Rapid Fire AS-20 help
#1
Posted 10 May 2013 - 10:16 PM
Anyways, I got it, tried it out, and it seems like it won't store air. It pumps, the bladder (or what I assume is the bladder) fills, but the pump handle shoots back out on its own and it seems to lose some of its air pressure when that happens. Also, it cant mass enough air to fire and cycle at all.
I've opened it up and checked it out, traced all of the lines, and all of the tubing and valves are functioning, however the I believe that the problem is the actual pump. It was a b*tch to open (and the little black box on top was still glued on) so I'm assuming that it hasn't been opened before and everything is still correctly assembled inside of it. Can anyone confirm this or point me in the right direction to look for the problem? Thanks.
Used to commission Nerf guns I guess.
Gallery/Blog.
Facebook page.
#2
Posted 10 May 2013 - 10:20 PM
Edited by roboman, 10 May 2013 - 10:32 PM.
Youtube
LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/
#3
Posted 10 May 2013 - 10:31 PM
As roboman said, I'd say that the check valve is the most likely cause of your problem, it would explain the pump shaft coming out when it's charged up.Sounds like the pump has a bad check valve. Request a sample of these, and pop one in the middle of the tubing coming off of the pump tube.
Good luck with getting it fixed!
Edited by Mully, 10 May 2013 - 10:36 PM.
#4
Posted 10 May 2013 - 11:22 PM
Used to commission Nerf guns I guess.
Gallery/Blog.
Facebook page.
#5
Posted 11 May 2013 - 10:27 AM
Edited by Modded Brain 115, 11 May 2013 - 10:35 AM.
(+'.'+) This is Bunny. Copy and paste bunny into your profile to help him gain world domination.
(")_(") (yes i found this on another profile)
#6
Posted 17 May 2013 - 03:17 PM
Used to commission Nerf guns I guess.
Gallery/Blog.
Facebook page.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users