Ranges are 65-75 with very loose darts. I will get more accurate ranges later.
thedom21's Content
There have been 270 items by thedom21 (Search limited from 28-December 96)
#301683 Modification and Paintjob Pictures
Posted by
on 17 July 2011 - 10:39 AM
in
Modifications
Hoppered reactor, same set up as a HAMP.
Ranges are 65-75 with very loose darts. I will get more accurate ranges later.
Ranges are 65-75 with very loose darts. I will get more accurate ranges later.
#302910 Modification and Paintjob Pictures
Posted by
on 06 August 2011 - 08:57 PM
in
Modifications
Nf with PT replaced and cut down [k26]....has 3 1/4" of draw but still needs some seal work.
Money Shot!
Money Shot!
#292894 Modification and Paintjob Pictures
Posted by
on 15 January 2011 - 09:34 PM
in
Modifications
My first post here
First up my WIP primary. I still need to put a breech on the ls. IT is a LS firefly integration. I got both at a thrift store for a combined total of 3.50
My current primary,
My stampede with an ar removal and an AT2K inside a recon laser light with a recon handle.
My raider,
My PETG sspb
My nf,
My crossfire
And where it all happened
First up my WIP primary. I still need to put a breech on the ls. IT is a LS firefly integration. I got both at a thrift store for a combined total of 3.50
My current primary,
My stampede with an ar removal and an AT2K inside a recon laser light with a recon handle.
My raider,
My PETG sspb
My nf,
My crossfire
And where it all happened
#295869 Modification and Paintjob Pictures
Posted by
on 12 March 2011 - 10:47 AM
in
Modifications
Hand cannon with all the mods except rear loading done by VelveetaAvenger accept rear loading, I did that myself.
Maxshot with PVC coupler
Stormfire with new Plunger tube replacement and a new plunger rod. All parts were made by Venom 213 and I just installed them into the shell.
Maxshot with PVC coupler
Stormfire with new Plunger tube replacement and a new plunger rod. All parts were made by Venom 213 and I just installed them into the shell.
#297394 Homemades Picture Thread
Posted by
on 21 April 2011 - 12:03 PM
in
Homemades
#292895 Homemades Picture Thread
Posted by
on 15 January 2011 - 09:37 PM
in
Homemades
My first SNAP. Still needs a T-joint on the priming rod.
#317625 Homemades Picture Thread
Posted by
on 27 June 2012 - 08:18 PM
in
Homemades
Nice to see another WNTS out there.
I got a proof of concept blaster I guess. I wanted to attempt to make a rainbowpup but the writeup isn't out yet so I made it my own way. It isn't the neatest blaster but it wasn't supposed to be. It was just to see if I could make one functional. I still need to buy the parts from Mcmaster for Ryan's omnidirectional catch and a skirt seal. Other than that I just need to tweak a few things here and there.
I got a proof of concept blaster I guess. I wanted to attempt to make a rainbowpup but the writeup isn't out yet so I made it my own way. It isn't the neatest blaster but it wasn't supposed to be. It was just to see if I could make one functional. I still need to buy the parts from Mcmaster for Ryan's omnidirectional catch and a skirt seal. Other than that I just need to tweak a few things here and there.
#295053 Homemades Picture Thread
Posted by
on 24 February 2011 - 08:24 PM
in
Homemades
Built a prototype today. It is a bolt action SNAP version 1. It gets great range and has some recoil.
#317331 Homemades Picture Thread
Posted by
on 21 June 2012 - 11:15 PM
in
Homemades
Rainbow pistol I started about 3 months ago and just stopped working on it. Decided it was time to finish it up. The whole thing without a barrel is 10" long and has 2" of draw. I need to put a skirt in this because it has a pretty crappy seal with the rubber washers I am currently using.
and primed
and primed
#302303 +bow: Diy Thread
Posted by
on 26 July 2011 - 01:44 PM
in
Homemades
Alright I have a question about my +bow, Does anyone have Templates for single piece sideplates? also Is there a materiel I could use for the sideplates so they wouldn't crack?
#287658 Guide To Barrel Material
Posted by
on 29 October 2010 - 05:07 PM
in
Modifications
I buy all my cpvc from a plumbing supply store called Gopher Plumbing because I get a discount since my bro is a plumber and, it is close to my house. But I did buy some from Lowes and Home Depot about a week ago since I was already there and it works fine for me. Do your darts usually fit into cpvc?
