Jump to content


nisaburo

Member Since 09 Apr 2007
Offline Last Active Mar 26 2020 06:07 PM

Posts I've Made

In Topic: Nerf supermaxx 5000 tank leaking. Solutions or at2k tank?

17 April 2017 - 04:58 PM

If its actually leaking back down the line then it sounds like a bad check valve in your pump. Swap the pump and see if you still have a problem. A pump swap should be very simple and leave you with a wide amount of options for substitutes.

In Topic: 95 Crossbow Clip Fed?

27 February 2017 - 01:43 PM

Both these blasters work in a very different way than any modern clip fed blasters. Instead of chambering a dart from a clip into barrel, the clips on these blasters ARE the barrels and get whole clip is advanced up or down via a tooth.

Your visions of a 35rd drum couldnt really be acomplished with this style.

In Topic: Nerf war in Seattle (Greenlake area)

05 January 2017 - 01:53 AM

Here is a great article on things to consider when hosting a war.
http://nerfhaven.com...ost-a-nerf-war/
We dont want to discourage you hosting, quite the opposite! We just want to make sure everyone knows what to expect so we can make the most of a somewhat rare Washington war!

In Topic: Nerf war in Seattle (Greenlake area)

04 January 2017 - 03:49 PM

I would be interested in going and have been involved with wars in the greater Seattle area for years. I have also have some questions/notes
- are slugs and or domes allowed? My understanding of FVJs are they are esentially solid tipped stock darts.
- have you checked for reservations of that site?
- in the past we have had slight issues with unaccompanied minors from a liability standpoint to the point we put a minimum age unless with a guardian.
-banned blasters are a good idea.

Let me know if you have any additional questions about war considerations!

In Topic: Range Master Probelms

21 December 2014 - 08:55 PM

The rangemaster has a style of tank that the NIC refer to as a back pressure tank. This means to fire the main tank a small amount of air first gets vented from was is refered to as a blast button. So on that side your internals sound like they are operating fine. Sometimes you can disrupt the firing by not allowing the blast button to vent properly. For example, your finger might create a seal.

What modifications did you do to the blaster itself, thats how we can start to see why your ranges are so bad.