STCVKR

I'm proud of you. You glued a barrel onto a SuperSoaker, built a cardboard box around it, and then had the courage to post it here. Good job.

Look at my sig kid.

Wow dude, you're not very hospitable are ya? I'm pretty sure I mentioned that some parts were from a water gun and that 'cardboard box' is mdf, y'know the man made wood.
But y'know whatever. If you wanna get your moderator friends to shutdown this topic then be my guest, I only posted it to show that I was active on nerfhaven so that my account didn't get deleted and crapzorz, take it away if you want.

my pistol splat broke recently, I'd be happy to give you the priming lever if you pay postage.
Sorry if this post breaks any rules.

You supplied pictures, but I still don't get what to do. What parts are *necessary? I highly doubt it gets up to 100 psi and shoots 100. The Titan, with a smaller tank, goes 200 with 60 psi.

this isn't a tutorial and I can believe that it doesn't shoot 100 ft at 100 psi. I only pumped it twenty times because to stand there and pump more than that is time consuming and could lead to being shot. I merely stated that its regulator/limiter activates if it reaches 100 psi.

@ Ubermensch. No the orange part hasn't caused jams yet and I've had the gun for quite some time, also it doesn't look quite as shapely without it.

@JATDO The ranges are not brilliant, it gets similar to a stock recon, but I use it like a shotgun so that doesn't bother me. The rate of fire is ultimately as fast as you can pull the trigger, but you have to be careful to pull it all the way back or the dart will not leave the barrel and left untreated will cause a jam. I can get the whole thing emptied in an average time of 6.24 seconds (tested 10 times and averaged). So it's relatively fast, but it's more practical to fire off bursts of 2-3 at a time.