- NerfHaven
- → Vimes's Content
Vimes's Content
There have been 39 items by Vimes (Search limited from 19-December 96)
#133313 Homemades Picture Thread
Posted by Vimes on 21 December 2007 - 04:36 PM in Homemades
This is my fourth working homemade:
Total Length: 40.5 in.
Plunger travel: 3 in.
Barrel length: 9 in.
Range: 65 to 75 ft.
I’m not sure if it’s a new concept, but the magazine
moves with the bolt while the barrel remains in a fixed position, allowing me to
get the dart as close to the plunger tube as possible
Open:
Closed:
I'm very pleased with this gun, but the ranges fell a little short of my expectations.
Ah well, improvements to add to the next project.
Happy Christmas!
#136530 The Snap-5
Posted by Vimes on 19 January 2008 - 08:19 PM in Homemades
I like the charge rod idea. I usually cut slots in the side of the plunger
housing and run a peg through the gun to slide the plunger back and forth.
This is a much easier design and, like you said, its perfect for the inline clip!
Excellent improvements!!
#136544 The Snap-5
Posted by Vimes on 19 January 2008 - 09:42 PM in Homemades
I used 2 CS-9173(?) springs glued together and put a peice of 1" PVC in the Plunger chamber-behind where the plunger head is when cocked- to support the springs.
Thats a good way to keep the force of the plunger linear.
Hmm...I have an idea, but I can't explain it very well. I'll make a prototype tomorrow if I've got the material and post a pic.
Perhaps if you used 1/2" PVC instead of 1", Carbon, it would fit over the spring better.
#179645 The New Hereti Corp. Assault Rifle
Posted by Vimes on 25 September 2008 - 09:39 PM in Modifications
glue. You only used gap filler CA glue on the bolt sled attachment, right? Have you
had any problems with that breaking, or did you supplement the CA glue
with something else?
Thanks.
#179707 The New Hereti Corp. Assault Rifle
Posted by Vimes on 26 September 2008 - 08:50 AM in Modifications
Now I'm off to get my thinking cap, complete with light bulb.
#179731 The New Hereti Corp. Assault Rifle
Posted by Vimes on 26 September 2008 - 02:26 PM in Modifications
After the last break I cleaned both surfaces and then roughed the brass a little,
using a dremel. Its still drying so I'll see how it works. Is it possible to use too much Zap-a-gap?
#179749 The New Hereti Corp. Assault Rifle
Posted by Vimes on 26 September 2008 - 04:07 PM in Modifications
Thanks for the help guys.
#181298 No...really...this Is A Nerf Grenade
Posted by Vimes on 03 October 2008 - 07:24 PM in General Nerf
the cash. May have to cough some up though.
They were 9.95.
#181487 No...really...this Is A Nerf Grenade
Posted by Vimes on 04 October 2008 - 02:49 PM in General Nerf
Really? You saw these in Austin? Which HEB was it? I may be interested in picking one of these up, if they have ok range.I spotted this at an HEB here in Texas. I thought about getting one but I didn't have
the cash. May have to cough some up though.
They were 9.95.
The one at the Y in Oak Hill. They also had Lanard Over Under twin packs, Tommy 12s, and some other Buzz Bee stuf.
#182285 No...really...this Is A Nerf Grenade
Posted by Vimes on 07 October 2008 - 09:11 PM in General Nerf
other hand the blast radius was excellent, well over 5 feet. With some
kind of barrel replacement and half stefens it would be fantastic. I got the
foam cover off, only way was to rip it, but don't rip it all the way down like I did.
Pictures:
After that I removed all the screws I could find(a grand total of four) and this is what I got:
Yeah I know, big difference.
I think I'm going to have to do some cutting, see how much deeper I can get into it.
Hope this helped.
#182293 The Nerf Schofield
Posted by Vimes on 07 October 2008 - 10:07 PM in Homemades
So, I give you my Schofield, Mk1.
Thanks Captain Slug for being awesome and writing that beginners guide to plastics.
Now, to set this straight, I don't expect ranges over 15 feet. granted some might say
it's a lot of work for not much, but I like building things. Journey, end, old saying...yeah.
I began wanting to replicate Mal Reynolds' pistol from Firefly.
