#1
Posted 10 June 2008 - 09:30 PM
Then I saw OfAllTheNerf do one, and I thought "Other people are doing it, it must be easy"
So, I promptly bought two nitefinders, some other modding things and alot of PVC tees and PVC couplers as I wanted something to shoot megas.
What I have here is my take on that double nite finder.
As you can see, its NEON FREAKIN GREEN!!! Pretty much my uber color of uber.....ness.
(oh yeah, and my plaid shorts that are hated by my girl)
You now see the maverick I have mounted under it. I wanted some good rate of fire to offset the decent range i get with this double nite finder.
Ranges are shit at the moment, as I was only able to use the stock springs due to lack of funds. This was also only a test project to see how easy it was. Next time I will probably make my own plunger tube and better stuff all around.
Still needs bungees and probably some lubrication.
Venom: Haven't we all?
#2
Posted 10 June 2008 - 09:34 PM
#3
Posted 10 June 2008 - 09:51 PM
I might have to go and do that now.
The only change that I would make would be to remove the stock because its ugly.
with me. This is not a joke. P.O. Box ***,
Oakview CA 93022. You'll get paid after
we get back. Must bring your own
weapons. Safety not guaranteed. I have
only done this once before.
#4
Posted 10 June 2008 - 09:52 PM
#5
Posted 10 June 2008 - 09:55 PM
#6
Posted 10 June 2008 - 10:33 PM
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
My TTG mod.
#7
Posted 10 June 2008 - 10:34 PM
That Mav trigger doesn't look too comfy- when you want to use the maverick, do you flip the whole thing over?
#8
Posted 10 June 2008 - 11:49 PM
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#9
Posted 11 June 2008 - 12:22 AM
#10
Posted 11 June 2008 - 12:31 AM
It looks like the sight is a little hard to use with the stock?
#11
Posted 11 June 2008 - 12:41 AM
Spaz reaction completed, now moving on to constructive critisizm.
clipping the mav might be a good idea, up your ROF a bit. Slaping a breech on that thing might be a good idea, and like you said new spring should be a priority.
Overall though thats awsome, expect to be copyed!
FOR THE WAAAAAGH!
You can fool some people all of the time and everyone some of the time, but you cant fool all the people all of the time, but it sure is fun trying.
What have I got in my pocket? (tolkien)
#12
Posted 11 June 2008 - 06:49 AM
Stock is fugly and will be fixed with more dremeling and goop
Maverick trigger is fine for me. I pull it with my thumb, however, I didn't realize the slide came back to far so sometimes it hits my hand.
Maverick is already clipped, so bwuahaha and has a firefly spring in it.
Thanks everyone for the comments. This was a project to see how easy it was. Next time, everything will be alot smoother.
Venom, this gun was designed for tower rounds. The NF part for the longer range, and the maverick for when you are pushing up the tower.
Did some eyeball range tests last night, and they are shit at the moment. I am very sad, as my single nitefinders get better range with MEGAS!!!
Again, thanks for all the comments. Its a super easy gun to make, and like a xbow or +bow, they are pretty easy to make your own.
Venom: Haven't we all?
#14
Posted 11 June 2008 - 09:38 PM
Please do a writeup! I want one very, very badly.
There really isn't much to write up. Follow dayko's thing and you are good.
But I should throw up a diagram on where to cut for my project.
Venom: Haven't we all?
#15
Posted 11 June 2008 - 09:41 PM
#16
Posted 11 June 2008 - 09:52 PM
Does anyone know what size PVC would replicate the ID of the plunger tube? I also want to do this mod but I can help thinking that glueing the two togeather would just be hell too keep streight.
My plunger rod goes cathunk about half way through for that reason. Its near impossible to keep straight.
Venom: Haven't we all?
#17
Posted 12 June 2008 - 12:28 AM
#18
Posted 12 June 2008 - 05:46 AM
Some people have mentioned that their pet shops sell 9/16" petg. In the same place there should also be 1" petg. I've used it to make longer plunger tubes for my nightfinders and I'm pretty sure its the same stuff Kbarker used in his nightfinder rifle.
Yeah the clear thinwall found at petstores might actually work out well. Its the stuff they use for undergravel filters, I think would be the size that would work. I will check this out when I get home. (I got lots of fishtank stuff) It may just fit and isn't quite as rigid as the normal petg we use for barrels. It has slightly more flexiblity so probably won't crack like normal petg would under the same conditions.
I'm thinking that "cathunk" in the middle of the plunger travel is the culprit for your poor ranges. you're likley losing a lot of your gained air pressure at that point as the seal is broken.
Edited by Blacksunshine, 12 June 2008 - 05:47 AM.
#19
Posted 12 June 2008 - 07:27 AM
#20
Posted 12 June 2008 - 09:22 AM
EDIT: Nevermind, I missed that there was a second page. Nice job anyway.
Edited by analogkid, 12 June 2008 - 09:23 AM.
#21
Posted 12 June 2008 - 04:23 PM
< One foot in death...The other in life. >
#22
Posted 12 June 2008 - 09:09 PM
Some people have mentioned that their pet shops sell 9/16" petg. In the same place there should also be 1" petg. I've used it to make longer plunger tubes for my nightfinders and I'm pretty sure its the same stuff Kbarker used in his nightfinder rifle.
Yeah the clear thinwall found at petstores might actually work out well. Its the stuff they use for undergravel filters, I think would be the size that would work. I will check this out when I get home. (I got lots of fishtank stuff) It may just fit and isn't quite as rigid as the normal petg we use for barrels. It has slightly more flexiblity so probably won't crack like normal petg would under the same conditions.
I'm thinking that "cathunk" in the middle of the plunger travel is the culprit for your poor ranges. you're likley losing a lot of your gained air pressure at that point as the seal is broken.
I was also super impatient with my goop and it probably messed up there, and instead of using e tape like a good boy, I used hockey tape. Scold me now.
Venom: Haven't we all?
#23
Posted 13 June 2008 - 05:13 PM
#24
Posted 13 June 2008 - 10:06 PM
Wait, so you gooped the two plunger tubes together, instead of replacing it with a new tube? That is obviously your problem. I think my petco has the PETG tube people have described. I could sell one to you at SPANO if you want.
Probably the same petco I could go to.
Keep in mind, this was a prelim project. Next time I will probably make it much better, use better parts or just make a +bow
Venom: Haven't we all?
#25
Posted 13 June 2008 - 10:36 PM
Those of you who’ve never known the pain of hamster loss, just remember, your family doesn’t love you and there is no God.
LIVE Gamertag: CitrusyLimeO9. Its the letter o.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users