Jump to content


Photo

Raider Cs-35: Overview / Overhaul

AR removal, sound reduction, double spiring, more

62 replies to this topic

#51 Cadwae

Cadwae

    Member

  • Members
  • 2 posts

Posted 12 September 2009 - 03:45 AM

I was thinking of trying that. What I might end up doing is sawing the tube open then supergluing the thing together. Might try the heated thing first though. Also got to brass up the barrel of the thing too. What springs are recommended for it and where is the best place to buy them?
  • 0

#52 mystefansdontflystraight

mystefansdontflystraight

    Member

  • Members
  • 1,176 posts
  • Location:Toronto, Canada

Posted 12 September 2009 - 11:23 AM

I was thinking of trying that. What I might end up doing is sawing the tube open then supergluing the thing together. Might try the heated thing first though. Also got to brass up the barrel of the thing too. What springs are recommended for it and where is the best place to buy them?


A spring from a RFDG works well. You can buy RFDGs at Cabela's or BassPro shops.
  • 0
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) View Post

QUOTE(white moonlight @ Dec 23 2009, 01:29 PM) View Post

It's just screaming to be rearloading...

I seen a movie about that once.



#53 TantumBull

TantumBull

    Member

  • Moderators
  • 1,929 posts
  • Location:Seattle, WA
  • State:Washington
  • Country:United States
  • u/LukeKoboJobo on Reddit

Posted 12 September 2009 - 01:49 PM

Also got to brass up the barrel

If you do this, be sure to leave about 1/2" of the stock barrel at the front (use a shorter piece of nested brass). This prevents jams and makes it shoot farther than a longer piece. You may see in my write-up that I used a longer piece and I got shitty results with jamming and range. I just yesterday switched it out for a shorter piece. Now my raider, with modified streamlines, hits 50 to 60 ACCURATELY. Which is a pretty awesome for a raider. Unmodified darts go farther but have shitty accuracy. Oh, and this is with a RFSG spring.
  • 0

#54 thebob13666

thebob13666

    Member

  • Members
  • 29 posts
  • Location:OKC
  • State:Oklahoma
  • Country:United States

Posted 22 September 2009 - 07:24 PM

Ive looked and I cant find what a rfdg/rfsg is...soo...what is it exactly?
  • 0

#55 TantumBull

TantumBull

    Member

  • Moderators
  • 1,929 posts
  • Location:Seattle, WA
  • State:Washington
  • Country:United States
  • u/LukeKoboJobo on Reddit

Posted 22 September 2009 - 07:27 PM

Rapid Fire Shotgun... some people call modded ones "Doomsayers" because that's what Angel named his.
  • 0

#56 thebob13666

thebob13666

    Member

  • Members
  • 29 posts
  • Location:OKC
  • State:Oklahoma
  • Country:United States

Posted 22 September 2009 - 07:33 PM

Oh ok...that makes sense. thanks alot...now to go get one
  • 0

#57 pjotrkuh

pjotrkuh

    Member

  • Members
  • 259 posts
  • Location:'S-Hertogenbosch, The Netherlands
  • Country:Netherlands

Posted 25 September 2009 - 09:45 AM

Drum clip:

Front:
http://i53.photobuck...er/IMG_2386.jpg

I’m pretty sure it uses a light torsion spring to rotate. The two black “darts” are one end of the spring that rotates the mechanism as the darts are fired.

Actually it uses the same spring mechanism as a auto return tape measurer (disregard post when this is what you mean by torsion spring), when I pulled the drum apart en removed the orange part that goes in the gun, I accidently pulled the spring out and had to remove the (glued) black roller thing to reassemble it, made me sweat buckets........

Edited by pjotrkuh, 25 September 2009 - 09:46 AM.

  • 0
When the shit hits the fan, you'd better wear a rain coat.....

#58 SchizophrenicMC

SchizophrenicMC

    Member

  • Members
  • 390 posts
  • Location:Arlington, Texas

Posted 25 September 2009 - 10:51 PM

A torsion spring is like mousetrap spring or a clothespin spring. The Raider uses a constant-force spring. (I always call them wind-up springs)

Anywho, did you take pictures? I'd sure like to know what that looks like, should I accidentally screw my drum mag over...
  • 0
QUOTE(NerfUK @ May 8 2009, 11:54 AM) View Post

(I forgot to take a picture of my own poppers)

QUOTE(analogkid @ May 20 2009, 10:04 PM) View Post

Every size rod you could ever want.

#59 wingd man

wingd man

    Member

  • Members
  • 514 posts
  • Location:Austin,TX 78751

Posted 25 September 2009 - 10:59 PM

Compression spring is the word you are thinking of. Tension springs are the ones you have in tech target, dart tag blaster, and maverick triggers. And, yes, torsion springs are the wind up ones.
  • 0

#60 pjotrkuh

pjotrkuh

    Member

  • Members
  • 259 posts
  • Location:'S-Hertogenbosch, The Netherlands
  • Country:Netherlands

Posted 26 September 2009 - 02:58 AM

"Torsion spring" is incorrect, regardless. The right terminolgy is "constant force" spring. Sometimes the term "clockwork" is used, although it's not really the only kind of spring ever used to power clocks.


Did you happen to take pictures during this disassembly? I'm sure people would be interested, even if no one would ever open that part intentionally.



A torsion spring is like mousetrap spring or a clothespin spring. The Raider uses a constant-force spring. (I always call them wind-up springs)

Anywho, did you take pictures? I'd sure like to know what that looks like, should I accidentally screw my drum mag over...


Full cosmetic Drum Mag mod write-up coming up............... look for a teaser in the mod/paintjob picture thread........

Edited by pjotrkuh, 26 September 2009 - 02:59 AM.

  • 0
When the shit hits the fan, you'd better wear a rain coat.....

#61 Diffa8973

Diffa8973

    Member

  • Members
  • 2 posts

Posted 10 October 2009 - 04:53 AM

nice work man

been trying the double spring in the stock mod but just broke my stock trying it :(
  • 0

#62 Guest_neda_*

Guest_neda_*
  • Guests

Posted 21 January 2010 - 10:34 PM

I have made a horible mistake that could lead to the death of my raider (and recon). i did a mod that i normally do in most nerf guns to take the same spring and give it more power. Thats right, i streatched the spring. i tried a million times and it wont go back in. my raider and recon are now worthless and unusable because of this mistake. is there any way i can buy a replacement spring that would fit? If not then that is $50-$60 down the drain. Please help me. :'(
  • 0

#63 NerfKnack

NerfKnack

    Member

  • Members
  • 15 posts

Posted 24 February 2010 - 12:39 AM

very nice job!
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users