30 replies to this topic

[kickass jb]

Ronster, my best guess would be the first one (the one on the left). Just try to figure out where the air is exiting the pump (to fill the chamber) and chop just after that. Lastmanalive, adding the pvc for an air chamber would make the gun require many more pumps for the same range (with that much more air, the dart with have already left the barrel), so it would negate the whole purpose of the mod.

Edited by kickass_jb, 02 August 2005 - 02:49 PM.

[LastManAlive]

I was talking about just adding a little 2 inch long, 1" peiec of PVC for a better tank. Oh well. All I know is this: Don't use a CPS 2100. Try the 1700 or 2700. They have a great arir output.

[Ronster]

Do you have to chop off the nozzle?

P.S. Is this basically the same way to mod the AT2K like your shotgun mod?

[LastManAlive]

No. Some people are able to stick the gun back into the case it came in. And this is what you want to do with a super soaker. I think all you need to do to modify this thing is to plug the release valve and make a PVC replacment airtank. The little one could be replaced wit ha PVC tank and you could get a hell of a lot more power out of it.

P.S., I have a AT2K that is missing a trigger, might do that mod.

Edited by LastManAlive, 05 August 2005 - 12:55 PM.

[Ronster]

But I dont really want to have to pump it a buch of times to prime it and Im not looking for a loser rifle. Just something pretty good without have ing to pump it alot.

[kickass jb]

Well Ronster what I did was remove the nozzle completly and goop a CPVC coupler directly onto the valve. It wasn't a perfect fit with the case but I just used hot glue around it all so it wouldn't wabble. And yes, for the purposes of gooping the vinyl tubing onto the pump and the valve it is the same as the shotgun mod. (glad to see some people actually appreciating and using my contributions)