeable) hoppered it, insane speed, gets 50' with good darts.


Rogue turret, the catch broke about 3 shots after I finished the barrels, I eventually did this to it, not really worth using.

WOW, didn't realize how shaky those look.

Edited by Exo, 17 January 2012 - 11:54 AM.

[nine]

Deploy with nitefinder plunger tube.



Picture of the catch.

[popatachi]

Contract blasters all finished!

Youtube Video

[TagMaster247]

http://www.facebook.com/media/set/?set=a.154324964615054.26384.143804085667142&type=3#!/photo.php?fbid=290490984331784&set=a.154324964615054.26384.143804085667142&type=3&theater
Maverick I did a couple of years ago.

http://www.facebook.com/#!/photo.php?fbid=252823571456542&set=a.252823534789879.61539.252717624800470&type=1&theater
My "New Orleans Saints" Nitefinder I did probably about a year ago.

I'll be doing more as soon as it get's a little bit warmer (And drier) outside.

Edited by TagMaster247, 19 January 2012 - 09:03 PM.

[Eraser475]

Xploders pistol thing I got on clearence for $6. It has a 3 streamline/6 stefan RSCB.

[airgunner332]

This is my first post! This is a blaster I painted for a friend. The Recon's PT broke so we thought we'd have some fun with it. There has been a Maverick integrated, and we combined one and a half NF plunger tubes into the recon with a [k26].

[Nerfomania]

Internal Breeches FTW!









The breech on the Sm5k has a new breech design courtesy of my own mind. Basically this breech allows me to have a short tight section of 17/32 brass telescoping into PETG. The PETG length is changeable on the fly. The brass is about 1 inch of 17/32 if you load a dart int the front portion of the breech. The breech is 4 layers thick with a 21/32 close.

The LnL is a 4 inch? 17/32 barrel, using Popatachi's method minus the breech tab (I don't trust glued on tabs).

They both still need some final finishing on the shell cuts, otherwise they are complete.

The 5k does 100' on 6 plugged pumps with slug darts. Much further with domes (like 130+) so needless to say I will be using Domes with it (We DGAF down here in the SE)

the LnL does around 60'

[Ranger Dave]

Brass barreled Nitefinder with air restrictors removed and a spring replacement. Notable features include LED flashlight integration, pocket clip and Dragon Army (Enders Game) paintjob.


Maverick with straw mod, air restrictors removed and a cool paint job.


My roommates steampunked shotgun

[Ranger Dave]

-Accidentally posted twice. My bad, it won't happen again-

Edited by Ranger Dave, 21 January 2012 - 06:40 PM.

[HasreadCoC]

MavTitan, 1.5" PVC coupler'd

[mrdarkmonkey96]

Here is a Nerf recon that my little brother, who is ten painted by himself. he wants to be just like me, but he needs a little practice..


Let me know what you think so I can tell him!

Edited by mrdarkmonkey96, 23 January 2012 - 07:09 PM.

[Shopian]

My modded longshot/swarmfire integration. The top one is brass breeched longshot, middle one is x-powered (from xplorer) and the bottom one is reshelled buzzbee barbarian with 3 darts hopper clip. All swarmfires have spring replacements and voltage increased.

[ThatBritishGuy]

17/32 brass breeched lanard shotgun - 65-70ft


Crayola barrelled X-Stream Blast bow - really crappy blaster with internal bungee - 40ft tops


17/32 brassed pistol splat, draw extension, increased plunger seal, increased plunger travel, spring precompression - 50ft


Olympia style doubleshot commission - stock - 10-15ft

[False]

Hoppered with 12" conduit barrel. I'm not sure what colour I should paint the black bits or if I should just leave them. Opinions are wanted via PM.


By false_ at 2012-01-26

By false_ at 2012-01-26

[KainZero0133]

My last paintjob i did was my barricade based on Warhammer 40k. I made the pirity seal from hot glue, the paper was already this color amd it is construction paper




No internal mods have been done.

[False]

Finished up the paint job, I went with drybrushed silver for the black parts. Also, I made a range test video hereon my channel. Results: flat- around 100ft, angled- 115ft


By false_ at 2012-01-28

By false_ at 2012-01-28

By false_ at 2012-01-28

By false_ at 2012-01-28

Feedback is encouraged

[Eik]

Took a break from some of the larger projects in my queue to work on a couple of pistols

'Nomad' nitefinder with Jolt integration &
Tan eliminator with ARs removed and resin in handle for weight



UMB I did a little while ago




Sneak peak of a comission...

Edited by Eik, 30 January 2012 - 06:08 PM.

[Shaar]

My deploy, with 6kg spring, and ARR/lock removal.

The stock has been cut to house a raider magwell, and the shotgun grip has been cut to accommodate a jolt instead of an extra dart. The barrel attachment is removable, and is made from a vulcan barrel, cut, and ultilises a LSFG connecting ring.

Edited by Shaar, 30 January 2012 - 07:35 PM.