I have decided after a long while to put my lame, but very cool, skills in html to work. After long hours of thinking, really about 5 minutes, I decided to make my nerf gang a website. I was hoping for comments and feedback through NerfHaven before I went to far. Thanks for the help guys!
The link to holiness
- NerfHaven
- → Viewing Profile: Topics: Jay Dub
Jay Dub
Member Since 17 Jun 2004Offline Last Active Apr 08 2006 11:19 PM
Community Stats
- Group Members
- Active Posts 19
- Profile Views 2,129
- Member Title Member
- Age 35 years old
- Birthday May 22, 1988
User Tools
Latest Visitors
Topics I've Started
New Website
26 April 2005 - 09:16 AM
Razorbeast Redone Ideas
27 March 2005 - 01:17 AM
Hello fellow Nerfers,
I was just looking through my arsenal and found an old razorbeast. I ripped it open and started brooding ideas. So far this is roughly what I thought I could do. Take all guts out and discard. ( This is the reason I thought it would be suitable to put this topic in the homemade section. ) I plan on creating a spring gun, for the simple reason that a pump would be similar to my other guns and the awkward position the pump would be in. Most likely the spring would be bolt-action, but not a copy of Bolt-losers beautifully put together rifle. I plan on keeping most of the razorbeast shell but put the trigger off to the side of it. (It just fits my hand positioning when I play.) Some questions remain though:
1) Should I use a breech load or 3dbbq's barrel for this gun?
2) Does 3dbbq's barrel work decent with a spring gun?
3) Could it be possible to make interchangeable barrels between a breech and 3dbbq's?
4) Is there a way that a shell-less clip could be made to fit into the razorbeast, preferably onto the breech? (I'm still looking around and working on shell-less clip ideas.)
Again here is the briefing: trigger on side, bolt action, and keeping most of the outside.
Ideas and answers would be appreciated. Thank you.
-J_Dub-
I was just looking through my arsenal and found an old razorbeast. I ripped it open and started brooding ideas. So far this is roughly what I thought I could do. Take all guts out and discard. ( This is the reason I thought it would be suitable to put this topic in the homemade section. ) I plan on creating a spring gun, for the simple reason that a pump would be similar to my other guns and the awkward position the pump would be in. Most likely the spring would be bolt-action, but not a copy of Bolt-losers beautifully put together rifle. I plan on keeping most of the razorbeast shell but put the trigger off to the side of it. (It just fits my hand positioning when I play.) Some questions remain though:
1) Should I use a breech load or 3dbbq's barrel for this gun?
2) Does 3dbbq's barrel work decent with a spring gun?
3) Could it be possible to make interchangeable barrels between a breech and 3dbbq's?
4) Is there a way that a shell-less clip could be made to fit into the razorbeast, preferably onto the breech? (I'm still looking around and working on shell-less clip ideas.)
Again here is the briefing: trigger on side, bolt action, and keeping most of the outside.
Ideas and answers would be appreciated. Thank you.
-J_Dub-
J_dub's E-pos
25 August 2004 - 09:51 PM
This may be the better idea for a pistol. Behold the Evolved -Piece Of Shit.
This is only two shot and less triggers than the MT-pos or maybe not. its up to you to decide.
Paint was being stupid on my comp so here is the idea...
1) Look at the pretty colors, then pump the gun with valve 3 open only.
2) Look at Carmen Electra's poster that i know you all have, then close valve 3.
3)open valve 1 = 1 shot
4) open valve 2 = next shot.
Its only meant to have 2 bullets, for a refrence in size.
The pin in the breech is for bolt action reloading.... pm me if you have any questions about that.
This is only two shot and less triggers than the MT-pos or maybe not. its up to you to decide.
Paint was being stupid on my comp so here is the idea...
1) Look at the pretty colors, then pump the gun with valve 3 open only.
2) Look at Carmen Electra's poster that i know you all have, then close valve 3.
3)open valve 1 = 1 shot
4) open valve 2 = next shot.
Its only meant to have 2 bullets, for a refrence in size.
The pin in the breech is for bolt action reloading.... pm me if you have any questions about that.
J_dub's Mt-pos
23 August 2004 - 10:17 PM
Here it is, the Massed Together - Piece Of Shit.
Most props to ShortShit for being helpful, other props to 3dbbq and others.
Mainly i put 3dbbq's barrel in a breech and put the air into the front and back with vavles for semi auto. . . IN PROCESS of being made. This is a simple semi auto pistol-main gun. It depends on the size it comes out as. It fits 3 bullets into the barrrel at a time for a pistol, and 5 for a main gun.
Most props to ShortShit for being helpful, other props to 3dbbq and others.
Mainly i put 3dbbq's barrel in a breech and put the air into the front and back with vavles for semi auto. . . IN PROCESS of being made. This is a simple semi auto pistol-main gun. It depends on the size it comes out as. It fits 3 bullets into the barrrel at a time for a pistol, and 5 for a main gun.
- NerfHaven
- → Viewing Profile: Topics: Jay Dub
- Terms of Service and Privacy Policy
- Code of Conduct ·