5162 replies to this topic

[white moonlight]

I've officialy hit my 12th Nitefinder.
Nitefinder Rifle is still under maintenance.
Here it is...



Ranges: Far
Power: Possibly the culprit of a broken garage door window.

As always for any questions PM me.

Edited by white moonlight, 24 November 2009 - 06:23 PM.

[Eh Watt]

About time I made a contribution to this... I like the lego gun, Merz!


My SM750 with a 9/16" brass barrel nested in PVC for protection. On the side is my ramrod holder, made from two parts of the LSFG and an old spring.


My BBB next to the SM750. Draconis modded the BBB, I did some touch ups, and Split sold me the marvelous salvos. I'll put some barrels on them later.


Front view of the BBB. I think I'll name it "UHNHNHNHNH". Busta sorta came up with the name. I'll need to fix that crooked lower MS...

Like Whitemoonlight, feel free to PM me with any questions or comments.

i have a nice camera.

Edited by Eh_Watt?, 26 November 2009 - 12:39 PM.

[Vinnie D]

A rather old mod of mine. The recon there has a CPVC barrel carved to fit together tightly with the stock breech. It still needs a lot of air to fire, and only the titan displaces enough to do it. It gets 180' with filled streamlines and pierces cardboard. Never did get around to painting it. It's more of a screw around with gun than anything else.


Based on Riff's laser from Sluggy Freelance. http://sluggy.com
Ranges are terrible, but it's more a prop than any kind of performance gun.

[rork]

A BBBB, pump replaced, with a 6-round RSCB clip:



A couple of decrapified Mega Missiles, one with a half-length Franklin ballpump, the other with the full version:



My NF. Spring added, seal improved, relocated ammo holders, removed light, integrated SSPB into the ammo holders, cpvc couplered.

[diamondbacknf1626]

Vulcan...nothing special. Improved seal, removed internal ars and belt ars. Made it R.C. car battery accessable. Shoots loads faster and a little farther. Super fun to use:

Many more guns later...

Edited by diamondbacknf1626, 06 December 2009 - 11:45 AM.

[bakenbitz]

[cheesypiza001]

A Current Work In Progress:



UPDATED:

Edited by cheesypiza001, 29 November 2009 - 12:33 PM.

[NerfRogue83]

Ok, something new for you kids to check out......




Why is there a section of a Transformers Generation 1 (1985) Optimus Prime trailer on the side of this blaster?



Here is why:







LOTS of hard work and Bondo........and inside the LSFG---a semi-usefull set of internals, PETG barrel+ double springs+super catch spring+seal improvement.

[Glint]

- 8 shot, manual rotating turret
- Read loading
- Perfect (dead serious, absolutely perfect) Plunger tube - Turret seal
- Insanely comfortable
- Amazingly snazzy if I do say so myself

[atomatron]

Newer stuff/I haven't posted it yet:

Larami SuperMAXX 1000:


Whipshot, CPVC coupler gets ~80':


Spiderman thingy:


SuperMAXX 1500 ala CaptainSlug

[NerfDude1138]

With winter ahead, here is a pair of pistols painted up for the winter war season. In each case they have been modded with CPVC couplers. The NF has a heavy duty industrial spring.



Nerf on!

[NerfRogue83]

A few "friends" making the trip to RFC with me this weekend......





My three favorites on the wall.......




Optimus Primary receives new detailing on the stock.....

[Blaze145]

My longshot/primary. It is painted black with green details. big pics








Singled breech open



Singled breech closed



Uses a boltsled and is singled

Integrated front gun. cocking mech not on.

I am getting 100 ft flat. No joke.

P.S. Dates on the pics. are wrong.
Hope you like it.

[SPV999]

New Nitefinder: The Cleaner

I made it for my dentist when I get my braces off in a month
Mods are standard barrel, spring, and LED replacement.

[white moonlight]

No it's not another nitefinder.
My nerf arsenal as of December 1, 2009.

Edited by white moonlight, 01 December 2009 - 06:33 PM.

[Galaxy613]

My "Kuru", Sonic Bazooka with Doubleshot intergration. It gets ranges, and the doubleshot is surprisingly powerful and accurate.