#287671 Guide To Barrel Material
Posted by
on 29 October 2010 - 09:03 PM
in
Modifications
That is exactly what happened to me. My mom bought me some foam and it was 5/8" and wouldn't fit into cpvc and so I went to the store and got new foam. it fit cpvc perfectly.There must be a huge variation because, like I said, I went to each store and took a variety of darts with me, and none of them fit well enough to use. 1/2" Sch. 80 PVC is way too big, and 1/2" CPVC is way too small (i.e. can't even force the dart all the way in)
So far the only success I've had with CPVC is by reaming it out with a 1/2" spade bit. Pain in the ass but at least it sort of works then.
Yes, plumbing varies.
But foam varies even more, and it's much easier to believe your foam is just fat.
#295642 Bs-12 Advanced Tactical Nerf Rifle
Posted by
on 09 March 2011 - 08:20 AM
in
Homemades
That is crazy! Simply crazy.
#295669 Bs-12 Advanced Tactical Nerf Rifle
Posted by
on 09 March 2011 - 05:03 PM
in
Homemades
Would you have/will you have design plans for people who do have the machining capabilities to make this?
#290981 Nerf Irc Room
Posted by
on 15 December 2010 - 09:49 PM
in
Off Topic
I have been harassed a lot lately over a stupid decision and I wish people would learn when enough is enough. People have even brought it to pm's and I got over this decision and I wish they would stop bringing it up. I am going to take a break from NerfHaven and the IRC and when I get back I hope people have matured a little.
#331392 Nerf Elite Mega Centurion - Preview and Internals
Posted by
on 28 June 2013 - 08:45 PM
in
News
Anything yet on the ID of the PT? I agree with shmmee but if we could find something with an OD the the same as the ID of the PT we could cover the tube in silicone grease and insert it and then fill the vents with epoxy putty or even just regular epoxy.
#318189 Augsational!
Posted by
on 08 July 2012 - 08:11 PM
in
Nerf Wars
Hehe I remember that, I actually shot him about a second after that picture was taken.
#302483 JSPB-The Mad Ghost
Posted by
on 29 July 2011 - 12:15 PM
in
Homemades
I was wondering the same thing. I didn't see anything mentioning that in the write up.What's keeping the air from leaking where the trigger is?
#276994 N-strike Spectre Rev-5
Posted by
on 06 June 2010 - 05:05 PM
in
News
I am excited for this to come out. I will be getting one for sure! I think the front attachment looks cool.
#284264 Dartsmithing Tips Archive
Posted by
on 29 August 2010 - 09:57 AM
in
Darts and Barrels
Has anyone tried these McMaster felt tips for slug darts and if so are they good cause they are sure cheap. The part number for it is 8771K22 and it is only $5.87 for a pack of 500. It these aren't good where can I buy felt tips in bulk?
#286170 Dartsmithing Tips Archive
Posted by
on 27 September 2010 - 08:36 PM
in
Darts and Barrels
Okay so I got my stampede and it was what I expected out of the box. Then I decided to do an air restrictor removal and it was horrendously inaccurate. So I tried all of the other things to make streamlines more accurate but none of them worked. So I tried something a little different. I cut it off just below where the hole is like some people do and then I trimmed it so that those little flaps or whatever you want to call them were even with the outer rim. then I filled the space with hot glue but instead of leaving it a dome I wiped it on a piece of paper so the glue filled the center area and was flat not rounded. To my surprise it worked and improved the accuracy with the darts in my stampede and also in my modded crossfires and other guns.
#327534 NDA Exclusive! New 2013 Nerf Mega Centurion
Posted by
on 03 March 2013 - 12:24 PM
in
General Nerf
When did this information come out?The plunger tube itself is supposedly 2 feet long. Add a trigger and priming mechanism and you have a longshot's length but with no barrel.
*edit* NVM read the link in the OP, missed that the first time I read through.
#327530 NDA Exclusive! New 2013 Nerf Mega Centurion
Posted by
on 03 March 2013 - 11:17 AM
in
General Nerf
My guess would be that after its minimized with that barrel for micro's it will be slightly longer than a longshot.Whether or not the extra length is a faux barrel shouldn't matter. If we do end up converting to micros, a 2 foot CPVC/brass barrel would probably be necessary for "optimal" barrel length. It's going to be very long.
