Edited by Renegademilitia15, 20 January 2009 - 01:28 PM.
Modification and Paintjob Pictures
#1851
Posted 20 January 2009 - 01:27 PM
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#1852
Posted 20 January 2009 - 11:13 PM
I beat my wife."
#1853
Posted 21 January 2009 - 05:57 PM
#1854
Posted 21 January 2009 - 06:12 PM
Painted 2k for a friend.
It's actually carbon black with hunter green internals.
I know it isn't anywhere close to a great PJ, but this guy is worse than OMC about throwing guns, so...
<3
#1855
Posted 21 January 2009 - 06:24 PM
Edited by VACC, 22 January 2009 - 04:22 PM.
#1856
Posted 21 January 2009 - 08:27 PM
My new primary, Hornet with integrated AT2K:
Colbert 08'
#1858
Posted 22 January 2009 - 12:36 AM
#1859
Posted 22 January 2009 - 03:33 PM
Sm3k blue drop clip mod, plus pressure gauge
Split's Thundersplat - Video at the bottom!
Singled XXL Bazooka
Edited by Splitlip, 25 January 2009 - 08:00 AM.
#1860
Posted 22 January 2009 - 11:29 PM
#1861
Posted 23 January 2009 - 06:53 PM
- 9/16" brass barrels
- Lt. Stefan upgrade spring
- Reinforced priming handle
- Drop barrel modification
- Replaced catch spring
- Black paint job with the essentials left untouched for smooth operations.
Ranges are what I expected, 35-45 feet. That's with Blacksunshine light stefans. When I use the medium weighted stefans ranges drop dramatically. I didn't know dart weight could throw ranges so far! It's still not worthy of an outdoor sidearm, but it's quite fun in my house!
On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.
#1862
#1863
Posted 23 January 2009 - 10:02 PM
#1864
Posted 23 January 2009 - 11:46 PM
Well, I thought I'd update my pictures. Red Star Nightfinder,TechTarget,Longshot, Red and Black BBB and BBMS(Buzz Bee Missile Shot) Vulcan, My Modded Minimized Titan!
The Red Star Breech
Xbox Live- IS2DI RedStar Add me if your up for some games
#1865
Posted 24 January 2009 - 07:51 PM
other side
I am especially proud of the Nerf logo
and the detail on the chamber.
I know it doesn't match up to really good PJs like Salindin's, but it's my first time and I think I did a good job.
-iMod
_______________
The Phoenix | Foam Universe
#1866
Posted 25 January 2009 - 08:03 PM
The full write up:
http://nerfhaven.com...topic=15005&hl=
Edited by Wes7143, 25 January 2009 - 08:03 PM.
If at first you don't succeed, add more epoxy.
#1867
Posted 25 January 2009 - 09:17 PM
PETG 1st Gen:
Star Wars Clone Trooper Blaster: Also balancing on a phone
Defender T3:
All Together:
#1868
Posted 26 January 2009 - 02:56 PM
If at first you don't succeed, add more epoxy.
#1870
Posted 27 January 2009 - 01:24 AM
No tubing.
Beast?
I think so.
<3
#1871
Posted 27 January 2009 - 11:21 PM
It's my first real paintjob, I used krylon fushion and then painted on the silver. I had to use paint marketed for plastic model cars.
GIVE ME FEEDBACK AND ADVICE IF YOU HAVE IT.
#1872
Posted 28 January 2009 - 11:20 AM
Forget about ranges; range means nothing if your blaster is a giant rattle after three shots.
#1873
Posted 28 January 2009 - 05:19 PM
I reinforced the priming bar, trigger, and the plunger head
PVC with a nested CPVC coupler for multi-barrel use.
#1874
Posted 28 January 2009 - 05:54 PM
Writeup
Video
and Ebay Auction
Coming this weekend.
#1875
Posted 28 January 2009 - 08:04 PM
I know, this one is actually a NatGeo, but my OTHER one is a Milton. I had planned on using this as my primary at the failed PWN war earlier this month. The big adapter on the end is a 3/4" Compression adapter, so it has a rubber gasket that compresses around the pressure cylinder, and male 3/4" IPS threads on the other end. The grey adapter is a SCH 80 female 3/4" to male 1-1/4" smooth pipe adapter. I actually load the balls by stuffing them inside the 1-1/4" end of the adapter, then sticking on the piece of 1-1/2" SCH 40 PVC, which I bored out to slip over the 1-1/4", which is in a 1-1/2" couple, with some thinwall 1-1/2" in the end. In hindsight, you could also just use a 1-1/4" to 1-1/2" adapter instead.
Anyway, when I max out the stock OPV, I get 60-70 foot ranges. Less if I use the silly light balls instead of my preferred yellow Target balls.
I also glued 1/2" copper coupler in to the compression adapter, which allows me to use a long (like 12" - 16") CPVC barrel for dart shots up to 150 feet. No joke. Flat. I shot my neighbor, across the street in his yard, from the back edge of my 126' long lot. Good thing he's in college, or he probably would have been pissed.
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?
6 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users