25 replies to this topic

[mrcrouse1]

Welcome Nerfers! I recently join Nerfhaven and have used many of these Mod write-ups and decided I should also help conribute. If anyone has any suggestions to make the mod/right-up better, feel free. The pictures aren't the best because I did this right-up after I modded the gun so bear with me.

Materials Needed:
BBBB (Duh)
1-2+ Inches of Sch40 1/2 PVC (You'll need 12 inches for each barrel and 12-16 for each shell)
24+ Inches of Sch80 1/2 PVC (You'll need 12 inches for each barrel and 12-16 for each shell)
1/2 SCH40 PVC Coupling
1/2 inch to 2 inch pvc bushing
2 inch pvc coupler
3 inches of 2 inch PVC per shotgun shell
Hot Glue or glue of choice
Screw Driver
Dremel
PETG Optional (I nested it inside of my SCH80 for a better fit.)

1. First open up your BBBB and cut off the black Barrel and chuck it. (If you want to make a missile launcher attachment, keep it and glue it to 2 inches of 1/2 PVC.)

2. Take your BBBB shell and dremel a whole in the wall right after the tank wide enough so you can fit your 1/2 PVC Coupler In it.


3. Take your PVC and cut about 1-2 Inches of it and glue it inside of your coupling, and then glue it to the base of the BBBB tank.


4. Next Take your 1/2 inch to 2 inch PVC and Dremel the Lip in it that stops the Pipe from going the whole way through it. Then glue your 2 inch coupling to it.


5. Now take your hotglue gun and put a glob of glue on the inside of the shell of the BBBB where your going to be putting the bushing with the coupler, and put glue on the 1/2 PVC sticking out and slide your bushing over the 1/2 PVC about 1/2. (Just enough to seal it so that later you can slide a barrel in the other side.)


6. Take your 2 inch PVC Pipe and cut at least 1 piece that is 1-3 inches long. (If you want multiple shotgun shells, cut more. Then take your 1/2 Sch40 or SCH80 Depending on what you plan on shooting out of it, and cut these into 3-4 inch long segments. (Your going to need 4 segments per shell. Then take your 4 pieces and stick them inside your 2 Inch PVC and load the gaps with glue or FBR and then glue.



7. Put your BBBB back together, and try it out. You should be able to slip 1/2 PVC SCH40 or SCH80 Barrels down the middle of it, and your shotgun shells should fit right inside your coupler.
Congrats! Your Done!





Ranges 100 feet or so with 12 inch barrel. 40 feet with shotgun shell.

Also with the 4 barrel shell you can stuff 8 darts in there for an amazng shot gun blast, and I also made this
SF shell which can get 60+ feet and can fire 4 darts also.



So what do you guys think?

Edited by mrcrouse1, 07 July 2008 - 09:37 PM.

[nerfer75]

Great mod. I've always been fond of shotgun mods.

[mrcrouse1]

Thanks

With AT2k Integration!




I wouldn't want to be on the other end of that on the battlefield.

Edited by mrcrouse1, 06 July 2008 - 02:33 PM.

[BagOfChips]

This is the only mod I've seen that allows you to use both the multi-barrel "shotgun" and a traditional 12" PVC barrel. Quite versatile!
Although, some of the pics are really blurry.

Edited by BagOfChips, 05 July 2008 - 09:17 PM.

[Kid Flash]

I suggest the macro setting for close ups... Thats the flower button... Nice job on the gun though.

[mrcrouse1]

I suggest the macro setting for close ups... Thats the flower button... Nice job on the gun though.

Thanks I used the anti shake settng to try to keep them clearer, but apparently it failed, they're good enough though that you can see the important details.

[NerfCrazy]

Nice mod. I too love shotgun attachments, great for when people rush you or indoor wars.

I suggest the macro setting for close ups... Thats the flower button... Nice job on the gun though.

That may be on your camera but mine is... well I don't know because I set my settings and use a tripod, crystal clear pictures every time.

[mrcrouse1]

Oh, well I did mine in bit of a hurry, as my battery was dying and didn't feel like waiting for it to charge.

Also this concept can be used for basically any high powered air gun like the Titan or LBB

I might also be posting my Simplest AT2k single mod. (Just removed turret, plugged pump, and slipped a piece of petg over the tank. I fits perfect so its like a PETG/Tank Coupler.)

Edited by mrcrouse1, 05 July 2008 - 09:27 PM.

[Kid Flash]

Nice mod. I too love shotgun attachments, great for when people rush you or indoor wars.

I suggest the macro setting for close ups... Thats the flower button... Nice job on the gun though.

That may be on your camera but mine is... well I don't know because I set my settings and use a tripod, crystal clear pictures every time.

