I have recently aquired two at3k's and they sucked when stock so I proceeded to take out the air restrictors and replace the barrels. There is one problem with this though, I think I have gotten some debris in the valve or the o-ring is just old, but either way the valve is not sealing so could somebody please help me.
3 replies to this topic
#1
Posted 20 September 2008 - 07:13 PM
#2
Posted 20 September 2008 - 07:35 PM
You could try using silicone lube on it. It works for my splitfires.
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
My TTG mod.
#3
Posted 20 September 2008 - 07:39 PM
Splitfires have a very weird firing system, I don't know if that would work with the usual firing pin setup. It might be worth a try though, not too sure on that one.You could try using silicone lube on it. It works for my splitfires.
Pump the gun up real fast, then fire. Repeat this several times. If that doesn't knock the piece of plastic loose, then you might have to open the tank up, following this guide.
#4
Posted 20 September 2008 - 07:56 PM
Okay so I couldn't see anything downin there but I decided to swab it with a Q-tip and then sprayed it with some more lube. Then being the genius that I am decided to not try to see if it worked and just go back to the computer to see if some one could help me. Well I just tried the pump and it works now.
Edited by veginator, 20 September 2008 - 08:05 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users