(image found through google)
After a first, rather pathetic attempt which died, I let the idea lie for a while until
I watched 3:10 to Yuma and saw Charlie Prince and his Schofields. After that I went searching and found some pictures of the gun.
(image found through google)
This and a really nifty drawing of the internals, which I now can't find, were the ones I used.
Plunger travel is about 7/8". Yes. Tiny. I know.
The barrel you see is only temporary. The real one will be approximately 1.5 to 2 inches of 9/16 brass, nested in 1/2" PVC.
I'll update as I near completion, but for now, any questions?
#182296 The Nerf Schofield
Posted by Vimes on 07 October 2008 - 10:13 PM in Homemades
Here we go:
This with the plunger head pulled back.
#182303 The Nerf Schofield
Posted by Vimes on 07 October 2008 - 10:29 PM in Homemades
in 1/2" PVC. I'm trying this setup because I want to stick close
to the original dimensions of the Schofield.
NM- its a cut off of a spring from Mcmaster. A slightly larger diameter one than the one CS recommends.
Thanks L0pper, so do I.
#182325 The Nerf Schofield
Posted by Vimes on 07 October 2008 - 11:32 PM in Homemades
is the type of catch. Since it rotates it limits the length of
linear travel. Now, a longer rotation radius would lengthen
the plunger travel, but then it starts to look a little ridiculous.
The barrel in the pics is merely there to be seen. Once I get
the trigger system working I'll set up the real barrel.
rork- Thanks, I really worked to get it to look just right.
#182393 No...really...this Is A Nerf Grenade
Posted by Vimes on 08 October 2008 - 01:50 PM in General Nerf
are posts in the barrels and as far as I can tell there are
some kind of ARs down in there.
Honestly, I'm not sure how well a barrel replacement would
work. The barrel half is glued on and I'm not sure the best way
to get it off, probably cut it or pry it, but that might hit the pump chamber.
Its a very compact little bitch. I'm going to clean off the sides and find
the seam to see if it can be cut.
I just hate it when they glue a gun shut!
#185537 Modification and Paintjob Pictures
Posted by Vimes on 25 October 2008 - 07:35 PM in Modifications
Lock 'n' Load modeled after CXWQ's
And a few others I don't have pictures of yet.
#186631 Stock Arsenal Contest! Win $$$
Posted by Vimes on 31 October 2008 - 12:37 AM in General Nerf
How long did it take you to stockpile all those man?
Ahh my eyes!
#187589 Favorite Rock/metal/alternative Song
Posted by Vimes on 04 November 2008 - 09:49 PM in Off Topic
Lagrange- ZZ Top
Eye of The Tiger- Survivor
All Along The Watchtower- Jimi Hendrix, and Bob Dylan
Drivin Wheel- Foghat
Peace of Mind- Boston
Carry On My Wayward Son- Kansas
Metallica
AC/DC
....I'll stop myself there otherwise we'd be here forever.
Ok last one: Life By The Drop- Stevie Ray Vaughn
#200317 The Nerf Schofield
Posted by Vimes on 01 January 2009 - 09:01 PM in Homemades
I have finished the Schofield to the point of working. It still needs some cosmetic work though, but it is fully functional.
The barrel is 1 inch of 17/32 brass nested inside 1.25 inch of 9/16 brass. I think I may try a few more barrel setups. One would be making the 9/16 brass a little longer. The other would be to add a few tightening rings to the 17/32 brass.
Ranges were unexpectedly good, for the plunger size.
18' 10"
22' 4"
27'
23' 10"
23' 6"
Ave: about 23 feet
I am thrilled with how it turned out. I am working on improving construction, hopefully I can squeeze a few more feet out of it! I'll try to get a video up on Sat.
Happy new year!
#200328 The Nerf Schofield
Posted by Vimes on 01 January 2009 - 09:37 PM in Homemades
Heh...about that 1 inch plunger travel...it got smaller. Yeah, its at about half an inch right now.
I think it has to do with the seal and the spring, especially the spring. It is of similar size to the +bow spring, just a little bit larger in diameter and wire size. The seal is really just about as perfect as it can be, considering the angle it starts from.
I'm going to shorten the bushing that the barrel sets in by a half inch and increase the spring length a little. That way I can get the whole inch of travel.
Oh, my darts are 1.25 inch, just in case anyone was wondering.