Most digital cameras use a flower for the symbol... My last five have at least. And my parents 3 have as well...

[NerfCrazy]

Oh, well I did mine in bit of a hurry, as my battery was dying and didn't feel like waiting for it to charge.

Also this concept can be used for basically any high powered air gun like the Titan or LBB

I might also be posting my Simplest AT2k single mod. (Just removed turret, plugged pump, and slipped a piece of petg over the tank. I fits perfect so its like a PETG/Tank Coupler.)

I did something like this with my titan.

Nice mod. I too love shotgun attachments, great for when people rush you or indoor wars.

I suggest the macro setting for close ups... Thats the flower button... Nice job on the gun though.

That may be on your camera but mine is... well I don't know because I set my settings and use a tripod, crystal clear pictures every time.

Most digital cameras use a flower for the symbol... My last five have at least. And my parents 3 have as well...

Mine is actually a picture of some lady with a gardening sort of hat on.

[mrcrouse1]

Oh, well I did mine in bit of a hurry, as my battery was dying and didn't feel like waiting for it to charge.

Also this concept can be used for basically any high powered air gun like the Titan or LBB

I might also be posting my Simplest AT2k single mod. (Just removed turret, plugged pump, and slipped a piece of petg over the tank. I fits perfect so its like a PETG/Tank Coupler.)

I did something like this with my titan.

Nice mod. I too love shotgun attachments, great for when people rush you or indoor wars.

I suggest the macro setting for close ups... Thats the flower button... Nice job on the gun though.

That may be on your camera but mine is... well I don't know because I set my settings and use a tripod, crystal clear pictures every time.

Most digital cameras use a flower for the symbol... My last five have at least. And my parents 3 have as well...

Mine is actually a picture of some lady with a gardening sort of hat on.

I'm not quite sure which mine is as I got it recently, but it's not that important.

Now I'm trying to figure out how to add an at2k to it since I just removed the goo gauge from mine, and now the tube is too short to fit ino the case now so ya...

Edited by mrcrouse1, 05 July 2008 - 09:45 PM.

[Kid Flash]

The tube is to short to care? what? If you just need to make it longer buy some fittings... They make em to where no glue is needed.

[mrcrouse1]

The tube is to short to care? what? If you just need to make it longer buy some fittings... They make em to where no glue is needed.

Ya, typo fixed it now. I might get the fittings tommorow, but I'd like to intergrate into my BBBB anyways and since the goo gauge is removed this is the perfect chance.

I figured out where I can fit an AT2k into this beast. Probably have that up by tomorrow since I have church tomorrow and will be off soon.

So keyring or integrated into main trigger?

Edited by mrcrouse1, 05 July 2008 - 09:56 PM.

[Kid Flash]

Keyring... Are you putting it into the handle? Like the little grip infront... I planned on doing that but found out my gun was glued shut somehow... I might do it to a different one...

[mrcrouse1]

Keyring... Are you putting it into the handle? Like the little grip infront... I planned on doing that but found out my gun was glued shut somehow... I might do it to a different one...

Did you remove the Orange ring on the front of the gun? That is glued on and goes the whole way around. You have to pop it off. Notice on my picutres how it is missing. And yes in the front handle, it'd be easier if I didn't have the shotgun parts in there.

[Kid Flash]

Yeah I cut that and was going to do the mod to one I did slugs coupler reducer mod to. But I must have glued too much... Hope it all works for you.

[mrcrouse1]

Yeah I cut that and was going to do the mod to one I did slugs coupler reducer mod to. But I must have glued too much... Hope it all works for you.

Thanks, I just cut all of it into half of the shell have to do the other one now, but I off to sleep. Pics will hopefully be up tomorrow evening.

[NerfCrazy]

Keyring for sure. My friend put a 2k in the handle and it works well.

[mrcrouse1]

[NerfCrazy]

I like where you put the pump tube but how do you attach the tubing to the air tank?

[Kid Flash]

I dont believe he has yet...

[mrcrouse1]

I dont believe he has yet...

No I haven't. I'm going to super glue or goop it in though.

I also going to have pvc inside so I can slip PETG in and out of the AT2ks tank so I can use it as a coupler. I'll take some internal pics before I close it, but the glue I used takes a day to seal completely.

Edited by mrcrouse1, 06 July 2008 - 12:38 PM.

[mrcrouse1]

Uploading Pics now.





I wouldn't want to be on the other end of that on the battlefield.

Edited by mrcrouse1, 06 July 2008 - 02:30 PM.

[mrcrouse1]

My At2k still leaks slightly, what is the best sealant to use on this?

[Kid Flash]

A lot of people use goop but I use gorilla glue (its the little pen one)...