- NerfHaven
- → nisaburo's Content
nisaburo's Content
There have been 149 items by nisaburo (Search limited from 21-December 96)
#283935 Modification and Paintjob Pictures
Posted by nisaburo on 24 August 2010 - 10:20 PM in Modifications
With Rev. 2 Slug Breech. Shoots ok.
#302147 Modification and Paintjob Pictures
Posted by nisaburo on 24 July 2011 - 02:58 AM in Modifications
Old and busted
New hotness
wood grip, little changes to the shell and a PCV homemade pump handle. Was starting to look a little too real for my liking so it got a nice splash of paint too.
#269893 Modification and Paintjob Pictures
Posted by nisaburo on 21 March 2010 - 11:02 PM in Modifications
I always felt the recon's slid would make a better fore grip. Pm me if you have a ground breaking suggestion for what to put in the big gap. Right now I'm thinking an integrated flashlight above the barrel with the gap for battery space.
#270165 Modification and Paintjob Pictures
Posted by nisaburo on 23 March 2010 - 11:59 PM in Modifications
First:
Draconis homemade trigger, Rev. 2 Slug breech and extended stock for big boy comfort. No internal modifications done yet.
Next:
Extreme overhaul here. Long barrel, PETG breech, custom wood grips, pump replacement and relocation.
And the breech open. Pretty sexy if I do say so myself.
#288838 Modification and Paintjob Pictures
Posted by nisaburo on 24 November 2010 - 08:22 PM in Modifications
WIP 3k and hornet mavericks
Revisited my HvZ Mav-con
I will not be caught without a magazine!
HvZ RF20; Drop Clip, pump replacement
Cheap-o dollar store pump with metal rod.
War RF20; PETG drop clips, doubled-up spring, innertube'ed bladder, stock for awesome losing.
K-9 Special'ed RFSG
Breech closed
Breech open
Ammo viewing port! Way more fabrication trouble than its worth!
#341719 Modification and Paintjob Pictures
Posted by nisaburo on 03 September 2014 - 09:38 PM in Modifications
#245243 Modification and Paintjob Pictures
Posted by nisaburo on 02 August 2009 - 10:23 PM in Modifications
This baby debuted at the Seattle SOF war and needs to undergo some additional modifications and a paint job.
My PVC couplered 4B with under-slung, minimized rapidfire 20.
#290444 Nerf Barricade - Clip Conversion - Mod Guide!
Posted by nisaburo on 08 December 2010 - 05:23 AM in Modifications
Ha, I like it because its what I said to do!Thanks!
Btw, "moddersunited" over at the HvZ forum has developed the clip conversion further and discovered another way to secure the clips... and his design seems to be able to hold the heavier 35-dart drum mags more securely:
http://forums.humans...pic,2338.0.html
Imho, that's a very good idea!
#290106 Nerf Barricade - Clip Conversion - Mod Guide!
Posted by nisaburo on 05 December 2010 - 12:09 AM in Modifications
#242995 Sof Seattle War
Posted by nisaburo on 21 July 2009 - 03:24 PM in Nerf Wars
Pros:
-Getting some real war experience. This changed how I'm going to think about mods a little bit.
-Got some great feedback about my BBBB/RF20 combo. I know what I need to change now.
-Meeting some amazing nerfers and never really feeling awkward despite not knowing anyone there. Thanks for being cool guys.
-Rushing the flag defenders, taking them out, then not being able to find the flag sitting in the tree right in front of me at eye level.
-Pistol duel with Sam in the first round. Like something out of the movies, right down to the double kill.
-Medic rounds.
-Trading for some of Tantum's spacer plates.
Con:
- Not getting to meet everyone there. We need name tags next time, guys.
- No SOF guys or Draconis
- My foam being just big enough as to not fit properly in my barrels.
Looking forward to the next one!
#208542 Sof Seattle War
Posted by nisaburo on 01 February 2009 - 04:25 AM in Nerf Wars
#232993 Sof Seattle War
Posted by nisaburo on 28 May 2009 - 01:23 AM in Nerf Wars
#242510 Sof Seattle War
Posted by nisaburo on 18 July 2009 - 12:03 AM in Nerf Wars
Thanks guys!
#272289 Dart Door V2
Posted by nisaburo on 15 April 2010 - 10:48 AM in Darts and Barrels
Good work as usual, Cheesy. My only concern would be air escaping on a rscb'd air gun using a tight barrel. I think the next step here is to make the valve open inward, which would prevent pressure differences from opening it and would also lead to a more natural load. I actually may do that with your design, just inverted.