#327528 NDA Exclusive! New 2013 Nerf Mega Centurion
Posted by
on 03 March 2013 - 10:41 AM
in
General Nerf
Am I the only one actually interested in these new darts and the "super Plunger"? Those darts sound like nerf's attempt at s sort of 50 cal. ammo. Also I am guessing the whole reason they made it so long is because little kids are their market and little kids love the idea of a Sn1per. I would be willing to bet the extra length is just faux barrel and can be easily chopped off to your hearts desire.
#278288 Big Bad Sexy! A New Take On The Cpvc Barreled Bbb
Posted by
on 22 June 2010 - 04:11 PM
in
Modifications
This topic is over a year old. Read the code of conduct. There also was another person who posted on a year old topic and yet you did it again, unbelievable. Plus, you added nothing significant to this anyways.
http://nerfhaven.com...?act=boardrules
http://nerfhaven.com...?act=boardrules
#300851 New Nerf Guns
Posted by
on 01 July 2011 - 09:11 AM
in
News
I think the design will be something like what is the tornado.
#298123 NIC Homemades Creation Contest
Posted by
on 15 May 2011 - 09:18 AM
in
News
Ryan would it be ok if my blaster was designed to use n-strike clips?
#291920 Homemade Magstrike Piston And Write-up
Posted by
on 31 December 2010 - 12:07 PM
in
Homemades
I am very excited for the write-up!
#293860 Rpmbnb! Updated With More Goodies!
Posted by
on 03 February 2011 - 10:31 PM
in
Homemades
That is SWEET! I will also have to bug my teacher!
#331493 PANB 870
Posted by
on 02 July 2013 - 05:32 PM
in
Homemades
can you take a video of the loading mechanism in action? I think I get how it works but a video would help me and others try to remake and or improve your design.
#331499 PANB 870
Posted by
on 02 July 2013 - 09:09 PM
in
Homemades
Nope I clearly get how it works as I stated but I wanted a video as well.If you can't figure out how it works by looking at it then I question your ability to improve it.
#287422 The Clothespin Trigger Mk2
Posted by
on 24 October 2010 - 10:03 AM
in
Homemades
I am in the process of making one of these and have found that a sex bolt works beautifully in place of the spacer. I am talking about these, http://www.google.co...:0&tx=118&ty=74.
#287122 The Clothespin Trigger Mk2
Posted by
on 18 October 2010 - 06:56 AM
in
Homemades
I am going to try this on my SNAP which I will be using in the MN Halloween war. I will tell you guys how it holds up during a war. Also what is the piece in the back of the tube that keeps the plunger rod centered? Also Major props carbon.
#287433 The Clothespin Trigger Mk2
Posted by
on 24 October 2010 - 02:22 PM
in
Homemades
I went to my local Ace and just bought the supplies to build one and it cost around 21 dollars. That is with 36 industrial strength clothespins and silicone lube. It is 27 with a [k26].
#288835 Nerf In The News
Posted by
on 24 November 2010 - 07:58 PM
in
General Nerf
It also bugs me tremendously that we are grouped with the retards that put thumb-tacks in darts and actually shoot each other. We wear eye protection and take safety precautions at wars. Such as banning unsafe blaster. I like the idea of barrel taps because getting shot close range can hurt sometimes. Like at the MN Halloween war Matt got shot close range by a big blast in the face. Why other people don't like barrel taps I don't know.
#307357 Nite-Jolt - Mini SMG Style NF/Jolt Integration
Posted by
on 14 November 2011 - 07:39 PM
in
Modifications
Holy shit I think we got a good one hear. Keep up the good work, Super clean=super sexy!
#303263 Imperial RCB
Posted by
on 12 August 2011 - 05:30 PM
in
Homemades
I really like this design and am glad I can now build one. Thanks Tantum!
#303267 Imperial RCB
Posted by
on 12 August 2011 - 06:18 PM
in
Homemades
Those hours are the only thing that turned me away from making one.
#294209 Slugs And Domes And Taggers, Oh My!
Posted by
on 08 February 2011 - 06:31 PM
in
General Nerf
You are a little late on that. Kane already beat you to it. http://nerfhaven.com...pic=3861&st=600. (scroll to the bottom)
#299020 Saint Paul Area Nerf Outing 2011
Posted by
on 30 May 2011 - 09:39 PM
in
Nerf Wars
Eric remember those darts you are trading me for the rail.
