1306 replies to this topic

[T-REX]

My first SNAP
I used the sanded pump-grip and handle of a orange Fury Fire, I like the way it looks.

"T-REX" written on one side.

Back view

...and primed. It shoots about 70"-(maybe)80" at a natural angle 'cause the draw is supa-short.

[yksnerf]

Stefans are homemade... Second time making Stefans.





~yksnerf

[Brutal 770]

Why is everyone making back pressure tanks?

[Langley]

Stefans are homemade... Second time making Stefans.

They are not homemade nerf weapons. Suspension for the next person who doesn't post a photo of something they made from scratch that shoots darts.

[atomatron]

Rainfire prototype


Clear hopper

[HasreadCoC]

A Supa-clean Rainbow LSK!





Guess what? Full sized rainbows fit PERFECTLY inside LSK shells


And F yeah, thats a Chuck Norris tee shirt

Features:

6.5" draw

Ryan & Kane rainbow ranges

1.5" Clear PVC plunger tube

Perfect U-cup seal, hand over the end and the plunger stops dead 1/3rd of the way down.

[k26] spring

Modified no-spring-slip Rainbow catch

Replaced standard trigger with 1/4" polycarb trigger

Supa-comfy and stylish polycarb priming handle

Compatible with the stock, but that still getting other improvements


Two other rainbow projects still being built, I'll post 'em when they're finished.

[Nerfomania]

Finished up a PumpSnap for AJ



Handle detail

[Techshooter]

Here is my supa awesome PACsnap!


(still needs to be painted)

I had to figure out how to seperat the metal catch place into to pices so that I could make it 6in. shorter than my original.



And here is the supa sweet pump grip, made out of 2in. PVC because I had it on hand.



And here is its 8 shot hopper. It has a foot long PETG barrel.



The seal isn't perfect because I screwed up the T way back in December when I mad the original. The range is 80ft.+ with glue domes, and around 70ft. with slugs. I may make a writeup (for the contest), but I'm not sure yet.

[Carbon]

The SNAP/Revolution.

...because it's Number 9....Number 9...Number 9...



Also because the internals are different from any other SNAP. I'm going to war test it at SPANO, and make a thread the week after.

Edited by Carbon, 19 April 2015 - 04:46 PM.

[Flaming Hilt]

(TH)^2, a 3DBBQ-style "completely homemade" air gun.

Write-up here.

[Darksircam]

Completely stupid in most wars the NIC does, but semi-useful against stock blasters.



Sword n' shield. We allow shields with melee weapons/singleshot stock pistols in order to level the playing field a bit. The shield is still useless. It's modular though - I could stick more ammo holders on it.

[Eik]

More progress on the Warpbow
Unfortunately, I don't think it will be fully operational before SPANO

[Ice Nine]

Fixed up my plusbow. Needs a bit more work, small crack in the plunger tube means air leaks out (although at a surprisingly slow rate). Goop'll fix it.



Replaced the stock with quarter-inch thick wood and put some cushioning on it. Not gonna break again!



Oh man what happens now?

[Wes7143]

New WIP:



Has the same internals as my bolt action rifle, but has the ability to feed from Nerf brand magazines.





It feeds by sliding the barrel forward and back as you prime, like so:



Please feel free to PM me any questions.

[VelveetaAvenger]

I wanted to wait for the goop to finish drying, so this guy wasn't quite ready for SPANO yesterday morning.

I've actually wanted a shotgun turret for a while now, but after the Cerberus got posted I figured I should actually make one!

Basically the cylinder is built around 2 shaved down 1/2 inch cpvc couplers that had a 5/8th bit run through them to rotate around the 1/2 inch cpvc shaft.
The spring at the front applies force to push the cylinder to the back, where it seals against this...

The Ballcock Shank. Which besides having a hilarious name makes it super easy to keep each barrel in place so you don't have to worry about lining it up. You can find it with all the actual toilet repair/replacement parts in the hardware store. Thanks to Mr. Stark for pointing it out to me! In the picture I am holding the cylinder forwards so you can see it.

The back piece is a 1 1/4 inch coupler. There's a bit of 1 1/4 pvc in there to give the ballcock shank more surface area to be gooped onto. I don't have any 1 1/4 inch pvc around to make another nub to attach to my mav-titan right now though.

Right now the entire thing is just held together with goop. It might benefit from actual screws where the cut-to-fit cpvc elbows are, but so far it's quire sturdy.

The barrels are 6 inches long, wanted to cut down on weight but not make them super short. The seal on one of them needs work, but the others are all solid. I also need to add a metal or plastic washer under the spring, the rubber one I have there now is getting chewed up.

I don't have the 1 1/4 inch pipe I need to actually connect it to my mav-titan, but holding it coupler to coupler I'm getting between 40-50 foot ranges. The barrel with the bad seal gets a little less, 35-40ft. it seems. The titan pump is not plugged.

I don't think I'll post a separate thread, I didn't take build pictures or measurements for a writeup. Feel free to pm me any questions or comments though.

Edited by VelveetaAvenger, 19 June 2011 - 04:38 PM.

[Ice Nine]

Fixed the crack in the plunger tube with some goop (dead stop seal once again) and made a new wood handle for the +bow.



Hooray for hacksaws and sandpaper!

[louiec3]

My pump-action spring ss5k. There is a firing video below.

[MrPzowned]

Aw Yeah! Awww Yeah!
Gentlemen I present S.A.M.P.SO.N (Super Awesome Mr Pzowned Specialty fOr Nerf), devourer of heavens!

Very large, the exact same size as a Longstrike

Edited by MrPzowned, 21 May 2012 - 06:13 PM.

[Eik]

Finished the Warpbow, and added new paint to the VSS
Rustoleum Hammered Silver and Krylon X-Metals


-

[diamondbacknf1626]

Sweet-ass clear SNAPbow adapted to use a skirt seal:


^Shoots so crazy far...(7" Draw, skirt seal, [k26]...)

And another pic of the Rainbow v2, sportin' a plunger stop for all the dry firing your heart could possibly desire:

Edited by diamondbacknf1626, 24 June 2011 - 10:09 PM.

[Zorns Lemma]

Needs a handle. Or I can wield it hamp-style.

Edited by Zorn's Lemma, 25 June 2011 - 12:32 PM.

[b00m13]

I had some spare time last week ^^;

[diamondbacknf1626]

[SorrowX]

Behold! The Mighty Hydra!





and yes, it indexes, of course ^.^

Edited by SorrowX, 29 June 2011 - 09:28 PM.

[Langley]

The ThumbSLAP (Thumb-hole stock Standard LGLF Armament Prototype). It uses the suicide catch, which allows for plenty of room for the pump grip on the pressure tube without the grip having to stick out past the coupler. More photos on the LGLF blog