5 replies to this topic

[FoamsFired]

Please include link to product.

[Quack]

Please include link to product.

Without removing the thermistors, your best bet are probably trustfires which aren't that great (they aren't really meant for this application and will be overdrawn in terms of current). You could use IMR's, but those might trip the thermistors. It's not really good to just change the batteries without removing some of the safety components in the circuit.

Edited by Quack, 27 January 2016 - 11:23 PM.

[DjOnslaught]

I agree with Quack on this one. Replacing alkaline with trustfires or imr style batteries while leaving the circuit intact is asking for the electronics of the gun to become damaged.

Most nerf guns are wired with 22-24 GA wire which isn't the greatest for handle high voltage/amp/current loads which is why everyone advocates rewiring with 18ga in addition to removing the thermistors from the motors before using high power batteries.

[Rommel McDonald]

You can run two or three 3.7v Efest IMRs in your RS without risking anything, bringing it up to 7.4 or 11.1v. It's better than nothing.

[FoamsFired]

Please include a link to Amazon.

[nerfsamurai]

Because others have answered this better than I ever can 

https://www.youtube.com/watch?v=SOgf4iBZ_OA