Jump to content


Photo

Best way to go about a pump action retaliator

Retaliator Pump action Mod

14 replies to this topic

#1 ENP10

ENP10

    Member

  • Members
  • 49 posts

Posted 01 November 2016 - 08:39 PM


So I have a retaliator I'm looking to mod. I know I want it to be pump action but I don't know which way to go about doing it.

I don't have a recon/retaliator on hand (other then the one I'm already using) and I don't really want to go out and buy one so a VGR is pretty much out.

I don't really want to buy the worker kit because of the prices of shipping.

So it is pretty much either between gavin fuzzy's kit or make my own unless there's is some other kit I'm not aware of.
  • 0

I Found some epoxy putty hidden in the basement and freaked out.


#2 Serene Haze

Serene Haze

    Member

  • Members
  • 15 posts

Posted 01 November 2016 - 08:56 PM

You can grab worker kits for a higher price off of ebay, but the shipping is free it seems. Gavinfuzzy will probably be similarly priced after shipping. Otherwise you kinda answered your own question.


  • 0

Proud owner of exactly 1 ST9K Pistol.


#3 OcO

OcO

    Member

  • Members
  • 8 posts

Posted 01 November 2016 - 09:13 PM

I just like helping, so I did the research, I found the best price-quality ratio,
http://www.ebay.com/...wgAAOSwiYFXIClv
If you find any better ones yay, but I found this one.
  • 0

#4 Kilomona

Kilomona

    Member

  • Members
  • 108 posts

Posted 01 November 2016 - 09:39 PM

Making your own isn't difficult or expensive. Coat hangers, tape, an a no cutter is really all you need.
  • 0

#5 ENP10

ENP10

    Member

  • Members
  • 49 posts

Posted 01 November 2016 - 10:02 PM

I will most likely end up making my own partly using this write up: http://nerfhaven.com...te-up-included/
But if I do it may still be awhile till I can since the tools I would need I only have access to sometimes.
  • 0

I Found some epoxy putty hidden in the basement and freaked out.


#6 jaxmeh

jaxmeh

    Member

  • Members
  • 40 posts

Posted 02 November 2016 - 01:25 PM

If you want some top of the line diy shit, check out torukmakto4's Hammer pump Retal build.
  • 0

#7 MavMaster

MavMaster

    Member

  • Members
  • 9 posts

Posted 02 November 2016 - 06:49 PM

So, this thread:http://nerfhaven.com/forums/topic/27208-pump-action-reaper-writeup/ 

is for a different blaster, but you can do this mod even better with the retaliator, because the 1 1/4 inch pipe fits like a barrel extension on the retaliator muzzle. 

 

So you stick about four inches of that on the muzzle,

 

then wrap some tape around the end of a one foot (approximately) long piece of one inch pvc, and shove it in the 1 1/4 inch piece on the muzzle. 

 

Then, you put on the pump handle, and connect to the slide with a scrap bit of junk lying on the shop floor. 

 

And then you have a ugly, but really practical pump.  Am I making sense?  If not, ask whatever questions you like.  Related to the pump, of course.


Edited by MavMaster, 02 November 2016 - 06:52 PM.

  • 0

#8 DICE134

DICE134

    Member

  • Members
  • 86 posts

Posted 03 November 2016 - 03:45 PM

I own one of these grips, and have had no problem http://greendraindustries.tictail.com/


  • 0

#9 Snoop Doggy doge

Snoop Doggy doge

    Fig you, Van

  • Members
  • 501 posts

Posted 03 November 2016 - 05:34 PM

I love my stuff on this thread,
in fact let me plug in another thing I did for the retaliator here

http://nerfhaven.com...ide-vgr/?hl=vgr


I think I like the aesthetics, and I spent like, 10$ total on it? with like 2 hours?
(Pic from PSU) 
Screen Shot 2016-04-11 at 1.10.30 PM.png


  • 0

#10 ENP10

ENP10

    Member

  • Members
  • 49 posts

Posted 03 November 2016 - 05:56 PM

I love my stuff on this thread,
in fact let me plug in another thing I did for the retaliator here

http://nerfhaven.com...ide-vgr/?hl=vgr


I think I like the aesthetics, and I spent like, 10$ total on it? with like 2 hours?
(Pic from PSU) 
attachicon.gifScreen Shot 2016-04-11 at 1.10.30 PM.png

 

 

As i said at the beginning of this post, i don't really want to go out and buy another recon/retaliator and the chances of finding one while thrifting is pretty slim. the best thing I've found is a buzz bee double shot.


Edited by ENP10, 03 November 2016 - 05:58 PM.

  • 0

I Found some epoxy putty hidden in the basement and freaked out.


#11 Snoop Doggy doge

Snoop Doggy doge

    Fig you, Van

  • Members
  • 501 posts

Posted 03 November 2016 - 09:23 PM

can't find a recon?
I know someone that has for pretty cheap, *calls in wild DX*

Otherwise, I can try and make a PVC version lol, 


  • 0

#12 ENP10

ENP10

    Member

  • Members
  • 49 posts

Posted 03 November 2016 - 09:59 PM

can't find a recon?
I know someone that has for pretty cheap, *calls in wild DX*

Otherwise, I can try and make a PVC version lol, 

 

 

Oh i can find one. http://www.ebay.com/...B8AAOSwnbZYDnpM (also i would rather find one while thrifting then order one online)

i just can't decide which way i want to go.

 

i am leaning towards making my own as i said on a earlier post using polycarb or metal bars that are connected to the bolt sled and the retaliator grip.


Edited by ENP10, 03 November 2016 - 10:11 PM.

  • 0

I Found some epoxy putty hidden in the basement and freaked out.


#13 Snoop Doggy doge

Snoop Doggy doge

    Fig you, Van

  • Members
  • 501 posts

Posted 04 November 2016 - 12:05 AM

13$ is way too expensive, 
5$ max for a recon lol

Yay for VGR type mounts!


  • 0

#14 ENP10

ENP10

    Member

  • Members
  • 49 posts

Posted 04 November 2016 - 09:05 AM

13$ is way too expensive, 
5$ max for a recon lol

 

it was just the first one i clicked on. :P

 

kinda off topic but I will also be giving the retaliator a whiteout paint job.


Edited by ENP10, 04 November 2016 - 09:06 AM.

  • 0

I Found some epoxy putty hidden in the basement and freaked out.


#15 IAmAPenguin

IAmAPenguin

    Member

  • Members
  • 34 posts

Posted 14 January 2017 - 01:24 AM

You can try getting the retaliator barrel and cutting the 2 tac rail nubs located on the bottom rail then unscrewing the slide and cutting 2 peices of flat steel bar or polycarb sheet to the correct length. Then bolt the 2 priming bar pieces to both the retaliator vertical grip and the priming slide. Next slide the grip onto the barrel attachment and screw the priming slide in place. I realise that it is not very clear, but there will be a tutorial put up by the one and only penguin (me) soon that will go into great detail on retaliator mods including this one.
  • 0
"If this shit breaks, im'a sue physics." - Me everytime i make something.



Also tagged with one or more of these keywords: Retaliator, Pump action, Mod

2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users