Unless I am completely misreading the pictures, it does open in to the RSCB so it seals from the air entering the clip. The Rubber "C" is glued to the coupler, while the flap is not. Gasket flap can move when you force a dart through the hole in the washer.
This is really great and makes RSCB clipped blasters even more dangerous as they can now be reloaded on the fly with basically no fear of being caught during loading.
#218579 Rf20 Mod - Caedo
Posted by nisaburo on 18 March 2009 - 01:21 AM in Modifications
#295334 Effeminate 2.1
Posted by nisaburo on 04 March 2011 - 01:32 PM in Nerf Wars
Nisaburo, did you replace the spring on your RF20, and, if so, can I haz a part number?
I actually just doubled up on the spring. Unfortunately I just used a random spring in my parts box. I'll see if I can't revisit the mod before the war and come up with and answer for you though.
#295299 Effeminate 2.1
Posted by nisaburo on 03 March 2011 - 06:39 PM in Nerf Wars
#296996 Effeminate 2.1
Posted by nisaburo on 01 April 2011 - 02:23 AM in Nerf Wars
PM me with a pick up point, I think I can swing by and pick you up on the way.Sounds good. I just went on a buying frenzy, and need to clear stuff out.
That said, I was wondering if anyone was passing through Bellevue tht I can hitch a ride with? I don't drive, so the three or four miles from home to the park is a huge timesuck.
EDIT: Amendment to my sales list, blue longshot, stock but faded SM1500 old style and possibly a max shot if I get a good enough offer.
#296687 Effeminate 2.1
Posted by nisaburo on 27 March 2011 - 02:26 AM in Nerf Wars
So what are people bringing for trade or sale? Thought I'd give a sneak peak:
lightening blitz, new style sm1500, AT3k, a few first gen nitefinders, longstrike, purple BBB and some other stuff.
I'm also taking a page from Taerkitty and will be bringing a tub (literally a tub) full of parts, shells, partial blasters and stuff FOR FREE!
#279530 Battle Max Markerball Sceptor V1.0
Posted by nisaburo on 05 July 2010 - 04:55 AM in Modifications
Looks like I chose a bad time to post my "Mirage", this is really cool, and in terms of performance is a stronger, and smaller version of the mirage with a higher air capacity. Nice!
I was just wondering, how does the valve in this thing work? And what are the internals like?
The trigger valve in these is what has been described as a hammer or momentary valve. It uses a spring and a weight to quickly open and close a valve between the tank and barrel.
#279169 Battle Max Markerball Sceptor V1.0
Posted by nisaburo on 01 July 2010 - 02:05 PM in Modifications
#191634 Crooks-bow
Posted by nisaburo on 24 November 2008 - 03:27 AM in Modifications
#301924 making an N-strike compatible wooden stock using Rhino - input needed
Posted by nisaburo on 20 July 2011 - 09:02 PM in Modifications
#302167 making an N-strike compatible wooden stock using Rhino - input needed
Posted by nisaburo on 24 July 2011 - 11:55 AM in Modifications
Not really. Almost any way you spit that into two pieces will have undercuts. Unless you have a really fancy 5 or 6 axis machine it won't be able to cut it. I suggest you tak to the person cutting it for you about what the machine limitations are before you get too deep in th design.Good point. I was about to say "i won't be the one machining it" and then I had an idea: cut the model in half on the computer and have the CNC machine just grind out the two halves and then glue them together. Problem solved.
#270967 Nerf Mg Write-up *updated*
Posted by nisaburo on 01 April 2010 - 12:29 PM in Homemades
#244281 Sano
Posted by nisaburo on 28 July 2009 - 12:22 AM in Nerf Wars
#276823 Epic Summer War Part 3
Posted by nisaburo on 04 June 2010 - 04:35 PM in Nerf Wars
Put me down as a definite maybe.
I have a bag of Nerf junk - blown mods, parts and bits, etc. No springs, sorry. I'll bring that along to get it out of my house, if anyone's looking for scrap plastic.
I'm always looking for maverick shells with grips in good shape. Can you help me out?
#276522 Epic Summer War Part 3
Posted by nisaburo on 31 May 2010 - 06:35 PM in Nerf Wars
Freyer, will you be providing a list of whats available of should we just look the the pictures in that other thread and ask if something is available?
- NerfHaven
- → nisaburo's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·