Fielded effectively at 2009 DC Thankgiving War

Edited by Galaxy613, 01 December 2009 - 09:02 PM.

[Goggles]

This is a Crossfire with two Secret Shot Pocket Blasters integrated onto where the ammo storage bit used to be.



The Crossfire has a 17/32 Brass barrel, and the SSPBs have McMaster-Carr PETG, which is very close in size to 1/2" cpvc, but probably a little too tight. It looks cooler than cpvc, but I feel like I might regret using it over some fairly loose cpvc that I also had on hand.

[NerfDude1138]

Yo, my Recon/singled LS. Props to Jerm78 for his idea.




Key ring cocks the bolt back, second spring in plunger tube.


ARs removed from both.


Warhammer paint.

Nerf on!

[princexbuster]

^ SEXY! I may just have to make me one of those. It's good to see more people bondoing their blasters. Keep up the good work guys.
Just a pic of the good ol' powerclip.


I guess it won't hurt throwing this up here.

Single barrel AND inline clip!

[NerfDude1138]

Here is another Pistolsplat with Vulcan chain mod.




This puppy gets 70-80 feet with crappy sonic darts!

Edited by NerfDude1138, 03 December 2009 - 03:14 PM.

[NerfRogue83]

More Bondo work, a commission for........

It should be illegal to spend this much time on the shell of a blaster......





A few tiny blemishes to correct--then paint this weekend.

Edited by NerfRogue83, 03 December 2009 - 03:02 PM.

[Ryan201821]

Results from Mod Party #5

Sam's Contract



Zeke's awesome 1500



Current arsenal. Fixed +bows, fixed 3k.



Sniperman

[pjotrkuh]

^^you really had to pull those faces and post them here?^^

Anyway here is my extreme-minimized-singled Hornet:

overview left to right: Hornet tank, blast button, plugged hornet pump


Close-up


Generous amounts of hotglue and a few pieces of pvc.....


It only takes 1 pump to get the standard hornet ranges, it "plops" really hard at 3 pumps more pumps result in a weird tank valve screw-up making the dart fall at 2 feet.

It's intended use is/was for an integration into a LS scope (hence black e-tape rings).
But the scope shell is terribly disformed by the boiling water I tried to remove the rings with, wich didn't budge, I only managed to remove the smaller ring...

[oh1134]

Thought I'd show my stuff, because all I've put on the interwebs is two nightfinders hot glued together.
Crappiest first:

Gun made of scrap parts, bbbb shell, signal launcher tank (fits like a glove), big salvo pump, hornet check valve. Not sure on ranges, trigger snapped when I tried to fire it.

Singled LS, don't like. Stock spring, probably like 60'

bbb with Spider-man spring gun, bbb gets 70', smsg 40'. Wrapped in electrical tape for some reason.

NF rifle with a SOLID METAL PLUNGER ROD. It kicks like crazy. Bad seal, gets 40'-50' for various problems that I will solve someday.

PAS, bad zebra-inspired paintjob, was level two, but the reinforcements broke off. It has two PAS springs and a bad seal. However, the foam used to create a seal makes for a plunger opening the width of a bic pen, yet it fires surprisingly well.

Just toys crossbow, interesting mod that allows for bunging (cocking handle affixed to plunger tube), cpvc breach, gets 70' with bungies but kick blows breach open when fired...

And my favorite gun, bbbb with bs integration, very comfortable, bbbb got 120', it just has a leak in the bs tanks. No ranges on bs because... no barrels.

Integration is clean, no adhesives. Used a bolt to attach and foam to keep from wiggling.

Done with sharpie. Says 'I lost the game'. It is balancing on a tissue box.

Have more, will update.

[Ice Nine]

^^you really had to pull those faces and post them here?^^

Clearly you don't really understand mod parties.

Finished my 1500 last night. AT2K tank, Hornet pump, 1500 turret. I need to sand it down more so the rotation is for reals on the turret but it's passable for now. Seal is good. It has a really weird leak though; only sometimes, fixes itself over the next few shots, and never occurs when the gun shell is open. Probably needs some tank sealing around the tubing.









I have a spare shell at home so if need ever be I can go back to using that one, as well as that AT2K tank. Hmm.