#200426 The Nerf Schofield
Posted by Vimes on 02 January 2009 - 01:13 AM in Homemades
I'll get a range video up maybe tomorrow or Sat.
The distance to the cans is about 8' and yes, its Iron Man! And no, I'm not a great shot.
A few things I've noticed while taking the video is that the less used the darts the better the shot. While that's probably true for all blasters, for the Schofield it means a tighter fit is great. With that in mind I will be trying a slightly longer barrel with tightening rings.
Sputnik and Hammer - Just south west of Austin actually, a little farther west than Oak Hill.
#200695 The Nerf Schofield
Posted by Vimes on 02 January 2009 - 09:53 PM in Homemades
I replaced the spring with a slightly longer one( a half coil longer) and added some tightening rings to the barrel.
Ranges have gone up to:
26'
27' 5"
24' 3"
31' 2"
28' 8"
Not too shabby
I decided I'm going to leave this blaster the way it is now and save my other tweaks for Mk2. Which I'll get up here as soon as I get some more Polycarb. Gonna hit up a couple of sign shops tomorrow, see what I can find.
Iron Man rules!
#201049 The Nerf Schofield
Posted by Vimes on 04 January 2009 - 02:39 PM in Homemades
#201635 The Nerf Schofield
Posted by Vimes on 07 January 2009 - 12:32 PM in Homemades
I honestly didn't think anyone would want to buy these, but I guess there are some Old West lovers out there like me. I'll be ordering from Mcmaster today or tomorrow and I'll sit down to make one and see how long it takes. It took a good bit of time for the first one, but now that I've got all the parts finalized it shouldn't be more than a day.
I've actually ordered an old Schofield grip and it should be here in a few days. From that I should be able to fabricate some. for less than what I payed.
As soon as I get Office back on my computer I'll get the templates up. Don't worry, I will get them up.
#204751 The Nerf Schofield
Posted by Vimes on 19 January 2009 - 03:50 PM in Homemades
As of right now I will not be selling these. I might in the future when i get a few tools to make the process easier, but right now its just not worth it.
signing off
#204817 The Nerf Schofield
Posted by Vimes on 19 January 2009 - 07:02 PM in Homemades
Nerf Bros - Uhhh....I'll keep it mind.
MSDFS - Another good one:
"Drugged by God!"
"No, by Baldrick actually, but the effect is much the same."
#205579 The Nerf Schofield
Posted by Vimes on 23 January 2009 - 12:57 AM in Homemades
Thanks guys, I think its pretty cool myself.
Ok last quote ever, I swear: "A special Hell..."
Ah, Firefly...Fox bashing anyone?
#206501 The Nerf Schofield
Posted by Vimes on 26 January 2009 - 01:30 AM in Homemades
A side of nerf - actually its not too bad. Imagine one of those hand workout grip things...a little harder than that.
Kyrativ - yeah the bushing is a little long. It will get trimmed and possibly replaced with something else should there be a Mk3.
#209383 Daft 09
Posted by Vimes on 04 February 2009 - 12:13 AM in Nerf Wars
You should contact the school and just touch base with them, ask them if its ok. I know it'll be in summer and school wont be in session, but its just good business. That way the whole people calling cops thing wont be as big a deal, should it happen at all.
#209542 Daft 09
Posted by Vimes on 04 February 2009 - 06:45 PM in Nerf Wars
i live up in flower mound but i cant think of anything but if your intrested i have an idea its a park but its all the way in hiland village ill try to get the adress its perfect with a big open feild and at the top of a hill at the back edge of the feild theres a gazeebo that would be Effeminate for capture the flag or king of the hill
First person to find the punctuation wins!
Use some grammar dude...Just a heads up.
#211054 Daft 09
Posted by Vimes on 10 February 2009 - 12:50 AM in Nerf Wars
Maybe we should try the old "if you can take a point blank shot in the family jewels from it you can use it" method, or something like that. Any way...lets not get too caught up in the banning of guns. This is our first major war here in Texas so lets make it fun and try to accommodate as many people as possible.
We're on our way people!
#216416 Cell Phone Gun Sight Idea...
Posted by Vimes on 05 March 2009 - 12:52 AM in Modifications
...when your eye is the most complex optical viewing system created by man?
Really? Man created the eye? Did not know that.
But seriously, why look at a little tiny screen at something that is less than 80 feet away?
- NerfHaven
- → Vimes's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·