Jump to content


Gatman600

Member Since 26 Jun 2007
Offline Last Active Sep 24 2009 02:46 PM

Posts I've Made

In Topic: Non-nerf Applications Of Nerf Guns

15 September 2008 - 05:40 PM

I use my bbb and singled titan to shoot at pesky squirrels and chipmunks in my mother's garden. But, my friend and i had a target competition using 2 singled titans and the unmentionable death darts but made with full length nails and a sheet of 3/4" plywood with a dart board painted on it about 80' away, needless to say it was a good time we had to use pliers to get teh darts out of the plywood.

In Topic: Magstrike Bladder

27 August 2008 - 09:52 AM

Thanks Slug, the gun is doing fine and we have been running extensive tests so the bladder seems to be holding up at about 65psi so I figured it was rated for about 70-75psi. The check valve in my friend's magstrike broke so we took out the old pump and epoxied a bike inner tube stem valve into the tubing and took out the pump. So now we just hook it up to a bike pump, in about 3 pumps we're at 60psi and thats good for about 2 clips 3 if you're careful I'll post pics and write up in another thread.

In Topic: Magstrike Pump Issues

25 August 2008 - 10:30 PM

We scrapped the old check valve in the magstrike and replaced it with a stem valve from a bike tube. We also banded the bladder with an inner tube so we get about 3 clips out of it, but now there is no pump on the gun. All you do is hook up a bike pump to the valve pump it up to about 50-60psi and off you go, my friend doesn't use it as his primary so he only gets 2 clips out of it most of the time. I'll post a write up tomorrow.

In Topic: Magstrike Pump Issues

24 August 2008 - 06:09 PM

Thanks for the help guys but I'm either going to install that check valve, or I'm going to do a big overhaul involving a bike pump which could be cool. I'll post a write up if I do it.

In Topic: Broken House Hold Items

24 August 2008 - 05:11 PM

I've broken mostly small things, empty plastic containers with my singled Titan, or holes through my mom's table clothes testing my nightfinder, the worst so far was one of my friend's insisted on putting a nail in the end of a dart (do not try at home, stupid idea) and we sunk it 3/4" into plywood from 60' with his singled Titan.